Jump to content
Sign in to follow this  
PA.BOB

Snow Plow questions please

Recommended Posts

PA.BOB

Hi everyone.  Which snow plows would fit  a 1967  1057 long frame?  Like from what years would fit it ?   And does it bolt to the  bottom of the rear axle?  With special brackets?  I looked at some of the manuals . But i couldn't really find anything that much.  I also wanted to see how it was mounted.  Does it really mater what size  i should run?    I was thinking about a 42 inch.     Any help would be greatly  appreciated.   Sorry for all these questions.  Thanks.    Bob...... 

Share this post


Link to post
Share on other sites
 
rjg854

This is the place for questions.  Yes you'll need a long frame plow,  an axle bracket to fasten the back of the blade to. A 42" or a 48" will work on your tractor.  I'm sure some one will be along that can give you more specific information. 

Share this post


Link to post
Share on other sites
 
gwest_ca

Dozer DNA of long tractor frame dozer blades

1966-1967 model BD-426 - Fits LONG frame tractors - Mounts ahead of the rear axle - replaced by

1968 model 6-1111 - Fits LONG frame tractors - Mounts ahead of the rear axle

----------------------------------------------------------------------------------------------------------------------

1968 model 6-4111 - First to fit LONG & SHORT frame tractors and first to mount under the rear axle - replaced by

1969 model [6-4112 + 6-9621]

1970-73 model [6-4113 + 6-9622]

1973-74 model [6-4113 + 6-9623]

1974 model [6-4114 + 6-9624]

1974 model 6-2131

1975 model 6-2132

1976 model 6-2133

1976 model 66-42BC01

1977 model 76-42BC01

1978 model 86-42BC01

1979 model 96-42BC01

1980 model 06-42BC01

1981-1984 model 06-42BC02 (Up to here they are 42" wide)

1984-1989 model 06-48BC01 (They are now 48" wide)

1990 model 06-48BC02

1991-1993 model 06-48BC03

1993-2001 model 79350

2002 2004-2009 2012 model 79364

 

Garry

Share this post


Link to post
Share on other sites
 
The Tuul Crib
9 hours ago, rjg854 said:

This is the place for questions.  Yes you'll need a long frame plow,  an axle bracket to fasten the back of the blade to. A 42" or a 48" will work on your tractor.  I'm sure some one will be along that can give you more specific information. 

:text-yeahthat:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...