Jump to content

Recommended Posts


Hello everyone, I'm a proud new wheel horse owner having just purchased an oldie but a goodie, I'm already impressed and amazed at the ruggedness of these tractors and can't wait to put it to work........I'm Looking for a few accessories for a 1971 GT14 1-0500-6...specifically, i'm looking for a mower deck, dump cart and a snow blower....does anyone have any idea what part numbers I would need...also need an owners manual/maintenance manual for the 1-0500 but can't seem to find any for a 1971 GT14 in the downloads ....

Does anyone know the differences between the 69 through 72 GT14's

thanks for any info you could give!

Share this post

Link to post
Share on other sites

Welcome to the forum. Everything you asked for can be found in the Forums Manual section. Mower Decks and Plows can be found with some time spent perusing this sites wanted and classified section, Craigslist and Ebay. Tillers and Snow Blowers for this tractor series are somewhat rare. Be aware that the Mower Deck and mule drive is specific to the tractor or a couple models due to the way it attaches. It is not like the later series attach-a-matic implements of the later 70's, 80's and early 90's tractors.

Share this post

Link to post
Share on other sites

thanks for the input Aldon...I'm just in the early stages of figuring out what I have purchased! Pretty neat little tractor...I'm anxious to see what all it can do.

Share this post

Link to post
Share on other sites
953 nut
:WRS:  Once you bolt a tach-a-matic to your frame you can use most Wheel Horse decks. The drive belt arrangement on the earlier decks (1967 to 1973) can look a bit strange, but once you have used it a few times it will seem natural. You could also attach a mule drive to the front of the GT-14 to use a later model deck.

The correct deck is 5-1201, take a look at the manual for it on this site.

Hope this helps.
Edited by 953 nut
  • Like 1

Share this post

Link to post
Share on other sites

Welcome to the forum.

If you search the files using 1-0500 this is where it takes you
Look for the D&A file which is Details and Attachments. The attachment list includes the attachment at the time, the one that replaced the original and often the model current when the list was made. You are not limited to these because often there are more models between the last two. Of course earlier models did not make the list either. Doing a search for GT-14 will bring them all up and there should be a D&A file for each of them also. Once you have the individual model numbers you can search for those.
You may have already figured that out.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Boyd
      By Boyd
      wheel horse garden tractor mower, rear discharge mowing deck & snow blower both in good condition and runs well. all the parts for the snow blower are with it.

    • JayB
      By JayB
      mower deck in very good condition

    • Bill D
      By Bill D
      Picked up this Toro Power Max yesterday.  The rake is shot but the gearbox is good and the shaft isn't bent.   Why Toro doesn't use shear bolts, I'll never know.

    • AndyZ
      By AndyZ
      Operator manual #A-5274
      6 pages 7.31MB
      Illustrated parts list link
      Use the 1970 parts list for the Raider 10 model 1-6051 and Raider 12 models 1-6251 and 1-6253 with the following exceptions
      For 1970 electric clutch use Electro 12 model 1-7255
      2 pages 282KB
      We also have the 1971 tractor parts manual that followed
      1971 Raider 10 model 1-0300 - (1-0300-6) - Uses HH100-115145C with magneto ignition (Engine oil capacity 2 quarts)
      1971 Raider 12 model 1-0310 - (1-0310-6) - Uses K301S-47407C with breakerless magneto ignition (This model also made in Belgium) (Engine oil capacity 2 quarts)
    • Ifixoldjunk
      By Ifixoldjunk
      I just bought a deck for my 310-8, it’s a 42inch rear discharge, it came with a complete parts tractor, but I need new belts for it. Does anyone know what size belts I need?
  • Create New...