Jump to content
odee61

416 8 Onan / 312 Hydro with a 12 HP Kohler

Recommended Posts

odee61

Will the PTO work from the 312 Hydro with a 12 hp Kohler onto the 416-8 Onan?  My PTO disc went today. Any help would be most appreciated.

Edited by odee61
wrong model number originally listed

Share this post


Link to post
Share on other sites
 
Achto

Unfortunately I am unable to answer your question, and I don't want to guess. So just let me offer a :WRS:.

 

Someone who knows for sure should be along shortly. 

Edited by Achto
  • Like 1

Share this post


Link to post
Share on other sites
 
pfrederi

What is an 812H Kohler? 

Share this post


Link to post
Share on other sites
 
odee61
2 hours ago, pfrederi said:

What is an 812H Kohler? 

8 i'm not sure, 12 it's a 12hp kohler, H it's hyrdro (transmission and hydraulic lift. I'm new to this. Learning everyday. I love Wheelhorse. Thank you for your response.:wh:

Share this post


Link to post
Share on other sites
 
Handy Don

So maybe a 312-H. Kohler engine?

The 416-8 is an Onan engine. 

 

Really important that you post the model and serial numbers of both of your machines (tags with this info are on the rear fenders near the left side of the seat) so that someone can give you clear answers about parts interchangeability.

 

Share this post


Link to post
Share on other sites
 
squonk

If you're talking about the PTO clutch disc measure the O.D. If it's the same then yes it will fit.

 

Share this post


Link to post
Share on other sites
 
odee61
4 hours ago, pfrederi said:

What is an 812H Kohler? 

Really sorry, it's a 312 Hydro with a Kohler

Share this post


Link to post
Share on other sites
 
pfrederi

They will interchange...

  • Like 1

Share this post


Link to post
Share on other sites
 
odee61
6 hours ago, Handy Don said:

So maybe a 312-H. Kohler engine?

The 416-8 is an Onan engine. 

 

Really important that you post the model and serial numbers of both of your machines (tags with this info are on the rear fenders near the left side of the seat) so that someone can give you clear answers about parts interchangeability.

 

Thank You

Share this post


Link to post
Share on other sites
 
odee61
5 hours ago, pfrederi said:

They will interchange...

Thanks a million. Wish I found this forum a long time ago. Swapped them today, everything seems to be ok. I'll eventually replace both PTO's as I use both machines. Thanks again.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Rob R
      By Rob R
      Afternoon gentlemen friend of mine's father passed after a long illness, and he is now the owner of his Wheel Horse 416-8 with the Onan P216.  He wants to sell it to me as he has other tractors. I never owned and Onan Machine what advice can you give me. It has been in storage for 5 years and of course according to him "ran when parked" Has 365 hours on it. Thanks in advance going to look at it this Wednesday.  
    • Rick3478
      By Rick3478
      For Sale NOS M12S Short Block, still in the original box.  I bought it pre-emptively when Kohler was phasing out the Magnums.  Thought I would have it on hand if one of mine needed it, or maybe I would find a tractor with a busted rod for cheap.  Neither of those things happened, the darn things just keep running.
       
      Part number 77 522 35, probably built in late '05, it's the combination replacement kit Kohler made to fit WheelHorse or Gravely, machined to bolt directly into the Gravely transaxle, but also has spacers to mount WheelHorse PTO clutch/brake.  Also has a bunch of gaskets and seals packed with it, probably all you need to install it.
       
      And it's heavy, so it's not practical for me to ship.  Buyer arrange to pick up near Elida OH, I can lift it about knee high to help load.
       
      Asking $800 or might consider trade for a good center mount grader blade.
       
       


    • mcfarmall
      By mcfarmall
      Tractor features Kohler 16hp cast iron engine, gently used 42" deck, concrete wheel weights, tire chains, new Chinesium carburetor, fuel lines and filter, new air filter, 2 new fwd/rev cams.  A starter,  some new gaskets, and miscellaneous parts.  New drive belt and all the belt idler assemblies.  Engine runs but smokes.  Great restoration candidate or a spare engine for you pullers out there.  Call, text or email for a private showing.   No offers considered unless made in person.  Buyer responsible for transportation.  Many more pictures to send to interested persons. 


    • Jon Paulsen
      By Jon Paulsen
      Inexpensive - Carlisle X Trac ATV Bias Tire - 16x6.50-8 Good quality (I expect) Should look nice with my large rear aggies  
      I don't know how much these have been discounted, but I expect anything you find like this from a good brand will be 2X to 3X the price. $45 each at Amazon. This tire is discontinued. 
       
      Rough measurement seems they are about 16" tall and the lugs are about 1/2" deep. 



    • lsc1257
      By lsc1257
      I have a 1996 520H Wheel Horse for sale.  The tractor has just over 800 hours on it.  It comes with a 48 inch deck.  The deck is a 1995 and has over 1,500 hours on it, as it came brand new with my 312-8 that I sold several years ago.  This 520-H has the swept front axle so it can handle a 60 inch deck.  I just replaced the battery and the deck belt this summer.  The engine is a 20HP Onan and it starts right up but requires the full choke.  The transmission is an Eaton 1100-062, hydrostatic.  The deck is in rough shape but the spindles appear to be in good working order.  The right rear tire has some cracking.  The original operator's manual for the 520H is included, as is the original operating and maintenance instructions for the deck, plus the installation instructions for the deck.  Also included is a new PTO belt and several miscellaneous deck wheels and rollers.  Additional pictures available upon request.  Asking $500.



×
×
  • Create New...