Buzz 502 #1 Posted June 23, 2015 Does any one know the part number or a source for the bushing that goes on the steering shaft where it goes through the gas tank on the 854? Share this post Link to post Share on other sites
sorekiwi 761 #2 Posted June 23, 2015 I dont have a part # or measurements handy Buzz, but it is a commonly available bushing.McMaster Carr should have one, and I am fairly sure I have bought one from Tractor Supply as well. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,496 #3 Posted June 23, 2015 (edited) Be the same on a 654? Not likely as the tanks are different.If so the nylon 1539 bushing has been replaced by sintered iron bushing 101442 and still available from Toro.Garry Edited June 23, 2015 by gwest_ca Share this post Link to post Share on other sites
Lane Ranger 10,495 #4 Posted May 8, 2020 Lowell S. sells the #1539 steering column bushing used on early tractors. Available at: wheelhorsepartsandmore.com Share this post Link to post Share on other sites
Lee1977 6,217 #5 Posted May 8, 2020 all the Wheel Horse steering columns I have seen are 3/4". My guess is that the bushing is 3/4" ID and 7/8" OD. Share this post Link to post Share on other sites