Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rob R
      Complete Heavy Duty Wheel Horse Three Point Hitch Attacment with class one (1) drawbar. This Attachment is relatively easy to install; remove shifter panel, seat and set ratchet panel and bolt this in. Unit comes with EVERYTHING you need to install on a 1969>72 GT14. Includes: Rock Shaft, Rear Axle Bracket, Drawbar, 2" Trailer adapter, Stainless Steel side chain adjusters. Center adjustable Link. Everything is Heavy Duty. All bolts, pins and clips are included. Brewster,  NY Pick-up; Cell 914-282-0050






    • By Rob R
      Sooo about three months ago I had a friend of a friend pass to me the most needy Wheel Horse GT14 Tractor I had ever seen, it was completely taken apart every single part had rust and two coats on oil paint one blue and one yellow. parts were missing and of course there was no labeling of parts or assembly there-of. All wiring, gauges, rectifiers were removed and non existent….. still the machine was calling to me to try and do the almost impossible...… My thanks to Aldon for parts and support and Kyle for Technical help and shoulder to cry on. ….  The only saving grace of the entire project is that the engine and tranny were indeed still good...… in fact the only remaining issue I have on the machine is that I cannot free-up the relief valve so that I can move the machine w/o power..... I think this might be stuck forever … but not the end of the world. 



















    • By ChaplainManny
      Hi. I'm Chaplain Manny. I was wondering if you supply the decals for the gt14, the kohler k321 engine? 
      If you do, could you give me a quote, and tell me how long is the turn around?
      Thank you. 
    • By swisstrac
      Would someone   know if it is possible to remove the gas tank without taking off the grille    in order to to work on  fuel pump and carb on the GT14  1970 model with full grille   thanks  for your hep//Ray
×