Leaderboard

This is my first post on the forum. I am about to do my first lawn tractor build. My dad picked up this ltitle Wheel Horse for my kids around 6 years ago, he never done anything with it. A little over 2 years ago he died. It has been setting there by his barn reminding me of him and his purpose for having it. Today I picked it up and brought it home to my workshop and started disassembly on it.

Prairieland Heritage Museum in Jacksonville, Illinois will have a Swap Meet and Sale on March 11, 2017. The Wheel Horse items of the lat Earl "Tuffy" McEvers of White Hall, Illinois wil be sold at this Swap Meet and Sale. Earl attended the 2013 Prairieland Show that hosted the Wheel Horse as the tractor of the year. EARL'S SMALL SCALE Road Grader on You Tube: He was famous for his smaller scale road grader made from a Wheel Horse hydro transmission that used a 1 /1/2 Horse International Harvester water cooled farm motor.

I use sealed on my show horses so that I don't have grease on my wheels. I use open on my workers so they can be well greased to keep water and dirt out. It's all about personal preferences.

Kids are a blessing and boy do they grow up fast. I'm happy for all of you gentleman and certainly see the pride you have in your grandchildren. As a side note, my supervisors daughter was good enough to get a full ride at a good university for softball. I hope that can be the case for you as well.

FEL is that not a front mount crane ? eric j

Well the weather was perfect and the show was busy. I got to take some pictures but for the most part I spent the first part of the morning buying the gt14 and then the other half trying to figure out how I was going to load/unload it when I did het it. Walking along there were some neat things here and there. Just some of what we saw is here. Some red, some yellow and yes, some green. And then there is that gold,green and blue thing I bought. Had a good time. And my treasure

I think it's risky no matter what you use or how you do it.

2017 "Power from the Past" Show Flyer . Held in Winamac, Indiana -this is always a good show. I have been attending for seven years!

Okay...I have a friend who is a honcho at a local power tool rental shop and he called me this morning to offer me this hydraulic hose crimper. It's an oldie for sure (he says it was there when he started 28 years ago). Anyway, I'm not about to pass up a freebie such as this, so here 'tis. It's a bench mount, but unfortunately I don't have room on either bench at the moment. There might not be much of a cost saving factor here because of my cost for hose and fittings, but I have to check it out.

Before you order new parts from a dealer.....think about whether a used part would work. We have a great list of vendors in our classified section that offer used parts. I bet one of them could have set you up with the correct length choke cable for much less than $63. Mike.........

Thanks Doc. I don't know what I'm going to do with it yet. I have no clue how it runs. I'll get the model when I get up there next week. My Wheel Horses will keep it in line.

Many of you know about our move back to our home state of Indiana. Well, the closing date has been set for March 10th. I just found out yesterday that the seller is going to leave these two items. There's a lot to mow and I actually thing the seller is trying to do me a favor. She doesn't know that I have real tractors The Agri-Fab will probably get some red paint and I'll just use the trailer to haul the grandkids around. I can see that the mower has an 18.5 hp Kohler Magnum twin and a 46" deck. Does anybody know the model? On my trip up to close I've got a cargo trailer reserved and I'll be bringing my Wheel Horses up. The plan is to leave them up there along with my truck and fly back here. We will then have a semi trailer sitting in the drive to haul everything else. Once we close on this place my wife and I will come back up in her car. When I unload my tractors I'll be sure to keep them as far away as possible from this thing.

Picked up another RJ-58 today that a guy had in his yard. Not as good as my last find but not too bad for $175. No original engine but it had the pulleys from it, belt guard, muffler guard and serial sticker. Hood has a couple small dents but in decent shape otherwise, no holes. Front rims are not rotted and the fuel tank is in good shape too. Check it out. I'm cleaning it up. Ill get a few more pics up soon.

UUUHHHMMM...Front right tire, 5th tread pattern from the bottom on the inside - I see some dust on the tire...

Send a PM to @Shynon...I've watched him remove paint off of original decals with good success.. Just can't remember what he used..

Are you going to repaint the hood? If so remove the decals with however you are going to prep the hood and put new ones on. If not @stevasaurus knows a way to do it.

Is it just overspray, or actually painted over. If it is overspray I would start with something like WD-40 or Seafoam Creep.

Millions of New and Used Onan parts available. Intakes are the same on the P216, P218 & P220 engines. Same carb on the 16HP & 18HP. 20HP carb only the jets are different.

Richie: I was down there at the Flywheelers on Tuesday, Wednesday and Thursday. Tuesday is vendors setup day but they sell a lot of stuff. I was there selling stuff with Rodeny Burger of Roachdale, Indiana. I saw Terry Wolfe and his display from Greenville , Ohio, another Red Square member. I took some pics too and will add here. I had a great time an except for Wednesday's rain the wether was great! They needed the rain down there though -it was awful dry and quite a few grass fires. Saw a Wheel Horse for sale that had an Anderson, Indiana dealers decal on it!

Thank you Sarge will take that tip under advisement and thank you Denny, I find it takes less work by paying attention to the little stuff when building then to get it assembled and say "why the #@€& didn't I think of that when I had it apart and easy to do?!?!

finally got around to cleaning the nos one up

Looks like you have competition!

I got 4 of the horses in the barn.

Check it out! I found this RJ today as a lawn ornament. I knocked on the door and the guy ended up selling it to me for $200 with a plow and mower deck in awesome shape and all the manuals and receipts and even spare parts! I couldn't believe it. Hood has been repaired but its not destroyed, no muffler guard (typical), but its the original engine, belt guard, serial # sticker. Attachments are in remarkable shape compared to what I've seen. The skid shoes on the plow aren't even worn. Heres a couple pics, Ill take more tomorrow.

Decided to flip the deck carrier over the right way & check the belt Monday, this is how it looks as of last night.

Its kinnda funny,,,,when the tractor is together,,,it seems like just a few parts,,,,, but when she is apart,,,,it seems like a million parts...... thank -you for the 1st 1/4 pics,,,,,,cant waite till the 1/2 time show......... GO TEAM !!!!!!!!!!!!!!!!

That's what I was thinking Doug. I can wear sunglasses and maybe nobody will recognize me on a Craftsman.

Thanks Terry!. Saved for future fabrication.

to the Kool tractor and nice story. Thanks for sharing.

"FREE" is my favorite 4 letter word!

I have a couple horizontal AYP GTs and appreciate them. Both are 3x2 speeds like our 8spd WH. Don't have any experience with their hydros.

A loader is definitely on the list of future projects!

If you go to the "Manuals" section on this site you can download your manual.

and sorry to say this but welcome to our world of some parts costing more than what you paid for the tractor. Do your research on parts availibity and use your shout out here should you need help. Sounds like your off on the right foot.

Well guys I started on the 1054 the body seams to be in really good shape. I got the new front tire on, it came with 1 new tire and rim but I have to pull it back off. As I was trying to mount the tire I used silicone spray and it messed up the paint that I sprayed on the rim. I made a new seat and backrest for it. I had to buy a industrial sewing machine but they came out really good. I wanted to make it red like @Martin did, I really like what he did to his. Mine won't come close to his but it will be a lot nicer then what it looks now. @Lane Ranger made his like the original white/black . The seat needs the wood wedge cut from a 2/4 and the padding added but its ready for mouning after I clean and paint the seat frame. All the sewing is done.

The last one with metal tank is the setup up until early 68 before they switched to the red plastic tank with longer platform which ran until 73 and then in 74 they went to the black plastic tank same size. My early 68 Raider 12 is just like the last pic too which is before they switched. The first black plastic tank I'm not sure of but would also like to know. Here is my 68 Raider 12 for comparison which is completely original

He just needs a to pull him out.

Just picked this up this weekend. I have mostly wheel horse but Always wanted one of these.

I use EZ-Slide under my decks. I prep using the usual methods but I paint the underside white before the EZ-Slide application., That way, I can monitor the need to touch-up the coating during the season.

We are starting small. Eventually we may work up to one of those.

Bob is one of the best. Gonna miss him at the show this year. Not wanting to turn this into a brand bashing thread but: I like everything IH That is except their owners. We have a big IH club right where I live as well as a JD club. Every show around here I have trouble with these guys. I get there claim a spot and an hour later I'm asked to move or my stuff is moved for me! The IH club needs the room. The JD guys invite me to park my little red tractors with their green ones!

A D200 followed me home from Missouri. It has a blown engine so I am pulling the 20hp Kohler out of my D180. Is it just the two bolts I can see to seperate the flywheel from the pump? I have everything else off, ready to pull. These bolts:

It has been my experience that "things always get a little complicated" when in a situation such as this!!! Jim

Found the culprit. An intermittently bad clamp connector. Kinda wet but I took it for a spin. Next step......the loader! My wife keep telling me I have a Wheel Horse problem...I contend I have a too small of a shop problem....

The Big C to the rescue.

Nice. It appears to be a 1966 since the foot rests appear to be bolted on and it has the wording "Variable Speed Drive" on the dash. What's the serial number and type code? In 1966, Deere would use a different type code for not only the tractor model, but the tire and rim set up. See the charts below taken from the operator's manual. BTW, if need any manuals, pm me with your email address and I'll send you some. I have a '66 also. Pages from SM2059 Apr67.pdf