Randy Prigge 0 #1 Posted August 23, 2016 I was given information on a New Holland snow blower #9861908 that is equitant to Wheel Horse #79263 for use on a 268H tractor. Can someone confirm that this blower will fit my 268H ? Thank you Share this post Link to post Share on other sites
Achto 26,554 #2 Posted August 23, 2016 I don't know the answer to your question, but I'm sure someone here can help you out. Share this post Link to post Share on other sites
WNYPCRepair 1,875 #3 Posted August 23, 2016 I'm no expert but the only New Holland implements that cross over to Toro/Wheel Horse that I am aware of is for the XI series. For Instance I have a NH GT22A that is a twin to my 522XI, and all the implements will swap over with no problem. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,498 #4 Posted August 23, 2016 The 79263 fits one of the 268-H models I looked at but don't know if the 9861908 is the same. This operator manual has a different model number on it that one has to assume it is a New Holland model number. Don't see that often. Garry 2 hours ago, WNYPCRepair said: I'm no expert but the only New Holland implements that cross over to Toro/Wheel Horse that I am aware of is for the XI series. For Instance I have a NH GT22A that is a twin to my 522XI, and all the implements will swap over with no problem. These 3 pages come up with a search of our manuals for New Holland http://www.wheelhorseforum.com/search/?q=new+holland&type=downloads_file Garry Share this post Link to post Share on other sites
shallowwatersailor 3,213 #5 Posted August 24, 2016 I don't think that will fit. It is for a Ford/New Holland Garden Tractor. The Toro/New Holland tractors are LS and MY series in blue and are the same frame as your Toro 268H. Call a NH dealer and ask them for sure. Share this post Link to post Share on other sites
Reuben357 1 #6 Posted December 20, 2017 (edited) The New Holland blower will mount on the Wheel Horse and you have a vertical shaft engine with a mule and PTO on the lower end of the shaft, it SHOULD work for you. I have a FORD NEW HOLLAND LS 35. The attach-a-matic (front mount) was bent and New Holland wanted more than I was willing to pay so I bought the same one from TORO for less money. The only difference was the color and I don't mind red on a blue tractor. Edited December 20, 2017 by Reuben357 Share this post Link to post Share on other sites
Skipper 1,788 #7 Posted December 20, 2017 There were other implements that would fit too from NH. The NH tiller is exactly the same as the 36" WH 1 Share this post Link to post Share on other sites