Jump to content
tlj87

520H 60" deck overall width

Recommended Posts

tlj87

Hello, my employer has what I have believe to be a 1990 model year, 520H with 60" mower (earlier style with skids on front corners) that has been sitting in a building, unused, for approximately 7 years.  Other than being dusty, it appears to be in good condition.  I believe it has about 700 hours on the meter.  As far as I know, nothing is wrong with it, but we will be conducting a thorough examination, and if OK, a complete cleaning and service of the unit to get it back into shape.  If there is a problem (Onan valve issue, etc.), we will probably sell it.

 

Anyhow, if possible, could someone with a 60" mower provide for me a measurement of total width of the deck, with and without the chute/deflector?  I'd measure this myself, but the unit is an hour away from me.

I am interested in knowing if this would fit in a 6x12 enclosed trailer for transport.  Thank you!

 

Update:  After I posted this, I found the answer to my question - about 65".  Sorry about that!  Anything I should check/look out for otherwise on a 520H that has been sitting?

Edited by tlj87
found the answer

Share this post


Link to post
Share on other sites
 
cheesegrader

This just came up about a week ago.

Look in the main forum.

Post was "buying a 520 in three days" by kwksand.

You might get lucky.  A new battery, an air compressor, and a can of gas is all it took to fire up and drive away my last barn find.

Of course, once it was home, it turned onto new tires, carb cleaning, re-wiring, power washing, greasing, new filters and fluids.....

Share this post


Link to post
Share on other sites
 
daveoman1966

That 520 with the 60" deck should easily fit in the 6 x 12 trailer.  I have a 1991 S-10 Long-bed pickup and loaded a 520H with 60" deck into the bed (<4 x >7)  and hauled it from Barker NY to my garage about 3 years ago.  Of course, I had to take the deck off to fit into the bed, and stood it up against the back of the cab with a 1/2 sheet of plywood to protect my back window.  The deck stuck out a foot or so on the passenger side, but that's ok.  With that on board, I backed the 520 into the bed, right against the deck...with a flat tire between them.  My little S-10 was VERY easy to steer and the ride was nice and smooth too.     

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Duramax7man7
      By Duramax7man7
      Very Solid tractor! Starts right up and Runs and Cuts like a Champ! 

      ONLY 419hrs

      FEATURES:
      Newer Agro Tires on Rear & Solid Front Turf Tires.
      Wheel Weights on rear.
      Fully Swapped Forward Swept axle and Steering off of 520h.
      New Tractor Supply Adjustable Seat.
      Exhaust Fully Restored. (Sandblasted, Outgassed and 2000deg High Temp Satin Exhaust Paint Coated.)

       I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      Asking >>>>> $1,099 OBO <<<<<<< 

      (248) 943-8634 Text or Call.  God Bless. 




    • Duramax7man7
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • Joe Warren
      By Joe Warren
      Mower Spindle Components
      mostly new old stock
      Prices shown do not include the cost to ship.
      Message me with your needs and any questions.
      Thank you.
      Joe
       
      PART NUMBER(S)
      DESCRIPTION
      QTY. AVAILABLE
      PRICE EACH
      103711
      NOS Spindle shaft assembly
      1
      39
      103711 (used)
      Used spindle shaft assembly
      1
      29
      101686 or 5875
      NOS Spindle shaft sub-assembly
      1
      49
      104890
      NOS Spindle shaft
      1
      49
      104982
      NOS Spindle shaft
      1
      44
      107998 or 107446
      NOS Spindle shaft
      2
      89
      109912
      NOS Spindle shaft
      1
      59
      112673 or 109965
      NOS Spindle shaft
      1
      59
      108849
      NOS Spindle shaft
      1
      89
      102780 or 104373
      NOS Spindle cups 1.0” tall
      2
      39
      ??????
      NOS Spindle cups 0.9” tall
      2
      39
      102784 or 104374
      NOS Spindle cups 0.8” tall
      1
      39
       
       
       
       
      100289
      NOS Needle bearing, MFD USA Torrington
      2
      19
      101411
      NOS Ball bearing, sealed both sides, MFD China
      2
      29
      101480 or 1515 or 5493
      NOS Ball bearing, sealed both sides, MFD China
      6
      9
       
       
       
       
      106084
      NOS Ball bearing, sealed one side, MFD Japan
      11
      9
      106085
      NOS Ball bearing, open, not sealed, MFD Taiwan
      16
      9
       
       
       
       
      106070
      NOS Seal spacer
      10
      9
      100674
      NOS Spacer-pulley
      1
      13
      107445
      NOS Spacer-bearing
      1
      9
      106069
      NOS Spacer
      1
      9
       
       
       
       
      110234
      NOS Lock bolt-pulley
      4
      2
      110242 or 908033
      NOS Lock bolt-blade
      11
      2
      915090 or 32146-20
      NOS Lock nut-pulley
      11
      2
      936028 or 32120-42 or 52-6640
      NOS Snap ring
      7
      2
      8389
      spindle housing
      1
      39




    • RJ Hamner
      By RJ Hamner
      Now that we are finding more uses for the 1990 520H with a KwikWay loader I am experiencing some power loss in the hydro after about a half hour to 45 minutes??????
      Ideas?
    • lodestonefarm
      By lodestonefarm
      Selling my trusty WH520H.  ~880 hours (currently used for moving snow when needed so hours may rise) very solid machine, strong and hardworking.  20HP Onan, hydro transmission and hydraulic lift.  Has Matt's foot-pedal conversion for forward/reverse.  Included in the sale is a tall-chute snow blower and 60" mowing deck.  The blower is in excellent condition and is on the tractor currently.  The mowing deck has been a workhorse over the years.  No holes but could use some TLC, probably needs new spindles at some point and could use a couple spots touched up with welder also does NOT have any pulley covers/protectors (see photo).  Tractor has been an incredible tool, very solid and dependable and I'm certainly going to miss her when she's gone.   
       
      Recent maintenance: replaced the plugs this summer, fluids as needed (hydro has about 100 hours on fluid/filter; oil was done in the spring and has about 25 hours on it).  Battery is about 3 years old as are the tires, Terra Trac tires on the rear and turfs on the front.  The seat (with arm rests) isn't in great shape.  I've got a cover for the seat, never used.  It's never really bothered me but new seat cover is included in sale as are 4 hub caps, chains for the rear tires, and some misc spare parts (see photos).  
       
      I've owed this machine about 8 year and put ~350 hours on her.  She's not a show piece but could be restored.  Sheet metal is generally in shape, no rust however the hood does have a couple dings in it.  
       
      I'm only selling because I'm trying to help my son get a small lawn care business started and looking to move to a zero-turn.  The 60" deck is too large for our trailer, the mowing deck lacks pulley safety shields, and we'd like something that mows faster.  My only complaint with this machine is the top-speed (which isn't great when comparing to today's machines) otherwise she's a beast.  They don't make them like this anymore.  





×
×
  • Create New...