nylyon-(Admin) 7,114 #1 Posted May 29, 2017 Couple of weeks ago, I picked up a bunch of stuff. One of them was a 310-8 and a 36" SD deck. The deck had no belts, blades, nuts for the blades, or idler pulley. The deck is solid, spindles seemed pretty good so I bought blades, belts and nuts. I just finished putting it together now and took it for a little mow. I am quite impressed with this little deck, it's super quiet (the spindles are perfect) cuts pretty nicely too, and it can get into places which my larger decks just can't. I need to do some serious tuning on the 310 though to run such a big deck! 2 Share this post Link to post Share on other sites
slammer302 2,154 #2 Posted May 29, 2017 Yeah those 36" decks take sum serious hp to turn. Share this post Link to post Share on other sites
pfrederi 17,129 #3 Posted May 29, 2017 310-8s should have no problem with 36" deck. It a K series or Magnum??? Share this post Link to post Share on other sites
nylyon-(Admin) 7,114 #4 Posted May 29, 2017 It's a K series, I'm sure it needs some carb work. Had to do some work on the 312 and the 416, tomorrow I'll see what I can tinker with on the 310. Share this post Link to post Share on other sites
Irv 115 #5 Posted May 30, 2017 Karl, are you sure it's not a 37" deck? I thought the 36" decks were only on the older horses. Just curious. Share this post Link to post Share on other sites
slammer302 2,154 #7 Posted May 31, 2017 Looks like a 36" too me. 1 Share this post Link to post Share on other sites