"Manic-Mechanic" 1,188 #1 Posted July 10, 2019 I had the wiring on the 1045 just functioning and charging, but not "correct". I found the C.H. ignition and rewired the whole system to this diagram. I included the light circuit and a spare 12v switch. The warning light works as it should. The lighter is fused (15a). 2 Share this post Link to post Share on other sites
953 nut 51,014 #2 Posted July 10, 2019 Here is a diagram I have used for three wire ignition switch and starter/generator. 3 Share this post Link to post Share on other sites
"Manic-Mechanic" 1,188 #3 Posted July 10, 2019 (edited) I believe that is the same circuit, nice. 1964 1045 re-wire, new ignition and switch replacement. Took corrective action on circuit design as well. "Dry-fit", everything works great. Now I'll dismantle and install the grommet and new switch. Oh, and repainted the fuel tank while I was at it. . Edited July 10, 2019 by oldman 1 Share this post Link to post Share on other sites