henryhpsd 124 #1 Posted January 28, 2018 Hi guys, while restoring my 520H i needed to bring the "old paper and paper boxes" to the street for collection. What better way to do that than with the 316-8 .....while driving i thought i heard the engine didnt sound that well. It was almost like the "choke" was still on. At a certain point....the engine... it just stopped. Now i noticed the voltage meter was "jumping" up and down. (like a loose connection) While seeing that i figured...hm..maybe the engine didnt run that well and i was right....and some "sparkes" were missed due to an electrical issue. Plan is to just run down everything for loose connections, but maybe u guys say ....owh thats a well known problem.... its the .....(ur answer) In that case, please do say so, thanks you in advance.. I needed it up and running before my wife tells me : why do u buy another one...make sure u have one that runs in first place 1 Share this post Link to post Share on other sites
C-101plowerpower 1,605 #2 Posted January 28, 2018 7 minutes ago, henryhpsd said: why do u buy another one...make sure u have one that runs in first place hmm, that sounds waaaay to familiar 2 Share this post Link to post Share on other sites
Racinbob 10,277 #3 Posted January 28, 2018 I can't just say go to this or that but you're on the right track by checking all the connections. I would suggest that, even if it seems tight, that you disconnect it and do some cleaning. Once you know all the connections are good see what happens. 1 Share this post Link to post Share on other sites
henryhpsd 124 #4 Posted January 28, 2018 @Racinbob thanks for the confirmation ! @C-101plowerpower Thanks for the confirmation on the other part lol..., there was a c111 on Marktplaats yesterday 425 seemed in good condition had a kawasaki engine on it...didnt run but was all the way in Limburg, i just told the wife i had issues with my 316-8 when i saw the add...bad timing lol... Just got back home...going to have a look at the 316 now. Enjoy the Sunday ! 1 Share this post Link to post Share on other sites
henryhpsd 124 #5 Posted January 28, 2018 ....one of the bolts holding a couple wires wasn't as tight as it should be... Up and running !.... Thanks again ! 3 Share this post Link to post Share on other sites