bmghog 3 #1 Posted April 10, 2015 (edited) Good evening, i am trying to remove the bell crank as the snowthrower arm broke. what's the best way to get it out? any help is appreciated. Edited April 11, 2015 by bmghog Share this post Link to post Share on other sites
WH nut 553 #2 Posted April 11, 2015 Should be able to remove the both hand side covers and remove the E clips on the right side and slide the shaft out. Oh, there are a couple of hair pin clips either side of the belcrank. Never seize and install in reverse order Share this post Link to post Share on other sites
bmghog 3 #3 Posted April 11, 2015 thanks i have that all apart but that dang bell crank is siezed on the shaft...going to put heat to it today...if all else fails will need to cut it. Share this post Link to post Share on other sites
WH nut 553 #4 Posted April 11, 2015 So the arm broke off? You can try splitting it at the key with a sharp chisel. Share this post Link to post Share on other sites
baerpath 517 #5 Posted April 11, 2015 Heat should do it. Or a steady hand with a big sledge hammer to break it loose Share this post Link to post Share on other sites
bmghog 3 #6 Posted April 11, 2015 I got it out what a pain 1 Share this post Link to post Share on other sites
bmghog 3 #7 Posted April 11, 2015 Anyone have a bell crank for sale after getting it off there are two arms missing Share this post Link to post Share on other sites
bmghog 3 #8 Posted April 11, 2015 So i think i can weld the arm back on. Anyone have a good pic of what it looks like.. Share this post Link to post Share on other sites
baerpath 517 #9 Posted April 11, 2015 I have one from a 416 for the cost of shipping Should be the same 1 Share this post Link to post Share on other sites
baerpath 517 #11 Posted April 11, 2015 I'll see if it will fit in a flat rate box and let you know Share this post Link to post Share on other sites
bmghog 3 #12 Posted April 16, 2015 Okay its welded and back on...what a b to get out....slid back together though....not to get the deck back on and get to cuittin Share this post Link to post Share on other sites
