Jump to content
Jennifer

4hp Kohler k91 issues!

Recommended Posts

Jennifer

Husband wants some advice… lol.  So we did an engine swap today on two suburbans because we could not get the one engine to spark all the time to get it running!  The engine ran last year before parking for the winter sleep…. Points were changed out for new the engine was cleaned to make good contact has new spark plug new coil condenser we even switched out the fly wheel today thinking maybe the magnet was weak…. Advice???   It would where are you out yanking on the recoil five or so times and maybe only get the points to fire twice if you’re lucky..  checked the gap and pull again… same thing over and over!  Thanks in advance!

Share this post


Link to post
Share on other sites
 
formariz

Have you checked timing on them? On K91s and I have quite a few of them, unless they are battery ignition, I change them to the NovaII electronic ignition. It eliminates points and condenser and automatically sets timing. It’s cheap and fast to install making engine always have good spark.

  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites
 
wallfish

Points setting on the K91s can be a pain. Seems some need to be at the exact right spot while others have some tolerance to work with. Start at .016 (or even tighter)pull and check for spark then open them up just a .001 each time until you find the sweet spot.

I've never tried the electronic ignition like Cas but I understand why he would just swap to it

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
 
oliver2-44
10 hours ago, formariz said:

Have you checked timing on them? On K91s and I have quite a few of them, unless they are battery ignition, I change them to the NovaII electronic ignition. It eliminates points and condenser and automatically sets timing. It’s cheap and fast to install making engine always have good spark.

:text-yeahthat:

Share this post


Link to post
Share on other sites
 
Jennifer

NovaII electronic ignition  How does this work?

Share this post


Link to post
Share on other sites
 
formariz
24 minutes ago, Jennifer said:

NovaII electronic ignition  How does this work?

novainst.gifmodule2.jpg

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
 
WHNJ701
36 minutes ago, Jennifer said:

NovaII electronic ignition  How does this work?

I bought 2 of them for Briggs engines, 1 never worked, even tried it on another engine and no luck.  The other nova worked for about month, then stopped.

I hear alot of mixed reviews about them

  • Thanks 1

Share this post


Link to post
Share on other sites
 
Jennifer

Still don’t need a battery right?  Say electronic ignition…..  Where does one order from? 🤷🏻‍♀️

Edited by Jennifer

Share this post


Link to post
Share on other sites
 
oliver2-44

CDCBDA9E-DAF2-4B6C-985D-87BC75B4F41D.jpeg.7093671ba09268e4c64cd3d3c28a4c4e.jpeg
 

I bought these off Amazon. The vendor was “The ROPS Shop”. That vendor is also on Ebay

  • Thanks 1

Share this post


Link to post
Share on other sites
 
formariz
12 hours ago, Jennifer said:

Still don’t need a battery right?  Say electronic ignition…..  Where does one order from? 🤷🏻‍♀️

No battery needed. Unit simply replaces condenser and points.It uses the energy from magneto. Can be bought at Amazon. It’s called the NOVA II electronic ignition. There are cheaper knockoffs out there looking identical . Stick to the original which is the only one that  has the logo cast onto body. 

https://www.amazon.com/ELECTRONIC-TRANSISTORIZED-IGNITION-MODULE-Universal/dp/B01LWUZ2YI/ref=sr_1_14?keywords=nova+II&qid=1650982582&sr=8-14

Getza NOVA II 8786 8786R Electronic TRANSISTORIZED Ignition Module Universal - LawnmowersParts & Accessories

Edited by formariz

Share this post


Link to post
Share on other sites
 
formariz
13 hours ago, WHNJ701 said:

I bought 2 of them for Briggs engines, 1 never worked, even tried it on another engine and no luck.  The other nova worked for about month, then stopped.

I hear alot of mixed reviews about them

I also had some trouble with them, but it was always with the "knockoffs". The real NOVA II has the logo cast onto body and I never had one fail or not work. I currently have six in use for quite sometime. All K91s which reside outside and are prone to point oxidation now have them. It will not work on flywheels with multiple magnets.

 

 

This type is the problem unit

 

Electronic Transistorized Ignition Module Nova

This is the one that is reliable!!!

Getza NOVA II 8786 8786R Electronic TRANSISTORIZED Ignition Module Universal - LawnmowersParts & Accessories

 

  • Like 1
  • Excellent 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Rick3478
      By Rick3478
      For Sale NOS M12S Short Block, still in the original box.  I bought it pre-emptively when Kohler was phasing out the Magnums.  Thought I would have it on hand if one of mine needed it, or maybe I would find a tractor with a busted rod for cheap.  Neither of those things happened, the darn things just keep running.
       
      Part number 77 522 35, probably built in late '05, it's the combination replacement kit Kohler made to fit WheelHorse or Gravely, machined to bolt directly into the Gravely transaxle, but also has spacers to mount WheelHorse PTO clutch/brake.  Also has a bunch of gaskets and seals packed with it, probably all you need to install it.
       
      And it's heavy, so it's not practical for me to ship.  Buyer arrange to pick up near Elida OH, I can lift it about knee high to help load.
       
      Asking $800 or might consider trade for a good center mount grader blade.
       
       


    • mcfarmall
      By mcfarmall
      Tractor features Kohler 16hp cast iron engine, gently used 42" deck, concrete wheel weights, tire chains, new Chinesium carburetor, fuel lines and filter, new air filter, 2 new fwd/rev cams.  A starter,  some new gaskets, and miscellaneous parts.  New drive belt and all the belt idler assemblies.  Engine runs but smokes.  Great restoration candidate or a spare engine for you pullers out there.  Call, text or email for a private showing.   No offers considered unless made in person.  Buyer responsible for transportation.  Many more pictures to send to interested persons. 


    • Vaughan32850
      By Vaughan32850
      Has anyone got a WT-30 tiller they can send pictures if pleas? It’s the one fitted with a K91 engine for RJ models. 
      Many thanks

    • Jeff-C175
    • Jennifer
      By Jennifer
      Well my husband got new grownup toys!  Lol. Just wanted to post them on here to share!  Sure most seen for sale but they arrived yesterday at our back door glad we found them before it rained again!  Not sure why delivery person made the effort to go to the back of the house…. 🤔🤯




×
×
  • Create New...