Nick 13 #1 Posted February 16, 2008 I was just looking around ebay for 3pt parts and ideas when I came across this Rear Blade. It has rippers on the back that flip out of the way when pulling it but when the blade is turned around they dig in. I'm not sure how the design would work scaled down for a Wheel horse clevis hitch and cat-0 3pt or if it even has any advantages over a box blade with ripper shanks. With the flip up shanks and offset design it is unique looking piece of equipment. Gives me some ideas for future projects anyways. :thumbs: Share this post Link to post Share on other sites
combatmp29r 27 #2 Posted February 16, 2008 That is a different design. I think you could make the ripers all mounted on a bar that flips up as a set instead of having to make all the individual mounts in the smaller scale. Definately gets some decent Ideas flowing. Share this post Link to post Share on other sites
kpinnc 10,710 #3 Posted February 16, 2008 I like the adjustable offset even more than the ripper design. Decisions, decisions...... Kevin Share this post Link to post Share on other sites
69DEZ 4 #4 Posted February 16, 2008 I like it!!! Another project if I get an actuator to make a rear hitch! :thumbs: Share this post Link to post Share on other sites
combatmp29r 27 #5 Posted February 16, 2008 John I have all the dimensions drawn up for the rear clevis hitch for our verts. 8-5311. I have a decent copy of the manual too :thumbs: Share this post Link to post Share on other sites