Classifieds: Classifieds

606 Rat Rod

Thu, 01 Jan 1970 00:00:00 +0000

Got this as a roller and installed an unused Predator my dad had. This was my snow pusher until I put the fat tires on it. I upsized the pulley so the top speed is 8 mph. It pushed snow in high gear with no problem. It has oversized tires and wheels and it starts on the first pull every time. It also has fluid in the rear tires. The machine is very straight. Below are the old pictures when it pushed snow and how it looks now with the fat meats. @WHX?? has offered to get it to his 10/16 plow day if someone needs hauling help.

IMG_5963.mov

42" Side Discharge Deck....LIKE NEW

Thu, 01 Jan 1970 00:00:00 +0000

Hate to part with it, but the time has come....Tired of storing it under the Monte Carlo SS in the Garage...

Deck is like new, and the blades are new. Spindles are perfect also. No disappointments.

thank you, John

520-H Restored w. deck, snow plow, & weights. SOLD

Thu, 01 Jan 1970 00:00:00 +0000

1992, Wheel Horse 520-H. Onan overhauled: New rings, cylinders honed, valves lapped, new carb., new seals and filters, new fuel lines and primer bulb for easy starts. Seat is like new. Front tires are new. All tires hold air. Some repainting, but didn't need much; was stored indoors. New decals. Other new parts.

Has swept front axle and Variable Ratio Steering. Belt cover ventilated to cool back cylinder. Rear wheel weights are 55 lbs. each.

1965 and 1966 Wheel Horse

Thu, 23 Sep 2021 12:14:50 +0000

These were my Grandpa's trackers. To our best knowledge the one with the mower on it is the 1965 and the one with the plow on it is a 1966. Both are manual transmissions. The one with the mower just recently, the shifter is not shifting gears and feels loose. If I get the time I will fix it and get both of them fired up and running before a visit to see them. All I have to do is clean up the carb and install a battery. I used both trackers last year and cut regularly with the mower deck one (front yard only) and use the one with the plow every winter. They are stored in my shed year around as you can see in my pics. I also have a spare transmission that will be included as well has a spare mandrel for the mower deck.

1-1/8 HUBS

Wed, 22 Sep 2021 21:18:27 +0000

In need of some paint. The key ways are perfect.

Tractor 953

Mon, 20 Sep 2021 15:25:52 +0000

Wheel horse tractor.

C125 With a 42" snow plow

Mon, 20 Sep 2021 00:43:07 +0000

1980 C125 / 8spd with a 42" snow plow. Tractor has been fully serviced and runs strong. New items include: rear axle seals, shift boot, air filter& pre-cleaner, new fuel lines, tank grommet, fuel shut-off, brake shaft seal, spark plug, throttle & choke knobs, foot pads, front wheel bearings, PTO brake; rear axle was flushed and filled the correct weight gear oil, engine oil changed. Front and rear wheels were professionally refinished in the correct shade of off-white giving the tractor a great patina look. Headlights work but hour-meter does not. Rear plastic fenders have 2 small cracks but no missing pieces. Overall a strong running unit that's ready for winter. Plow and chains included. Cash only at the time of pick-up. No third party involvement: if you are the buyer you are the one picking it up. Can deliver or meet within a reasonable distance of 17801 zip code.

B-115 5-speed

Sun, 19 Sep 2021 23:55:21 +0000

Blackhood B-115 5-speed for sale. Exact year unknown, S/N tag unreadable. $50.

Engine spins, but sounds labored while cranking. Won't start, spark seems erratic. Trans axle seems to be locked up, possibly stuck in gear.

Frame is solid, seat is pretty good condition, body sheet metal is all in good shape, mower deck seems intact, but I haven't removed it for a close inspection.

May also be willing to trade for parts for 855 or 800 Special.

Able to deliver, within reasonable driving range.

8”/12” WH Wheel Covers

Thu, 01 Jan 1970 00:00:00 +0000

I have a full set of hubcaps that are in very good condition. Inside one of them has a small amount of surface rust that could be cleaned up and treated. The front of them are excellent except for light scratch here or there if you really look closely. I also have a second set that includes the 6 inch and the 12 inch if interested that I will be listing soon.

416-8....Super clean, plow,weights. Ags. Magnum. PICTURES POSTED

Sat, 18 Sep 2021 22:54:00 +0000

416-8 clean machine, one owner, M16 Kohler...............no smoke, knocks, etc. Only 771 Hours.

42" Rear Discharge deck NO RUST blades used 1 season

48" plow very nice condition,

Wheel Horse weights, on tractor already

AG Tires on rear,used one season, front tires great condition. Rears are filled with beet juice, done at a Dealer professionally, ....non toxic, non corrosive. Traction Galore !!!

Machine is fully serviced, ready to work. NEEDS nothing....Look below for pictures

JOHN 845 797 5716 cell

416 - 8 Toro Wheel Horse with 44" 2-stage snowblower

Sat, 18 Sep 2021 18:42:58 +0000

Starts right up everything works as it should, does need some TLC, like a new seat and tune up, etc... Front tires are showing some dry rot but are still holding air, rear tires are only a few years old and are fine. It does need the three plastic chute holders as I just snapped all three installing on to the tractor. ( note to self don't lean on the chute, lol) If it doesn't sell right away I will be purchasing a new seat and holders for it as well as a complete tune - up for it. Price is negotiable to a point, also willing to due a partial trade / cash, looking for a C-160 with hydraulic lift just to run my rototiller. Trade price will depend upon condition of tractor. Not looking for anything else, just this particular tractor, or just straight up cash deal is fine as well. Thanks for looking

1975 60” Rear Mount Mower

Thu, 01 Jan 1970 00:00:00 +0000

For sale 1975 60” Rear Mount Finish Mower model number 50900. Hard to find made by Woods for Wheel Horse. Fits D series tractors with a cat 0 3 point hitch and rear PTO. Solid in good condition with smooth spindles and no patches. Repainted once. Runs at 2000 rpm at 3600 engine rpm. Located 30 miles North of Pittsbugh.

314-8

Thu, 16 Sep 2021 23:44:38 +0000

1998 470hrs. 42"deck serviced like new

520 w FEL

Wed, 15 Sep 2021 13:54:55 +0000

1994 520 H tractor that I purchased from Duke (Horsefixer) and then I built the loader using the P.F. Engineering plans. Duke went through the tractor and it is excellent mechanically. I also added a foot Hydro control to it. Everything works as it should and it doesn’t use or leak any oil. It has 770 hours on it. The weight bracket goes with the tractor but the weights do not go with the tractor. It is very capable for its size and very stable because I have inside rear wheel weights, fluid in the tires, and 300 pounds of counter weight out back. It is a lot of fun to use and very handy. I’m going to inherit a 4wd SCUT from a family member and I don’t have room for both or l would not be selling my baby.

Very original 855.

Wed, 15 Sep 2021 13:32:22 +0000

I purchased this at a local sale because it was in such unmolested condition. It has a slight fuel leak on the bottom of the tank but they did allow me to put a battery in it and a little bit of fuel so that I could start it and make sure everything operated properly. It started and was smoke-free and purred like a kitten. The fluids all look good. Even the transmission boot, while old, was still intact. I have another boot and I’m throwing it in on the sale. I probably paid too much for it but I’m trying to recoup the $435 I spent on it. The only modification I can really see is that the battery retainer looks to have been replaced and it looks to me like they put a new key switch in it. I’m sure it also has a new seat cover. I’m not an expert though so there may be other things. The front tires are the Wheel Horse tires and they hold air and are in really good condition. The rear tires are Goodyear and look to have been replaced at some point. The mower deck operates as it should and everything is free in the lift and rear hitch mechanism. Send me a message if you would like additional information of any kind.

Like new 2000 314-8 w 42” Deck 300 hours

Wed, 15 Sep 2021 00:15:58 +0000

All original tractor in excellent condition. I did not use this tractor for mowing so it and the deck are very clean. It starts and runs perfectly and does not leak, smoke, or use oil. The original WH seat is in good condition with a minor crack. It has the 8.5” wide 520 wheels on it now. It also has a 2” receiver hitch and newer battery. PM me if you’d like more pictures. The trailer is not part of the sale

Snow blower

Tue, 14 Sep 2021 16:14:36 +0000

42" snow blower $100. Snowblower was removed from a C-195. All new bearings, shaft, chain & sprockets on the drive portion of the blower.

Sold 416-8 8 speed wheel horse, rear discharge mower & snow blower

Mon, 13 Sep 2021 14:20:39 +0000

wheel horse garden tractor mower, rear discharge mowing deck & snow blower both in good condition and runs well. all the parts for the snow blower are with it.

Deck Belt Guards 48"

Mon, 13 Sep 2021 14:14:29 +0000

Removed from a early 90's 48 inch deck. They have been repainted and the paint is a bit dull and one cover has a small ding.

520-H

Sun, 12 Sep 2021 15:32:50 +0000

Nice 520H with 60 inch deck, 44 inch snowblower, winter cab, 42 inch blade although the tractor has the brackets on the back axle the blade doesn't have the extension. Also have the deflector for the mower discharge and a set of tire chains that may fit the tractor. 735 hours. Please text for more pictures

1975 D180

Sat, 11 Sep 2021 15:57:38 +0000

Barn find 1975 D180. 608 original hours. Tractor and 48” belly mower look to be still in their original paint. Rear 60” finish mower looks like it has had one coat of new paint added at some point. Open to trades. Please email me with any questions or for additional photos. 35 miles north of Pittsbugh.

RideAway Senior Tractor - pending

Thu, 01 Jan 1970 00:00:00 +0000

RideAway Senior, fiberglass hood for sale. Was restored around 20yrs ago, and still looks pretty good. Has been kept covered in the garage for most of that time, started occasionally, but hasn't been to a show in 18yrs, so time for someone to enjoy it!

The gellcoat on the fiberglass hood was crazed, so for restoration was repaired by an early Corvette specialist, including a nice paint coat. Tires are decent. Engine runs good, was rebuilt when restored. Sediment bowl gasket and shut-off screw leaks a little, so I leave the tank empty usually.

Pictures are from Labor Day weekend 2021.

Dan

(734) 386-6661

dan@vialard.net

1975 Wheelhorse C-160

Thu, 09 Sep 2021 00:51:53 +0000

1975 Wheelhorse C-160, 16hp Kohler engine, 8-speed stick, 42" mower deck. Engine runs good, no smoke or oil leaks, no repairs needed for 5 years so far, needs new muffler if quieter running wanted. No rust. Currently used to cut lawn. Includes manually swiveled snow blade suspended under tractor, rear tire chains and owner's manual. Original owner.

SNOW/DOZER PLOW & FRAME - SOLD

Mon, 06 Sep 2021 01:37:48 +0000

Complete, except for skids, Wheel Horse plow frame(6 4113) and 54” blade from a 1969 GT14 (1-7441). Call and leave a message, I’ll call you back.

854

Sat, 04 Sep 2021 16:22:02 +0000

2 854s make one complete tractor out of the 2. One engine loose the other stuck.

Have not tried to get either one running

$200/pair

Cash only

Pickup only

GT-14 3 point hitch complete

Thu, 01 Jan 1970 00:00:00 +0000

Here is a complete 3 point hitch for your GT-14

You get everything in the picture.

Cosmetically it may not look the best, but all the joints and threads move freely. A couple of the joints are a little tighter than they should be, but I guarantee if you messed with them a little more they would loosen up to the way they should be. The threads on the adjusters and the top link move like butter.

The price is $300 firm plus actual shipping, shipping will be a little pricey since it's big and heavy but I will take my time and ship it safely and the most cost effective way unless you want different. I would also be willing to drive a few hundred miles from Firth (68358) to meet someone as long as you pay me mileage. My car gets 30 miles a gallon @ $3.00/gallon so you can figure that out.

I will be traveling to Des Moines on Tuesday Sept 7th and could bring it that far for free.

Let me know if you have any questions or need more pics.

Thanks

Tyson

NOS Wheel Horse Hubcaps Set of Four 8" & 12"

Mon, 30 Aug 2021 15:18:26 +0000

A set of four NOS Wheel Horse (2) 8" #11427 and (2) 12" #11428 hubcaps. I DO NOT have the original brown paper. They are repackaged in bubble wrap to prevent rust. You WILL get the original product tags. There is zero rust on these caps. I will also include the rubber mounting strips in the picture. These are handy on the front caps or rear caps to replace two clips on each cap (or all four on fronts) to make them easier to remove without scratching the rims as much. Fronts can be difficult to remove with four clips since they cannot be tapped from the backside. Shipped via USPS large flat rate box at $21.90. Total required via PayPal will be $211.90. PM me if you have questions. These are currently only listed here. If no one is interested in a few weeks they are going to be listed on eBay. Thanks!

D250 fuel pump

Thu, 01 Jan 1970 00:00:00 +0000

I have a brand new fuel pump for a D250 wheel horse, this NOT a NOS pump this is new. $60 plus shipping. This the last one I have.

Complete Electric Lift Assembly

Sun, 29 Aug 2021 02:37:30 +0000

Complete electric lift assembly (not the over the counter dealer add-on accessory) as removed from a 1986 417-8. Assembly has been completely gone thru, cleaned, serviced, professionally refinished, some new hardware. Comes with all the switches, special side cover and brake rod. Assembly functions as it should and works thru the switch. Should be a direct bolt on for 300's, 400's, and 500's with 8 speed transmissions; should also be adaptable to earlier models as well. $250.00 plus actual shipping, continental US only, cash/ check/ money order/ or Paypal (add 4% for Paypal fee). Winter's coming and we all know how heavy those blowers are!

NOS 12"-8" Chrome Hubcaps

Sun, 29 Aug 2021 02:24:29 +0000

Brand new (NOS), never mounted, 12"-8" hubcap set. No dings, No dents, just a couple very fine marks here and there ( just like they had 30 years ago when we were unpacking them then). Very light surface rust on the backside in the seam. $250.00 shipped / continental US only / cash, check, money order, or Paypal (add 4% for Paypal fee).

Deck Parts

Sat, 28 Aug 2021 11:14:21 +0000

The 2 housings with bearings and the 2 pulleys were removed from a 1991 42" RD deck. Center pulley has some rust in the groove but should clean up. The other housings I have had for awhile and don't remember where I got them from.

37" deck with bagger

Wed, 25 Aug 2021 20:13:36 +0000

No longer available

520H hydro

Sun, 22 Aug 2021 23:40:46 +0000

I have a hydro trans out of a 1993 520H with 742 hours showing. I don’t know the history of the tractor only that it ran. I recently sold the Onan and stripped down to what you see now. The trans is free to whomever needs it. If you want it shipped , contact me so we can see what’s available.

Single stage snow blower- SOLD

Thu, 01 Jan 1970 00:00:00 +0000

Selling this for a friend of my neighbor. He says it’s from a GT1642 Work Horse by Wheel Horse. Comes complete with all parts as well as Owners Manual. Looks like they were only made in 1982-83.

6 Inch Hub Caps (2)

Fri, 20 Aug 2021 19:42:08 +0000

One cap is really nice but the other has a couple of dings and is scratched. Also one clip is missing

D250 fender/seat pan

Thu, 19 Aug 2021 01:15:23 +0000

702 Mower Deck

Thu, 01 Jan 1970 00:00:00 +0000

Mower deck for Wheel Horse 702. Some surface rust, but seems very solid. Pick up only.

1970 WH Electro12 for sale

Mon, 16 Aug 2021 19:49:30 +0000

Electro 12, 1970, Mod-1-7255, Battery good, belts good, crack in block just above the dipstick. Engine will run even with crack. Local pickup only

WH Red Head Lot

Thu, 01 Jan 1970 00:00:00 +0000

(4) 12 inch

(8) 8 inch

varying conditions. Fair-good most average work clothes.

WH 42 Sickle Bar Parts working condition

Thu, 01 Jan 1970 00:00:00 +0000

Everything comes as pictured. Working attachment. Listed as parts because some mounting hardware is missing. (As is)

Karl 610-636-6677

sms 425 Ser 311288

WH 42 sickle bar SMS 425

Mon, 16 Aug 2021 00:00:50 +0000

This sickle bar comes with all mounting hardware and it does work. This assembly can be picked up in Coatesville PA chester county near Lancaster county. 610-636-6677

1975 Wheel Horse B-100 Automatic

Sun, 15 Aug 2021 18:21:03 +0000

Model 1 0511
Starts, runs and drives forward and reverse
Appears to be complete except missing front 7416 escutcheon plate (lights not available for B-100 automatic) and 5438 hood ornament,
Firm on price.

1978 Wheel Horse C-81, 8 speed

Sun, 15 Aug 2021 18:17:01 +0000

Model 81-08K801
103916 transmission - 1-1/8" axles, 8 -pinion, heavy duty hubs
Starts, runs and moves in all gears.
Smokes when started.
Has unique rear wheels (no openings)
Appears to be complete except missing 7416 escutcheon plate (lights were not an option for the C-81).
Firm on price

Wheel Horse 2-Stage Snowblower - Near Mint 1996 (SOLD)

Sun, 15 Aug 2021 13:08:31 +0000

Selling my barely used 2-stage blower. I bought this new around 2003 from a WH dealer that had gone out of business as NOS still in the box/pallet. I used it for a couple of seasons before switching to some larger equipment for lawn and driveway maintenance. We typically don't get a ton of snow here in SE PA and it certainly was not used more than 8-10 times before being retired to a corner of my garage (I also used a blade for smaller snows). I now need the space, according to my wife, so this should go to someone that can use it. I'm keeping the tractor in the photos but wanted to show it fully mounted and for you to see that nothing is missing. I'll try and post a video of it running so that you can hear none of the drivetrain makes any unusual noises. If that doesn't work, I can send it privately. The original manual is also included. I've never done anything to it, for better or worse, it is exactly as it came from Toro in 1996. With so few hours, I can't imagine any original condition units exist that are in better condition. It worked really well in some deep snows, as I recall, but could definitely benefit from more HP than my 416 provides. I certainly don't recommend anything less. Finally, it's heavy - bring some friends and a low trailer to pick it up. My son and I can help, but... It's heavy! I know pricing on these are all over the place because they are relatively uncommon. I don't need to sell it, but would like to make the space, so make me an offer - I might say no, but won't be offended. Thanks for looking!

1980 C-175 Twin Automatic

Sat, 14 Aug 2021 16:12:44 +0000

Starts runs and moves in forward and reverse

New battery and fuel pump

Needs one headlight and both front tires replaced

520 h

Fri, 13 Aug 2021 20:59:30 +0000

780hrs 48"deck new tires foot control have rod to make original

Onan P220 Engine

Thu, 12 Aug 2021 19:56:37 +0000

Closed

D160 for sale

Thu, 01 Jan 1970 00:00:00 +0000

I have a D160 with Snoblower both in running condition, the tractor has been partially repainted, it has the Kohler motor

1999 Toro Wheelhorse 265H

Mon, 09 Aug 2021 23:05:35 +0000

958 hrs on tractor. Repowered in 2014 with a Kohler Command 23hp. 52” recycler mower deck with extra blades. NOS tiller with very little use. Wind screen cab with 2 covers- one brand new NOS snow blower used very little. Lots of extra parts and belts. Has new electric pto clutch Might take partial trade $1600

50" Wheel Horse Sickle Bar

Sun, 08 Aug 2021 15:59:54 +0000

I'm selling my 50" Sickle Bar Mower SML-506, 50”. Originally mounted on a 1267. I purchased it to restore and mount on my 1267 hydro. However circumstances changed. I purchased it from amcrules several years ago and the video is of it operational on his tractor. It has not been mounted/used since that time. You have all the necessary parts for it to be operational and I'll include two sets of NOS teeth. I'm also including a new skid plate since the original one was welded. The wobble box is good and the only thing I noted that could be replaced is the oil seal on the gear box that seeps over extended periods. The only way I'd consider shipping is if you make those arrangements and I do not have to crate/skid/box anything. PM me if interested.

Click here amcrules video of it in operation