reeman-uk 5 #1 Posted May 27, 2011 Posted on another forum too. I am planning to build a forklift to hang from the back of my D-160. It will weigh a lot even before I lift something. I don't want to damage the rear axle or any major parts as I live in the UK and part are impossible to find. Does anyone know how much weight I can hang off the back of my D-160 without risk of breaking anything? Also I need new mufflers for my D-160 and D-200, does anyone know of a muffler I can use that will fit in the original location? Thanks Iain Share this post Link to post Share on other sites
bitten 133 #2 Posted May 28, 2011 I made an attachment with forks on it that goes on my D200. All it does is raise pallets ( or what ever ) off of the ground. The thing is heavy but it is in the same weight area as the tiller that I have is. I cant help you if you are talking about something that would raise higher than the 3 point would allow, as I know that the carriage for something like that would add a considerable amount of weight. Good Luck. Share this post Link to post Share on other sites
neil 2,398 #3 Posted May 28, 2011 :hide: Lain from Neil in Sunny Somerset. where you from , and some pics of your tractors would be cool, Share this post Link to post Share on other sites