Jump to content
Sign in to follow this  
Mudrig150

A couple questions

Recommended Posts

Mudrig150

What would be the best electric fuel pump to put on a tractor with a Magnum 18, where the tank is lower than the carb? I don't really want to use the stock fuel pump, mainly to spare my starter.

Edited by Mudrig150

Share this post


Link to post
Share on other sites
 
pfrederi

I have used Facet Powerflo on 3 tractors some for several years now  no issues,.  I use teh 1.5-4 psi 60245 others my prefer lower psi 60304  Made in USA

 

I tried one of the cheapy chicom knock offs it died after only a few hours run time ...a long way from the shop. I know other had better luck with them You pays your money you take your chance....

 

https://www.aircraftspruce.com/catalog/eppages/solidstatepump.php

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
 
Mudrig150
4 minutes ago, pfrederi said:

I have used Facet Powerflo on 3 tractors some for several years now  no issues,.  I use teh 1.5-4 psi 60245 others my prefer lower psi 60304  Made in USA

 

I tried one of the cheapy chicom knock offs it died after only a few hours run time ...a long way from the shop. I know other had better luck with them You pays your money you take your chance....

 

https://www.aircraftspruce.com/catalog/eppages/solidstatepump.php

What size are the fittings?

Share this post


Link to post
Share on other sites
 
pfrederi
27 minutes ago, Mudrig150 said:

What size are the fittings?

Scroll down the page I linked it shows that stuff way down.

Share this post


Link to post
Share on other sites
 
Mudrig150

1/8" NPT, but for 5/16" fuel line.

Share this post


Link to post
Share on other sites
 
pfrederi

The model i use comes with two 1/8 npt with 1/4" barbs.  I use 1/4" fuel line on all the WHs.  (now using the yellow stuff)  You can buy 1/8npt with 5/16 barb fitting if you really want to use 5/16 line

Edited by pfrederi
  • Like 1

Share this post


Link to post
Share on other sites
 
Mudrig150
4 minutes ago, pfrederi said:

The model i use comes with two 1/8 npt with 1/4" barbs.  I use 1/4" fuel line on all the WHs.  (now using the yellow stuff)  You can buy 1/8npt with 5/16 barb fitting if you really want to use 5/16 line

Mine has 1/4" line, too.

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...