ClassicTractorProfessor 5,233 #1 Posted May 21, 2019 Going to pick up all the stuff to service my newly acquired 753 in a day or so before I try to start it. I noticed when I was washing it yesterday this tractor has a Champion J8 plug in it, Can anyone verify if that is the correct plug or not? I know the big block Kohlers take an H10 or its equivalent, but this is my first experience with the small Kohler. Also if anyone has the NGK plug number that would be great if not I can cross reference it. Thanks Share this post Link to post Share on other sites
ZXT 2,394 #2 Posted May 21, 2019 (edited) Kohler manual calls for an RJ8C. Looking online at a cross reference chart, it apears that a NGK 3522 should be suitable. Edited May 21, 2019 by ZXT 1 Share this post Link to post Share on other sites
ClassicTractorProfessor 5,233 #3 Posted May 21, 2019 Thank you, didn't have my manual handy and didn't want to drive 15 miles out of my way on the way to pick up stuff tomorrow Share this post Link to post Share on other sites
ET160 29 #4 Posted May 21, 2019 J8s. They went in everything. Share this post Link to post Share on other sites