Jump to content
Adamw89

Doesnt move

Recommended Posts

Adamw89

I have a charger 10 hydromatic wheel horse. I had to pull it back in the garage so i turned the nut ontop of the axel under the seat so it rolled freely. I turned the nut back in now it wont move and wheels remain unlocked

20210409_175152_HDR.jpg

Share this post


Link to post
Share on other sites
 
Pullstart

:text-welcomeconfetti:

 

Have you checked the fluid level?  I know it sounds silly, but might be overlooked.  Also, I’ve seen some tow valves work with 90 degrees of movement, but most suggest 180.  The roll pin pointing forward if I recall should be full flow.

Share this post


Link to post
Share on other sites
 
Adamw89

Yeah i checked the fluid level its full

Share this post


Link to post
Share on other sites
 
daveoman1966

Was the tractor runnng and moving correctly BEFORE you pulled it back to the garage?  

This is the push VALVE on top of the Hyd Pump End Cap.  Is this what you turned to allow the tractor to roll freely?

You would only have to turn the ROLLPIN just 90 degrees to allow free-roll.  However, you still need to roll it SLOWLY.

ps...  These are the only pic of the PUSH valve I have...from a pump refurb of a few years agol.

 

 

223 044a.jpg

223 045.JPG

Share this post


Link to post
Share on other sites
 
Adamw89

Yeah thats it what i turned and yes it worked fine before i loosened it and pulled it back to garage

Edited by Adamw89

Share this post


Link to post
Share on other sites
 
Adamw89

Another thing is that valve the top part is missing with the pin. Its just a flat bolt i loosend it with a 1inch socket

Share this post


Link to post
Share on other sites
 
squonk

1 inch socket sounds too big. I think you moved the wrong thing! 

Share this post


Link to post
Share on other sites
 
953 nut
11 hours ago, Adamw89 said:

I had to pull it back in the garage so i turned the nut ontop of the axel under the seat so it rolled freely.

:WRS:

Was the tractor operating properly going forward but wouldn't go in reverse? Here is a manual that should be helpful.

 

Share this post


Link to post
Share on other sites
 
Ed Kennell
7 hours ago, Adamw89 said:

top part is missing with the pin.

Looks like you need a new valve.         Post a picture of your valve.

  • Like 1

Share this post


Link to post
Share on other sites
 
The Tuul Crib

:text-welcomeconfetti:T😎:rs:

:happy-jumpeveryone::happy-jumpeveryone:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...