Jump to content
weeevr

transmission

Recommended Posts

weeevr

need to know if a trans from a 79 c111 8 speed is the same as one from a 80-84 c125 (8 speed)

or  are they close enough to use, thanks in advance

Share this post


Link to post
Share on other sites
 
gwest_ca

Welcome to the forum.

 

Both used the 103916 model of transmission. Click on the picture.

Garry

  • Like 4

Share this post


Link to post
Share on other sites
 
weeevr

thanks a lot, figured as much but needed to be sure before a 6 hour drive to get it

 

  • Like 1

Share this post


Link to post
Share on other sites
 
Achto

:WRS:  Good luck on your project.

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:

Hope you will share your project on here as you go along.      :wwp:              Always better to ask the question before taking a chance.

  • Like 1

Share this post


Link to post
Share on other sites
 
Pullstart

Welcome @weeevr!

Share this post


Link to post
Share on other sites
 
oliver2-44

:text-welcomeconfetti:

Share this post


Link to post
Share on other sites
 
stevasaurus

What's wrong with the one you have???  They are fixable most of the time.  :text-welcomeconfetti:

Share this post


Link to post
Share on other sites
 
KC9KAS

@weeevr :text-welcomeconfetti: to :rs:

Share this post


Link to post
Share on other sites
 
The Tuul Crib

:woohoo::text-welcomeconfetti::wh:

Share this post


Link to post
Share on other sites
 
TravelinJavelin

you will be getting some of the best support of anywhere with these guys here ..........you have a question about a wheel horse these guys here at redsquare can answer it

  • Like 1

Share this post


Link to post
Share on other sites
 
weeevr

Sorry, been busy

thanks for the reception

C111, 79, bought at a yard sale 'bout 10 yrs ago, cheap

2 decks, snow plow, wheel weights & chains

saw last week the r. side axle stickin' out about 2-21/2". jacked it up and had that much in & out play in it.use it in the fall to tow a big leaf vac.

leaf season is NOW so need it pronto. so the "take it apart & fix it" thing is off the table.

drove to ohio today & picked one up I bought on ebay so as all that needs to happen next is to swap it out & go

this is gonna happen tomorrow. 

thanks again for all the info, i'll keepya posted

 

 

  • Thanks 1

Share this post


Link to post
Share on other sites
 
stevasaurus

Sounds like a "C" clip, that holds onto the axle, came off or broke.  It will not take much to fix that after you get the leaves picked up.

2013_0718transmission50600008.JPG

 

Share this post


Link to post
Share on other sites
 
weeevr

Got it all up & runnin' today, pretty easy swap.

saw axles with the snap ring & some with roll pins, didn't know what was in there.

axle moves horizontally a coupla inches but doesn't come out so didn't make sense that a retainer that's 1/8" thick could be the issue.

somewhere down the road if & when I find the ambition, I guess i'll see. thanks fot the pic

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...