Jump to content
TravelinJavelin

front tach o matic system on a 953/1054?

Recommended Posts

TravelinJavelin

was wondering if anyone or knows anyone that has put a attach matic on the front there machine doing a trade this weekend and just currious if its possible or not a good idea on these?

 

Share this post


Link to post
Share on other sites
 
19richie66

I put an attachamatic on my gt14 as Aldon also did. On the gt14 you would have to weld a thicker front plate. I believe the 953/1054 has a thick plate but the axle pin runs though it. I really dont see any problems other than possibility of the tire on the right hitting the pulley if you run a mule drive.

Share this post


Link to post
Share on other sites
 
TravelinJavelin

well i do have set up where someone made a front mount that bolts in to the front not the sides and it sort of front tach but you just run your long pin through it just sticks out maybe 6" longer then normal wonder if the lift will bring it up all right?

 

Share this post


Link to post
Share on other sites
 
19richie66

Any pics? Just trying to understand what tou have there.

Share this post


Link to post
Share on other sites
 
"D"- Man

I purchased a used 1054 with a Wheel Horse attachment bracket thingy on the front but not sure if this is what you are referring to.  Excuse the poor picture due to lighting conditions and it is sort of tucked away in my garage.

IMG_20181206_224354767.jpg

  • Like 2

Share this post


Link to post
Share on other sites
 
TravelinJavelin

yup that is it huh looks like its bolted on from underneath?       thanks for the pic on this .......if its not alot of trouble i'd be currious how that is mounted and wondering if that came off from D series tractor?

Share this post


Link to post
Share on other sites
 
19richie66

Here is mine. 3 bolts through the front plate. My 953 and the 1054 will get them too. You can weld chain links to a piece of 5/8” rod and use it as a front tie down point also.

78EA7719-6784-4753-B8D1-4181CF78052B.jpeg

Edited by 19richie66
  • Like 3
  • Excellent 4

Share this post


Link to post
Share on other sites
 
oliver2-44
2 hours ago, 19richie66 said:

 You can weld chain links to a piece of 5/8” rod and use it as a front tie down point also.

 

 

@19richie66 Thats a great idea, thanks for sharing it. The fronts are always hard to tie down without the straps or chain scuffing some paint up.

  • Thanks 1

Share this post


Link to post
Share on other sites
 
TravelinJavelin

hey Richard is the tach matic from a D series or C series tractor? or how about where can i get one? i have something simalar but its 2 bolt to the front plate on mine or is this like a gt -14 special?

Share this post


Link to post
Share on other sites
 
ebinmaine
27 minutes ago, TravelinJavelin said:

hey Richard is the tach matic from a D series or C series tractor? or how about where can i get one? i have something simalar but its 2 bolt to the front plate on mine or is this like a gt -14 special?

B and C had them... Not sure about D.

I may have one o' them around here.

 

Do you have any pics of what you want?

 

Share this post


Link to post
Share on other sites
 
TravelinJavelin

a front bolt on?

 

Share this post


Link to post
Share on other sites
 
19richie66

Someone had put this on mine before I got it. There were three holes in the plate and bracket. I can’t say whether it was like that or if someone drilled it. I just removed it, welded the plate back on right and reinstalled it. I’ll try to get a better picture tomorrow.

Edited by 19richie66

Share this post


Link to post
Share on other sites
 
TravelinJavelin

i got one on my charger 9 now but it bolts to the side of the frame and the bolt holes don't line up on my 953

  • Like 1

Share this post


Link to post
Share on other sites
 
TravelinJavelin
44 minutes ago, ebinmaine said:

B and C had them... Not sure about D.

I may have one o' them around here.

 

Do you have any pics of what you want?

 

just like whats shown in the pic eric if you got one i'll take it

Share this post


Link to post
Share on other sites
 
ebinmaine
41 minutes ago, TravelinJavelin said:

i got one on my charger 9 now but it bolts to the side of the frame and the bolt holes don't line up on my 953

Have any pics of that?

I know someone looking for one for an electro 12

 

 

 

33 minutes ago, TravelinJavelin said:

just like whats shown in the pic eric if you got one i'll take it

I have a C81 Parts Tractor out there that should have what you need.

 

Share this post


Link to post
Share on other sites
 
TravelinJavelin

if it bolts from the front and not the sides.......my charger 9 bolts on the sides of the frame rails

 

Share this post


Link to post
Share on other sites
 
ebinmaine

If the one on your charger could be for sale I know someone who might be interested.

 

Share this post


Link to post
Share on other sites
 
TravelinJavelin

well i think i have it sold for sunday ......we'll see

  • Like 1

Share this post


Link to post
Share on other sites
 
19richie66

This is what is on mine. The bottom one is off of a 418-A. I use the axle pivot pin hole for a tie down point.

image.jpg

F0FDF715-9512-4811-B3EB-852248979081.jpeg

Edited by 19richie66
  • Like 3

Share this post


Link to post
Share on other sites
 
TravelinJavelin

ordered off ebay just like it this one

morning

Share this post


Link to post
Share on other sites
 
19richie66

I just took this off a frame I stripped out. I would have given it to you. Dang🙈

Edited by 19richie66
  • Like 1

Share this post


Link to post
Share on other sites
 
TravelinJavelin

well i appreciate that and thank you anyways Rich

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...