Jerrybyrddog 0 #1 Posted May 24, 2014 (edited) I bought a rear PTO for my D-200 that I picked up last week. Last night I received the PTO. I was expecting a female end to receive the male PTO on a Wheel Horse tiller I got a few days ago. But there is a male spline on each end. Whats up with that? It came off of a D-200 being parted out. Is there a modification or adaptor? Thanks for your help. Edited May 24, 2014 by Jerrybyrddog Share this post Link to post Share on other sites
whfan74 2,015 #2 Posted May 24, 2014 There is an adapter that runs from the PTO and down to the tiller itself. This piece has female adapters on each end. Share this post Link to post Share on other sites
pfrederi 17,027 #3 Posted May 24, 2014 You didn't get all the parts...you need items 21/22 on this picture Share this post Link to post Share on other sites
Marv 844 #4 Posted May 27, 2014 Here is pictures of the part you need. Share this post Link to post Share on other sites
u170293 0 #5 Posted May 31, 2014 I have a related question - I have a D-200 also with a PTO, the tractor came with a Tiller but only half of a PTO shaft. The tiller side half of the shaft is attached to the tiller but the part that mates up to the tractor is missing, Anyone know a source for the pieces I would need to build a shaft? Share this post Link to post Share on other sites
coldone 35 #6 Posted May 31, 2014 here is a link to the neapco pdf on the drive shaft components. http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0CFEQFjAE&url=http%3A%2F%2Fwww.neapco.com%2FnA-aftermarket-catalogs.php%3Fpdffile%3D5&ei=GEKJU8DuJ8bQsQShhYDIAw&usg=AFQjCNFJeQXv88X3YclE4gVW0TDazUgwHQ&sig2=538VJnIj-b-82FuHpjmOYA&bvm=bv.67720277,d.cWc At least I hope it shows up that way. If not Google "neapco yoke specs". That should give you an idea of what you need to build the other half. Share this post Link to post Share on other sites