Jump to content
Tayloc31

C145

Recommended Posts

Tayloc31

I just bought a c145.  Runs great but its missing the belts that go from the engine to the front pulley, and from the front pulley to the mower deck.  Does anyone know what lengths these are?  The model ID tag is worn off.  Its hydrostatic, 14hp, hydro lift.  

Share this post


Link to post
Share on other sites
 
daveoman1966

If a 42" REAR discharge deck, the belt is # 108834.  If it is 42 or 48 SIDE disch, the belt is # 102742 or 94-2501 (new # ).  You should buy the OEM belt as aftermarket belts...IMHO....are inferior and make less than optimum geometric fit.

 

  • Like 2

Share this post


Link to post
Share on other sites
 
953 nut

:WRS:

The C-145 is a great machine  and with proper maintenance will give you years of service.           :wwp:

Share this post


Link to post
Share on other sites
 
Pullstart

Welcome @Tayloc31!  Like Richard said, :wwp:

Share this post


Link to post
Share on other sites
 
Tayloc31

Thanks guys for the info....i got a great deal on it.  Hoping to find a plow for it soon.

Edited by Tayloc31
  • Thanks 1

Share this post


Link to post
Share on other sites
 
Tayloc31

@daveoman1966

 

There is two belts right? One from motor to pulley and one from pulley to mower deck.  Are they both the same belt?  Its is a 42in rear discharge. 

Share this post


Link to post
Share on other sites
 
daveoman1966

You need belt # 108834.  One...only One.  It runs from the engine PTO, out around the front axle, back under to the pulley, then loops back around the front axle, and to the PTO pulley again.  It is item # 41 in this schematic ...

42 rd mule belt.JPG

Share this post


Link to post
Share on other sites
 
Tayloc31

Awesome thanks  a lot. 

 

Here are a few pics. I paid 180 for it. 

20181017_075218.jpg

20181017_075212.jpg

20181017_075202.jpg

20181017_075208.jpg

  • Excellent 1

Share this post


Link to post
Share on other sites
 
oldblue1993

180 is a good price, the c145 is a great machine. I use mine for rototiller and heavy work, she handles it all in stride. Maintain her and in 40yrs see what that 180 got you.

  • Like 1

Share this post


Link to post
Share on other sites
 
Tayloc31

Im hoping to resore it to its original beauty.

 

I think i i should replace the drive belt as well, do you guys know what belt that is?

Share this post


Link to post
Share on other sites
 
gwest_ca

The belts have been added to this page. Click on the picture.

Not necessarily the deck model you have but the belts will be the same.

Your model of tractor was produced 1980-1984.

 

Garry

Share this post


Link to post
Share on other sites
 
Tayloc31

Thank you.  I have the mower deck drive belt # already.  Im just curious of the belt that runs from the engine to the rear end to make the tractor move. 

Share this post


Link to post
Share on other sites
 
gwest_ca

Tractor drive belt - click on picture

Looks like the Sundstrand and Eaton hydros use different belts. Sundstrand have the filter on the right side and the Eaton on the rear.

 

Garry

 

  • Like 1

Share this post


Link to post
Share on other sites
 
c-series don

Easy way to remember which is which: as far as the filters go Eaton is on the end and Sunstrand is on the side of the transmission. 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...