Jump to content
Rob R

Kohler M10 Rebuild

Recommended Posts

Rob R

Hi guys need your help on where some parts go on an M-10s rebuild (out of a 310-8) of course the P.O. took the engine apart let it age for 5 yrs and then asked me to do the rebuild and then put it all back together. Need help with throttle linkage, PTO reconstruction and what the heck is the small pipe thing with a hole in the middle...… Thanks wheelers...… p.s. running great now Hone job, new piston, rings, head gasket and carb rebuild. 

Kohler M10  (1).JPG

Kohler M10  (2).JPG

Kohler M10  (3).JPG

Kohler M10  (4).JPG

Share this post


Link to post
Share on other sites
 
JAinVA

The small pipe is a breather tube which fits to the base of the aircleaner.It vents crankcase gases to the air intake for reburn instead if dumping them to atmosphere

Share this post


Link to post
Share on other sites
 
Rob R
17 minutes ago, JAinVA said:

The small pipe is a breather tube which fits to the base of the aircleaner.It vents crankcase gases to the air intake for reburn instead if dumping them to atmosphere

Might you have a pic of how it looks installed JA?   

Share this post


Link to post
Share on other sites
 
JAinVA

I'll try to get a photo posted but it will later in the afternoon.

Share this post


Link to post
Share on other sites
 
JAinVA

I took these from an M10 I got.Hope it helps.

2019.05.25.2021.JPG

2019.05.25.2022.JPG

2019.05.25.2024.JPG

  • Like 2

Share this post


Link to post
Share on other sites
 
Rob R

Very helpful JA especially the throttle linkage.   Thanks 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Rick3478
      By Rick3478
      For Sale NOS M12S Short Block, still in the original box.  I bought it pre-emptively when Kohler was phasing out the Magnums.  Thought I would have it on hand if one of mine needed it, or maybe I would find a tractor with a busted rod for cheap.  Neither of those things happened, the darn things just keep running.
       
      Part number 77 522 35, probably built in late '05, it's the combination replacement kit Kohler made to fit WheelHorse or Gravely, machined to bolt directly into the Gravely transaxle, but also has spacers to mount WheelHorse PTO clutch/brake.  Also has a bunch of gaskets and seals packed with it, probably all you need to install it.
       
      And it's heavy, so it's not practical for me to ship.  Buyer arrange to pick up near Elida OH, I can lift it about knee high to help load.
       
      Asking $800 or might consider trade for a good center mount grader blade.
       
       


    • mcfarmall
      By mcfarmall
      Tractor features Kohler 16hp cast iron engine, gently used 42" deck, concrete wheel weights, tire chains, new Chinesium carburetor, fuel lines and filter, new air filter, 2 new fwd/rev cams.  A starter,  some new gaskets, and miscellaneous parts.  New drive belt and all the belt idler assemblies.  Engine runs but smokes.  Great restoration candidate or a spare engine for you pullers out there.  Call, text or email for a private showing.   No offers considered unless made in person.  Buyer responsible for transportation.  Many more pictures to send to interested persons. 


    • Jeff-C175
    • Jennifer
      By Jennifer
      Husband wants some advice… lol.  So we did an engine swap today on two suburbans because we could not get the one engine to spark all the time to get it running!  The engine ran last year before parking for the winter sleep…. Points were changed out for new the engine was cleaned to make good contact has new spark plug new coil condenser we even switched out the fly wheel today thinking maybe the magnet was weak…. Advice???   It would where are you out yanking on the recoil five or so times and maybe only get the points to fire twice if you’re lucky..  checked the gap and pull again… same thing over and over!  Thanks in advance!
    • OHLB
      By OHLB
      Newbie here. 310-8 won't start. Battery is dated 10/19. Did crank a couple times but started losing ummph. Should I replace it or attempt to charge it? Can't tell if the battery is frozen. Never knew until today that batteries could freeze and that it's dangerous to charge a frozen battery. It's been single digits with wind chill the last couple weeks here. 
×
×
  • Create New...