squonk 38,921 #12301 Posted July 24, 2021 (edited) 6 hours ago, pfrederi said: I don't use a fuse, the Facet Posiflo pumps i use draw about 1.5 amps and have an internal 3.5 amp fuse. That's true but if the wire you ran for the pump somehow gets chafed and shorts to ground a fuse will stop a meltdown. I installed a 10 Amp fuses on my pump power supply wire right off the battery. Edited July 24, 2021 by squonk 3 Share this post Link to post Share on other sites
Stormin 9,975 #12302 Posted July 24, 2021 23 hours ago, Dan.gerous said: It has to be better than cranking for ages before fuel comes through. Boat primer bubs are handy. I have them on the C125 and the Black Horse. Just squeeze till you feel resistance and your away. 4 2 Share this post Link to post Share on other sites
OutdoorEnvy 1,420 #12303 Posted July 24, 2021 a friend sent me this...too funny... 1 4 2 Share this post Link to post Share on other sites
Dan.gerous 2,696 #12304 Posted July 24, 2021 1 hour ago, Stormin said: Boat primer bubs are handy. I have them on the C125 and the Black Horse. Just squeeze till you feel resistance and your away. I have them as well, best thing ever, but mine perished a while back so have been running without it. Two new ones arrived in the post today as it happens! But going to put in the fuel pump as well 🙂 2 Share this post Link to post Share on other sites
Snoopy11 5,713 #12305 Posted July 24, 2021 Here are some promised pictures of oil temperature gauge and sending unit installed... Fabricated up some exhaust pipe so it goes out the back... Put on a heavier duty starter solenoid... (not shown in these pictures, but I will share later)... Put a little flag on it!!! Don 3 1 Share this post Link to post Share on other sites
Snoopy11 5,713 #12306 Posted July 24, 2021 Here are some more pictures... Don 2 1 Share this post Link to post Share on other sites
Snoopy11 5,713 #12307 Posted July 24, 2021 Also, for guys who don't have good internet... I made a video with audio only... no video. Here is how my tractor sounds with my new exhaust... Don 2 Share this post Link to post Share on other sites
WheelHorse520H 706 #12308 Posted July 25, 2021 1 hour ago, Snoopy11 said: Also, for guys who don't have good internet... I made a video with audio only... no video. Here is how my tractor sounds with my new exhaust... Don Sounds great, can you tell me what post # the one with audio and video is, I’d really love to see it. 1 Share this post Link to post Share on other sites
OutdoorEnvy 1,420 #12309 Posted July 25, 2021 I like the coyote on the rocket sticker! That's pretty cool and perfect machine to put it on! 3 Share this post Link to post Share on other sites
Snoopy11 5,713 #12310 Posted July 25, 2021 36 minutes ago, WheelHorse520H said: Sounds great, can you tell me what post # the one with audio and video is, I’d really love to see it. Uh... there is no video... at all... only audio... LOL Don Share this post Link to post Share on other sites
Snoopy11 5,713 #12311 Posted July 25, 2021 21 minutes ago, OutdoorEnvy said: I like the coyote on the rocket sticker! That's pretty cool and perfect machine to put it on! Thanks, indeed, I feel the same way!!! Don 1 Share this post Link to post Share on other sites
Snoopy11 5,713 #12312 Posted July 25, 2021 (edited) 49 minutes ago, WheelHorse520H said: Sounds great, can you tell me what post # the one with audio and video is, I’d really love to see it. Reason I didn't include video is because some guys have issue with their internet playing it... and sometimes I have issues uploading video too... but I may make another video soon... with video... Feel free to view my previous videos though... clicking the link below... https://www.youtube.com/channel/UCjPGpC24JqZWNkB2nkpA_nQ Don Edited July 25, 2021 by Snoopy11 Share this post Link to post Share on other sites
Horse Newbie 6,859 #12313 Posted July 25, 2021 9 hours ago, Tuneup said: Well, the arbors are now disassembled and the support bracket has been welded. It's been a really good day. If it hits 90° w/ 80% humidity, I'll fire up the 516 to mow the back and get a good sweat going. Why sweat in a steam bath when it's a Georgia Summer and you get it for free? Is that a siren on the table ? Share this post Link to post Share on other sites
Tuneup 1,416 #12314 Posted July 25, 2021 Yes, will definitely try this. On this 48, 2 spindles had a red grease with some black contamination and the 3rd had a watered-down black grease. Watered-down in that it was very thin - maybe more toward thick oil than grease. I'll clean and finish them today and then it's on to the mounting components...thanks! 1 Share this post Link to post Share on other sites
Tuneup 1,416 #12315 Posted July 25, 2021 9 hours ago, Horse Newbie said: Is that a siren on the table ? Yeah - ain't it great what you can find at an estate sale? I got that for $15, an original klaxon for $10 and a barely used Briggs horizontal 3HP for $15. Always regret that I passed on an old freestanding drill press. I can't run that horn in the open air. People come out of their houses...was told it's from an ambulance. Was 1 of 2. 2 Share this post Link to post Share on other sites
Lee1977 6,217 #12316 Posted July 25, 2021 30 minutes ago, Tuneup said: Yes, will definitely try this. On this 48, 2 spindles had a red grease with some black contamination and the 3rd had a watered-down black grease. Watered-down in that it was very thin - maybe more toward thick oil than grease. I'll clean and finish them today and then it's on to the mounting components...thanks! Be sure to give them a good coat of primer and paint. I will help to keep the acid in the grass from eating them up. Share this post Link to post Share on other sites
Horse Newbie 6,859 #12317 Posted July 25, 2021 2 hours ago, Tuneup said: I can't run that horn in the open air I have one !... Does yours run on 12 volts too ? I am thinking about putting mine on a parade tractor... 1 Share this post Link to post Share on other sites
Tuneup 1,416 #12318 Posted July 25, 2021 1 hour ago, Horse Newbie said: I have one !... Does yours run on 12 volts too ? I am thinking about putting mine on a parade tractor... Yup - 12V. Not sure about that relay housing on it, though. I need to take it apart. 1 Share this post Link to post Share on other sites
Tuneup 1,416 #12319 Posted July 25, 2021 3 hours ago, Lee1977 said: Be sure to give them a good coat of primer and paint. I will help to keep the acid in the grass from eating them up. I just can't get these things clean enough. No access to blasting - would be painting over dirt in nooks and crannies. They're about as clean now as they can be and flush of old grease. I've got a few jam nuts and grease zerks to pick-up. Moving to the replacement bolts and nuts mode on the renew now. 1 Share this post Link to post Share on other sites
WheelHorse520H 706 #12320 Posted July 25, 2021 14 hours ago, Snoopy11 said: Uh... there is no video... at all... only audio... LOL Don I misunderstood your post with the video, I thought you had one with both and one with just sound. 1 Share this post Link to post Share on other sites
Shynon 7,435 #12321 Posted July 25, 2021 The ols Cessna pump on the loader blew out the side the other day. So on my only day off I made a new pump bracket for the new pump. 8 Share this post Link to post Share on other sites
WheelHorse520H 706 #12322 Posted July 25, 2021 (edited) 18 hours ago, Snoopy11 said: Feel free to view my previous videos though... clicking the link below... Watched the videos on YouTube, that thing is sick! And is that a mustang I saw there in the background? It looks pretty quick Edited July 25, 2021 by WheelHorse520H 1 Share this post Link to post Share on other sites
Snoopy11 5,713 #12323 Posted July 25, 2021 Nope... that is a 1995 Ford Ranger, believe it or not. It is just as physically monstrous and monstrous-sounding as my Hell Horse. Mustangs and muscle cars shake in their boots when this thing roars... You can see peeks of my Hell Horse in the background... Don 4 1 Share this post Link to post Share on other sites
WheelHorse520H 706 #12324 Posted July 25, 2021 I knew it was a Ford, the little chin spoiler and the lights threw me off. Yes I do see the Hell Horse in the back. I like the black paint on the horse too by the way. 1 Share this post Link to post Share on other sites
Snoopy11 5,713 #12325 Posted July 25, 2021 (edited) 6 minutes ago, WheelHorse520H said: I knew it was a Ford, the little chin spoiler and the lights threw me off. Yes I do see the Hell Horse in the back. I like the black paint on the horse too by the way. Thanks man, yeah... both of them are certainly heavily modified... I think... if I hadn't done a pretty good job with the black paint and clear coat... it would not look nearly as good. Got some good practice with air gun spray paint though!!! Don Edited July 25, 2021 by Snoopy11 1 Share this post Link to post Share on other sites
