19richie66 16,884 #1926 Posted February 27, 2019 That was a deal. Share this post Link to post Share on other sites
peter lena 8,039 #1927 Posted February 27, 2019 702 Timmy, you did very well on that, I agree that it was a long haul to get it , but that's what you do to get what you want. hope you do a baseline service on it to verify its status, refer to this site for answers' have been using, RUSTOLEUM 2X ULTRA COVER , GLOSS BLACK # 327870 PAINT TO REDO /TOUCH UP DASH AREA AND ENGINE COVERS , PERFECT MATCH. IF YOU DECIDE TO CLEAN UP THOSE AREAS. enjoy that , let us know how its going , pete Share this post Link to post Share on other sites
702 timmy 25 #1928 Posted February 27, 2019 20 hours ago, Vinylguy said: Awesome Horse!! Would you mind posting the hxw of your series 2 kohler air cleaner decal? I had not seen that one before. do you need a better picture and dimensions Share this post Link to post Share on other sites
Super-C 4 me 612 #1929 Posted March 1, 2019 Hello All Snow is on the way again. Had a chance today to get the C81 ready with weights and a plow. She will be going back home to my uncles, so that I won’t have to shovel or use a walk behind snow blower anymore. MORE SEAT TIME 😁😁😁 I’m going to have to get some chains on her sooner than later though. I’m hoping she plows as well as she runs a tiller. 1 6 Share this post Link to post Share on other sites
ebinmaine 62,989 #1930 Posted March 1, 2019 19 minutes ago, bmiller0457 said: get some chains .....and fluid fill the tires and you'll be quite happy. 2 Share this post Link to post Share on other sites
Super-C 4 me 612 #1931 Posted March 2, 2019 I’m also getting a FEL sub frame built for my D250. This guy really does good work. I borrowed a friends sub frame for him to copy. Now I will be able use the FEL on my D160 or my D250 1 3 Share this post Link to post Share on other sites
Super-C 4 me 612 #1932 Posted March 2, 2019 2 hours ago, ebinmaine said: .....and fluid fill the tires and you'll be quite happy. How many gallons fit in a tire? Share this post Link to post Share on other sites
ebinmaine 62,989 #1933 Posted March 2, 2019 28 minutes ago, bmiller0457 said: How many gallons fit in a tire? Depends on the size. There are charts online. My 23 x 10.50 x 12s have 7 gallons each. My oversized fronts are 20 x 8 x 8. They have 5 gallons each. 24 gallons of Rimguard at around 10.5 pounds per gallon...alot of extra traction!!! 1 1 Share this post Link to post Share on other sites
BPEisenhower 502 #1934 Posted March 2, 2019 (edited) Hello there all Horse enthusiast's!! Long time no visit or post but, even though I still have one to finish.....my fiancee surprised me with a little surprise... Can't believe she got me this for my early birthday present. I'm at a loss for words and know nothing about it but it looks like a lot of fun 🎉😆🎊. Edited March 2, 2019 by BPEisenhower 5 6 Share this post Link to post Share on other sites
953 nut 51,559 #1935 Posted March 2, 2019 9 hours ago, bmiller0457 said: How many gallons fit in a tire? SIZE GALLONS Per Tire WEIGHT in POUNDS 16x6.50-8 2.0 21.4 18x7.00-8 3.0 32.1 18x8.50-8 3.4 36.4 18x9.50-8 4.0 42.8 23x8.50-12 5.5 58.9 23x10.50-12 6.8 72.8 6-12 3.6 38.5 2 1 Share this post Link to post Share on other sites
WHX?? 46,710 #1936 Posted March 2, 2019 13 hours ago, bmiller0457 said: I’m also getting a FEL sub frame built for my D250. This guy really does good work. I borrowed a friends sub frame for him to copy. Now I will be able use the FEL on my D160 or my D250 Same guy that made my lift rod Brian?? If so yah, nice work. Fits like it was made for it! 1 1 Share this post Link to post Share on other sites
Super-C 4 me 612 #1937 Posted March 2, 2019 20 minutes ago, WHX22 said: Same guy that made my lift rod Brian?? If so yah, nice work. Fits like it was made for it! Yes is that all coming together now? will you have it on a tractor before winter is over? I’ll be dropping off a 520 plow extension for him to duplicate when I go to pick this up. Decent prices to Share this post Link to post Share on other sites
bds1984 1,382 #1938 Posted March 3, 2019 Today I finally got around to finishing up my generator mount for the 7200 watt generator head I got from HF years ago. With the pulley and belt I had on hand, the tractor runs at 2500 RPM to spin the generator up to the speed to achieve 125-ish volts. I ran 25 amps of load off of it and noticed a slight dip in engine speed and voltage drop to 120. I know that I'll need to get a larger pulley on the generator and a slightly longer belt to accommodate that so I can increase the engine speed a bit, but I am pleased with the results. 11 5 Share this post Link to post Share on other sites
TyH 13 #1939 Posted March 3, 2019 My 800 special ,Replaced the throttle control plate with an original, mowed the yard 7 2 1 Share this post Link to post Share on other sites
PeacemakerJack 10,670 #1940 Posted March 3, 2019 glad you found us. Obviously you don’t live in Wisconsin right now! We aren’t exactly looking at mowing lawn right now. Nice looking you have there. How long have you owned it? 2 1 Share this post Link to post Share on other sites
WHX?? 46,710 #1941 Posted March 3, 2019 On 3/2/2019 at 8:33 AM, bmiller0457 said: Yes is that all coming together now? will you have it on a tractor before winter is over? Will get it operational and hopefully a test with somemore late winter snow. Have the carriage on a tractor with some assembly today. 5 Share this post Link to post Share on other sites
Pullstart 59,585 #1942 Posted March 3, 2019 8 minutes ago, WHX22 said: Will get it operational and hopefully a test with somemore late winter snow. Have the carriage on a tractor with some assembly today. I’m obviously missing something here. What is this magnificence that the lift rod is lifting? 1 2 Share this post Link to post Share on other sites
WHX?? 46,710 #1943 Posted March 3, 2019 Rear carriage of a deuce ..minus the blower housing. Yesterday rebuilt a Schnacke with the help of Peacemaker Jack. 4 2 1 Share this post Link to post Share on other sites
953 nut 51,559 #1944 Posted March 3, 2019 4 hours ago, TyH said: mowed the yard Nice looking , most of us are a few weeks away from mowing. 2 1 Share this post Link to post Share on other sites
Super-C 4 me 612 #1945 Posted March 3, 2019 5 hours ago, WHX22 said: Will get it operational and hopefully a test with somemore late winter snow. Have the carriage on a tractor with some assembly today. Glad to see it coming along 1 Share this post Link to post Share on other sites
WHX?? 46,710 #1946 Posted March 3, 2019 Thanks Brian.. lift rod works like it was made for it! 1 Share this post Link to post Share on other sites
MIGHTYMO 50 #1947 Posted March 3, 2019 Just charging the battery. Gettin ready to sell my 314-8 1 Share this post Link to post Share on other sites
TyH 13 #1948 Posted March 4, 2019 6 hours ago, 953 nut said: Nice looking , most of us are a few weeks away from mowing. I was a little early but we get these winter weeds turn green with brown grass. So I just mowed I hop I did hurt my grass 1 Share this post Link to post Share on other sites
PeacemakerJack 10,670 #1949 Posted March 4, 2019 12 hours ago, WHX22 said: Rear carriage of a deuce ..minus the blower housing. Yesterday rebuilt a Schnacke with the help of Peacemaker Jack. Jim and I learned in a hurry that two sets of hands make the above process much easier than one set. There were some moments that even a 5th hand wouldn’t have been a bad idea but we made due with 4. Not saying that it would’ve been impossible with only one guy but I sure wouldn’t want to try it alone! It was fun to help out on that little project... 3 3 Share this post Link to post Share on other sites
Super-C 4 me 612 #1950 Posted March 4, 2019 On 3/3/2019 at 10:06 AM, pullstart said: I’m obviously missing something here. What is this magnificence that the lift rod is lifting? Nothing really WHX22 couldn't find one, so I had one made for him 1 Share this post Link to post Share on other sites
