sqrlgtr 236 #6851 Posted October 3, 2020 (edited) 15 hours ago, dmoore said: Where might I find a set of those rear wheels/tires.?..I'm currently have turf's installed but would love a set like you have there for impending snow! 1978 C-101 8 SPEED I found the wheels and tires on an old craftsman mower that was in someones front yard for sale.The tires are old carilisle super lug and they are hard as a rock,make good pullers.The wheels are 8” wide and have a different offset then the wheel horse wheels and tuck under the fenders nicely “I think anyhow”. I agree with eb turfs with chains are hard to beat in the snow. Edited October 3, 2020 by sqrlgtr 5 1 Share this post Link to post Share on other sites
ebinmaine 62,975 #6852 Posted October 3, 2020 I spent some time working on the Charger hydro project. Trina and her mom were in the yard processing Firewood amongst a ton of other things. Finished up dismantling the plant supports from the garden boxes and stacked 3 trailer loads of wood after moving it from the backyard to the front yard. The pics below are what they did this afternoon. Trina got out her little electric chainsaw. They cut up 4 loads then moved it to the splitter. Stacked it. Split it all up. I spent bout 2 hours putting brush through the chipper. Part of clearing the back yard. I'll post pics of that project later. 5 6 Share this post Link to post Share on other sites
echris 1,425 #6853 Posted October 3, 2020 Ooooh shiny hydro parts. That's not a log splitter, that's a log killer! That thing looks like a beast! 1 Share this post Link to post Share on other sites
dmoore 687 #6854 Posted October 4, 2020 14 hours ago, ebinmaine said: General consensus seems to be that snow tires want chains and WEIGHTS. Note the caps on the word. Traction is about grabbing and you can't push down into the ground without enough weight. I've used all combinations of turfs, ags, chains and no chains. The best traction I've had is with turfs and chains. The AG tires tend to let the chains fall into the wide tread thereby decreasing usefulness of the chain. Lots of weight. ALOT. If you have an asphalt driveway you can use rubber chains with great effect. Eric I think you are right about the chains on turf tires. We had enough snow to plow about 3 years ago here in Va about 15". I chained up and was able to get it done (gravel drive) but not in the most efficient way (lot of slipping) I need weights! Working on that...Thank you much! 2 1 Share this post Link to post Share on other sites
Jhook 849 #6855 Posted October 4, 2020 Still working on the cab. Sewing is definitely not something i enjoy doing yet, work has been busy so i havent even finished sewing one window on yet. Slowly but surely itll be done before snow falls 4 1 Share this post Link to post Share on other sites
ebinmaine 62,975 #6856 Posted October 4, 2020 10 hours ago, echris said: Ooooh shiny hydro parts. That's not a log splitter, that's a log killer! That thing looks like a beast! You isn't kiddin'. She's a rugged buggah for sure. We have a forest of about 70% beechwood. Burns great. BTU about equal to hard maples. Can be tough to handle because it's very twisty and has plenty of knots. But it also grows fast so there's plenty forever. We've put pieces of beechwood through the splitter that were 22" + diameter. Hit the governor and just kept pushing... Here's a thread from not long after Trina bought it. These pics show the shed overhang before it was a chicken 🐔 house (coop and run). Also shows Patriot Horse before it was painted. 2 Share this post Link to post Share on other sites
ebinmaine 62,975 #6857 Posted October 4, 2020 10 hours ago, dmoore said: weights! Working on that IMHO and experience fluid filling is the way to go. See if you can find a Rimguard dealer. Made of sugar instead of salt so no metal rot. Weighs about 10.5 to 11 lbs per gallon. Much heavier than antifreeze or washer fluid. 1 Share this post Link to post Share on other sites
johnnymag3 2,437 #6858 Posted October 4, 2020 (edited) Im taking the Horses for a stroll.......... Edited October 4, 2020 by johnnymag3 1 1 16 Share this post Link to post Share on other sites
Lane Ranger 10,472 #6859 Posted October 4, 2020 (edited) Picked up some new to me items yesterday. A new old stock. Toro classic hood in box, a Spyker spreader with stainless steel bin and an RJ PP-8 garden plow. the first two items came from an online auction in Lebanon, Indiana ( 6 new old stock hoods sold at last minute) and the RJ. Garden plow came from Larry Greener in Morgantown, Indiana. Edited October 4, 2020 by Lane Ranger 4 8 Share this post Link to post Share on other sites
Tractorhead 8,577 #6860 Posted October 4, 2020 Not much just cleanout both Mowerdecks from the last sessions. After that Action i continouse to bring the Workshop more and more together on one Place. begin to establish the Workzones, implement shelves and cabinets. Prepare all for the comeing Winterseson. 2 5 Share this post Link to post Share on other sites
Andy N. 1,891 #6861 Posted October 4, 2020 (edited) Added chains and wheel weights to the 418-A so I could use the cultivator to dig up my sweet potatoes. Probably should have dug them up sooner. Edited October 4, 2020 by Andy N. 7 6 Share this post Link to post Share on other sites
ebinmaine 62,975 #6862 Posted October 4, 2020 @Andy N. That's quite a haul. 2 1 Share this post Link to post Share on other sites
WHX?? 46,703 #6863 Posted October 4, 2020 (edited) Put a Jim Kemp @jimkempstack on the 1067. Old one went tink tink but just a tad obnoxious. Edited October 5, 2020 by WHX24 9 5 1 Share this post Link to post Share on other sites
rjg854 10,711 #6864 Posted October 4, 2020 Tore the 854 apart, and put a rebuilt transmission on and working on tightening up the steering because of some slop in the wheel. Gotta make a run to town tomorrow for larger roll pins. I just happened to have a bushing that will work for where the steering wheel shaft goes through the gas tank. 4 Share this post Link to post Share on other sites
WHX?? 46,703 #6865 Posted October 4, 2020 And we know you did this @rjg854 cause you have all these ?!?!? 5 Share this post Link to post Share on other sites
rjg854 10,711 #6866 Posted October 4, 2020 You want a picture of a pile of parts 1 3 Share this post Link to post Share on other sites
rjg854 10,711 #6867 Posted October 5, 2020 Do you believe me now @WHX24 5 6 1 Share this post Link to post Share on other sites
AMC RULES 36,941 #6868 Posted October 5, 2020 Man, does that look familiar! 1 2 Share this post Link to post Share on other sites
WHX?? 46,703 #6869 Posted October 5, 2020 (edited) Yup... Now we are talkin Randy! Ain't nothin like a work in progress! Madge knows! Nice HL's and stack... now you know why we like our pics! Edited October 5, 2020 by WHX24 2 Share this post Link to post Share on other sites
AMC RULES 36,941 #6870 Posted October 5, 2020 Brings back old memories, long ago and far away now! Share this post Link to post Share on other sites
AMC RULES 36,941 #6871 Posted October 5, 2020 Moved on to the next now! 4 6 2 Share this post Link to post Share on other sites
whtractors24 2,898 #6872 Posted October 5, 2020 Work them hard ! 3 6 1 Share this post Link to post Share on other sites
Pullstart 59,570 #6873 Posted October 5, 2020 Dismounted a couple old tires. They’re more than just flat on the bottom! 6 Share this post Link to post Share on other sites
Pullstart 59,570 #6874 Posted October 5, 2020 Cleaning up some wheels. That’s good enough for the girls Uncle Jim goes out with! 4 Share this post Link to post Share on other sites
Pullstart 59,570 #6875 Posted October 5, 2020 And a little paint. 8 1 Share this post Link to post Share on other sites
