Jump to content
rmaynard

9-Pin Connector Kits for 300/400/520 Series

Recommended Posts

rmaynard

Direct fit replacement for the notorious 9-pin connectors that fail in the 300/400/520 series tractors.

 

These connectors are the exact replacements for ones used by Wheel Horse. If you are replacing both male and female sides, there is no problem using any 9-pin connector with .093" pins. But if you are only replacing one side, this will fit your existing OEM connector. All 9-pin connectors are not the same

 

Kit includes both male and female connectors, and 9 each male and female .093" pins.

 

9-pin-WH.jpg

 

 

 

CLICK HERE TO ORDER

 

Note: Pins can be soldered, but if you need a good open barrel type crimper to install them, contact me for a good source.

 

Thanks!

Edited by rmaynard
  • Like 8

Share this post


Link to post
Share on other sites
 
bmsgaffer

I'm going to be in for a couple of everything you sell once you get your lug nut kits up for sale! What crimp tool do you recommend for these?

Share this post


Link to post
Share on other sites
 
rmaynard

Brandon,

For crimping open barrel terminals and pins, I recommend this:

post-2221-0-03991500-1428808494.jpg

http://www.amazon.com/dp/B0050KDKUC/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=PSE0MLM1C1F3&coliid=I1GXDCKO2XQJS5

 

 

To remove the pins from the connectors, I have one of these:

post-2221-0-50160700-1428808204.jpg 

http://www.amazon.com/dp/B0094MIS9U/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=PSE0MLM1C1F3&coliid=IMZR1SP7N48SN

 

 

and one of these:

post-2221-0-44015500-1428808392.jpg

http://www.amazon.com/gp/product/B0009OR906/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

 

Either one will work fine.

Edited by rmaynard
  • Like 1

Share this post


Link to post
Share on other sites
 
rmaynard

Happy to report that the 9-PIN Connectors are back in stock

 

post-2221-0-86482700-1428235423.jpg

 

CLICK HERE TO ORDER

Share this post


Link to post
Share on other sites
 

×
×
  • Create New...