Phil Burley 4 #1 Posted September 26, 2018 Hello Does any one know a supplier of Valves for a 10 HP Kohler here in UK , The valves are different to the one I have seen here .having that narrow grove for the collet . Regards Phil Burley Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,488 #2 Posted September 26, 2018 This Stens dealer in Canada will ship to Europe Intake https://www.bantasaw.com/catalog/viewproduct.asp?i=1398&p=1615 Exhaust https://www.bantasaw.com/catalog/viewproduct.asp?i=1397&p=1633 - More expensive https://www.bantasaw.com/catalog/viewproduct.asp?i=1397&p=1632 Garry Share this post Link to post Share on other sites
Phil Burley 4 #3 Posted September 27, 2018 thanks , but I don't seem to be able to open those contacts , wil try again Share this post Link to post Share on other sites
Anglo Traction 759 #4 Posted September 27, 2018 Hello Phil, Finding a supplier in UK is possible, but you may find that they only supply Kohler parts. I replaced my Valves 9 years ago on my 72 Raider 12 using genuine Kohlers, it cost me UKL75.00 then !!. 7 years ago I rebuilt another 12hp using parts from a guy in U.S via ebay. Kevin is his name and has good reputation. Sells under the name of bakt4kids Here is a link - VALVES . If you're replacing valves, always check (as I'm sure you have) the Valve Guides are in spec. Mine were ok. Hope this helps and let us know how you get on, as it wiil help others. Regards Share this post Link to post Share on other sites
Phil Burley 4 #5 Posted September 29, 2018 thanks Richard , I am going to take them to a supplier in Telford to see if they have anything to match , but if not I will have to try the US route , but I am beginning to wonder if I am chucking good money after bad , Regards Phil Share this post Link to post Share on other sites