bluelinehiway 8 #1 Posted February 2, 2018 Just picked up a 48" Snow plow for my 2000 522xi. Cleaning it up to mount this weekend. The plow looks almost identical to the one on my 310-8 (A-frame; plow;) but there are no plow shoes on the bottom of the plow. On my 310-8 the shoes are simple bent iron with a single bolt running through the mold board. Can anyone provide a pic on what part # 92-6840 "Blade Skid" looks like? There are a couple holes on either side that look like a skid slips into these factory holes but a pic (should I have to fabricate a new set of skids) would really help. Thanks in advance. Tom Share this post Link to post Share on other sites
WVHillbilly520H 10,369 #2 Posted February 2, 2018 (edited) The black ones in 1st pic are the factory skids, the unpainted are a set I made myself, the second pic is the ones I made mounted up, and 3rd here's the blueprint, Jeff. Edited February 2, 2018 by WVHillbilly520H 1 2 Share this post Link to post Share on other sites
bluelinehiway 8 #3 Posted February 2, 2018 Hey WV Hillbilly! Excellent! Thanks for the pics and specs! Very much appreciated! Tom 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,369 #4 Posted February 2, 2018 1 hour ago, bluelinehiway said: Hey WV Hillbilly! Excellent! Thanks for the pics and specs! Very much appreciated! Tom I'm sure 1/4"x4" flat HRS would work, just take longer to make all the bends, Jeff. Share this post Link to post Share on other sites