BMW1 42 #1 Posted July 5, 2019 What are people using as a replacement muffler for K482/K532 D series tractors? Share this post Link to post Share on other sites
pacer 3,159 #2 Posted July 6, 2019 I have begun using a muffler usually shown as for a Cub Cadet. It is reasonably priced, is relatively quiet -- and looks good! --- and with the side inlet it usually eliminates a bend. However .... theres always a "but" ... on the big 482/532 I completely removed the existing exhaust setup and had to fabricate/weld up the pipe from the block to muffler Share this post Link to post Share on other sites
DavidP 9 #3 Posted August 25, 2019 On 7/5/2019 at 9:38 PM, pacer said: I have begun using a muffler usually shown as for a Cub Cadet. It is reasonably priced, is relatively quiet -- and looks good! --- and with the side inlet it usually eliminates a bend. However .... theres always a "but" ... on the big 482/532 I completely removed the existing exhaust setup and had to fabricate/weld up the pipe from the block to muffler Will these fit in the original location on the D200? Do you have the part number? Share this post Link to post Share on other sites