torowh523dxi 0 #1 Posted October 20, 2010 My 523Dxi, model 73550, has developed sloppy steering. The mechanical bits are tight. Does anyone have some thoughts on this issue? Thank you Share this post Link to post Share on other sites
wh500special 2,053 #2 Posted October 20, 2010 523Dxi If you haven't already, try cleaning the power steering filter. It is located in one of the hoses behind the left hand side air intake below the steering wheel. Remove it from the hose, rinse it out with solvent, and reinstall. To bleed the system after installation start the engine and turn the steering wheel both left and right to its stops repeatedly. Toro offers a service manual for your tractor that details everything. If you can find a copy from a local dealer or eBay it is money well spent. Good luck with an AWESOME tractor! Steve Share this post Link to post Share on other sites
Philnc 4 #4 Posted December 24, 2010 Sorry....may be a little late to this party...but anyway....my 523dxi's steering was sloppy until I set the toe in.Was toed way out for some reason. Hope i'm not too late to help Share this post Link to post Share on other sites
rickv1957 70 #5 Posted December 24, 2010 :ychain: :D Share this post Link to post Share on other sites