Jump to content
wheeliepower

no spare parts => build by yourself

Recommended Posts

wheeliepower

Because the shipping of spare parts from usa to Germany is very expensive, I built this part of my handbrake because it did not work

 

Unfortunately I have to paint it black because I do not have red "wheel horse" color

 

After the installation, the function test follows

 

regards

 

manfred

 

brake1.jpg

brake2.jpg

  • Like 7

Share this post


Link to post
Share on other sites
 
oliver2-44

That should work!

  • Like 1

Share this post


Link to post
Share on other sites
 
JoeM

Looks good Manfred.

Something I have done for parts going to Europe. If you know someone traveling to the states and need some small not to heavy parts they can bring them back. I have shipped to an address where that person is and they packed it in their luggage.

Just a thought.

  • Like 1

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:

:text-coolphotos:                           That looks better than the factory part.                         :handgestures-thumbupright:

Share this post


Link to post
Share on other sites
 
wheeliepower

function test successfully completed :thumbs:

  • Like 1

Share this post


Link to post
Share on other sites
 
wheeliepower

progress

I have now installed a hour meter. I think it's important to have if I use a motor without oil filter.

 

stundenzähler.jpg

Edited by wheeliepower
  • Like 2

Share this post


Link to post
Share on other sites
 
wheeliepower

then i have worried an accident trailer. he has cost $ 35. I had to install a new access pipe.

Then I built a box of wood for transporting tools and still mounted a support wheel and magnetic tail lights.

wheeliegespann.jpg

  • Like 5

Share this post


Link to post
Share on other sites
 
wheeliepower

next i install a working ammeter. but it still takes parts come from usa.

I still need a picture of the lawnmower deck from below (where you can see the blades). There I have to fix the sheets between the knives.

 

who can do a picture, I would be very grateful

Share this post


Link to post
Share on other sites
 
wheeliepower

one more part I had to make myself, the grip of the lever of the belt pretension of the drive belt.

 

Unfortunately, the import from the US is very expensive, so my low budget version :rolleyes:

 

 

P1020773.JPG

  • Like 4

Share this post


Link to post
Share on other sites
 
wheeliepower

"transformation" bolt

 

this is a bolt for attaching the snow blade to my homemade snowplowUnfortunately with the curvature it was too short.

 

Since I did not have the possibility of heating I cut through the bolt and welded everything together again :rolleyes:

 

Then I welded another stop at the top of the bolt.

 

Now I am already waiting two weeks for my delivery iron profiles. Then  I can start to build the frame for the snowplow.

 

 

bolzen1.jpg

 

 

bolzen2.jpg

Edited by wheeliepower

Share this post


Link to post
Share on other sites
 
wheeliepower

The steel delivery for the self-made snowplow has just been delivered   :)

 

As a basis I build the snow plow like someone has built this myself on youtube.

 

stahl.jpg

Edited by wheeliepower
  • Like 1

Share this post


Link to post
Share on other sites
 
wheeliepower

attitude in another rubric

 

 

 

Edited by wheeliepower
attitude in another rubric

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...