Jump to content
Bill Sherman

Using oil or transmission fluid in hydrostatic transmission.

Recommended Posts

Bill Sherman

I have a 1979 C-161 automatic that still has 10w30 oil in it.  What are the pros and cons of converting it to transmission fluid?  My school of thought is if it's been working fine with oil in it then why change it?  Also, it was designed to run on 10w30 so would converting it cause problems?  I just wanted to hear what people who know more about Wheel Horses have to say about the subject.  Any input is greatly appreciated.

C-161.JPG

Share this post


Link to post
Share on other sites
 
squonk

Leave it at 10/30. If you want to change it use Mobil 1

  • Like 5

Share this post


Link to post
Share on other sites
 
wallfish

If it ain't broke, don't fix it

  • Like 8

Share this post


Link to post
Share on other sites
 
rjg854

I hear that if you have oil in your transmission, it should remain oil. Doing otherwise would cause problems, the 2 don't mix well. 

  • Like 2

Share this post


Link to post
Share on other sites
 
oldlineman

:text-yeahthat:

  • Like 1

Share this post


Link to post
Share on other sites
 
Cvans

South Carolina doesn't get that cold so why would you want to change. I run ATF in some off my GT's (not Wheel Horse) but it gets well below zero here. 

21 hours ago, wallfish said:

If it ain't broke, don't fix it

:text-yeahthat:

Share this post


Link to post
Share on other sites
 
WHX??

Another vote for 10/30 here as pretty sure that what the book says. Make sure the cooling fins are clean & fan is on it.

  • Like 2

Share this post


Link to post
Share on other sites
 
Bill Sherman

It’s not that I want to change it.  I had just heard some people have done it and I was curious as to why and if it was better than using oil.  

Share this post


Link to post
Share on other sites
 
953 nut
23 hours ago, Bill Sherman said:

it was designed to run on 10w30

It was designed to operate properly with 10 W 30 and has done so for four decades;   Don't Mess With Success!

Share this post


Link to post
Share on other sites
 
WHX??

Can't explain why some guys would want to switch. but some hydros, namely Sunstrands did specify to use ATF.  It would only be more beneficial if the OEM called out for it or a service bulletin was issued to switch it.  

  • Like 1

Share this post


Link to post
Share on other sites
 
cleat

My Ford LGT165 used ATF and it also had an Eaton 1100 hydro.

 

It moaned and groaned a lot where all of my Wheel Horses are virtually silent.

 

Other than the possible slight delay with the lift, I think the 10W30 is the way to go.

 

Share this post


Link to post
Share on other sites
 
Bill Sherman

I’m just going to put Moble 1 synthetic 10w30 oil in it when I change it.  

  • Like 1
  • Excellent 1
  • Thanks 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...