Bill Allert 68 #1 Posted May 12, 2013 Does anybody have their belt cover off on a l-157?? I need a few measurements. My mounting tab is half missing & I need to know; 1) length from the bend, 2) center of mounting hole to end of bracket. See the attached picture. Thanks again!! Bill Share this post Link to post Share on other sites
WH854 44 #2 Posted May 12, 2013 Does anybody have their belt cover off on a l-157?? I need a few measurements. My mounting tab is half missing & I need to know; 1) length from the bend, 2) center of mounting hole to end of bracket. See the attached picture. Thanks again!! Bill Maybe this link will help Chas Share this post Link to post Share on other sites
Bill Allert 68 #3 Posted May 12, 2013 Thanks for the effort Chas, but mine has a welded bracket on the inside of the cover. If it helps anyone, I could take a picture of what's left of mine. Share this post Link to post Share on other sites
rmaynard 14,888 #4 Posted May 12, 2013 I am not able to take a picture at this time, but if you haven't gotten one by tomorrow, I will take one of mine and post it in the morning. Share this post Link to post Share on other sites
Bill Allert 68 #5 Posted May 13, 2013 Thanks. Here's a picture of mine which is broken off. I need to know how long this was & how far the hole is from the bend (or end). Thanks again! Share this post Link to post Share on other sites
rmaynard 14,888 #6 Posted May 13, 2013 Here is the picture: Share this post Link to post Share on other sites
Bill Allert 68 #7 Posted May 13, 2013 Thanks!! That was just what I needed. Share this post Link to post Share on other sites