Jump to content

Search the Community

Showing results for tags 'no spark'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Wheel Horse
    • Wheel Horse Tractors
    • Wheel Horse Electric / Battery Powered Tractors
    • Engines
    • Transmissions and transaxles
    • Wheel Horse Electrical
    • Implements and Attachments
    • Restorations, Modifications, & Customizations
    • Pullers
    • WIKI Discussion
  • Wheel Horse Reference
    • Wheel Horse Manuals
    • RedSquare Links
    • Instructional threads and video's
    • Tools and Equipment
  • Europe
    • Euro Introductions
    • Show Pictures
    • Euro Classifieds
  • Picture Gallery
    • Wheel Horse Picture Gallery
    • Implements Picture Gallery
    • Show Pictures
    • LIVE Broadcasts
  • Classifieds
    • Classifieds
    • Haulin Help
    • Vendors
  • General Talk
    • non tractor related discussion
    • Introductions
    • Bumps and Bruises
    • site suggestions, updates, issues
    • Just for Fun
    • other brands
    • Gardening
  • Shows and Events
    • Wheel Horse Collectors Club Show
    • 2023 WHCC Show Pictures
    • RedSquare Herd
    • General Shows and events
  • 520 Club's 520 Specific

Categories

  • Wheel Horse Manuals
    • 1955-1964
    • 1965-1972
    • 1973-1977
    • 1978-1984
    • 1985-1990
    • 1991-1997
    • 1998-2012
    • All years
    • Service Bulletins
  • Implement Manuals
    • Mower decks & reel
    • Blades Dozer Grader Snow
    • Snow Blowers
    • Ground engaging
    • Other
  • Engine Manuals
    • Kohler
    • Onan Service Manuals
    • Other
  • Transmission
    • Manual
    • Automatic / Hydro
  • Electrical
  • Brochures
  • RedSquare Calendars
  • Wheel Horse 3D
  • Misc. Items

Blogs

There are no results to display.

There are no results to display.

Categories

  • Records

Categories

  • Wheel Horse for Sale
  • Euro Wheel Horse For Sale
  • Wanted
  • Euro Wanted
  • Vendors
    • K&B Wheelhorse Parts
  • Trade
  • Euro Trade
  • Non-Wheel Horse
  • Euro non-Wheel Horse
  • Wheel Horse Sold Archive

Categories

  • Tractors
  • Implements

Marker Groups

  • Members
  • Shows and events

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Found 15 results

  1. Tenday

    No Spark on 417-8

    Experts - help please. I’m new to Wheel Horse Tractor life! So - I’ve pulled out an inherited tractor and have decided to resurrect her. Unfortunately, no spark :/ I’m looking for help on diagnosing no spark. model - 417-8 engine - Kohler KT17 Done thus far: (aware that some have no implication on spark.) - new ignition switch - new battery - new starter - new ignition coil and wires w/ plugs - new condenser - new points - new starter solenoid - bypassed all switches except oil and seat. notes: idiot lights removed. All fuses tested with Ohms as well as visual inspection .. coil tested w/ ohms as well all switches bypassed except: -oil switch ( don’t think it has any implications other than a visual indication for idiot lights. ) -seat switch ran a pos from batt direct to pos of coil - nothing; no spark. Electric is as follows: - Starter switch wired to solenoid - - solenoid to starter - - solenoid to batt - one wire from starter switch goes to engine ( I think this is for batt charge / flywheel) - I have two yellow wires, which are married up, that go to engine which have constant power; They power coil. Comes from switch and seat. Help - what the heck am I missing ?
  2. I'm new here, but I have years and miles of dealing with electrical issues with my 1997 416H, engine Onan P216G (I am the only owner) . Problem description: the start circuit turns the starter over fine, but no spark at the plugs or the coil sockets by spark tester. The ignition trigger tests good by connecting a test light to the coil positive and and the ignition trigger negative lead, plenty of light flash from the test light in unison with the engine turning over. So, I conclude the ignition trigger, replaced 3/18/2021 along with the coil is good. I have followed the "Demystification" wiring diagram in detail and there is 12V at the coil positive terminal, wiriing is solid (for now), all those damn safety switches, key switch, and relays work too. I conclude that the coil is bad since the primary side tests 3.1 OHM and the secondary tests infinite OHMS (1. displayed on multimeter). Two coils (Onan part# 166-0820) have NEW dates of 3/2021 and 8/2021, and yes both have the same test results mentioned. Infinite OHMs to me means the coil windings are broken. The most recent coil came from Onanparts.com and tested as mentioned above when it arrived. Onanparts won't take anything back! There are a lot of coils on ebay and various suppliers from China. Maybe good, maybe bad, who can tell? And most suppliers won't accept returned electrical parts. Please help: What are good test readings for a GOOD coil (primary and secondary). Who do you recommend as a reliable supplier for a new coil? Thanks for any help! Rollo416H
  3. Okay, INTRODUCTION: So if you've problem solved all other aspects regarding your non-starting Onan engine with electronic spark control and come to the conclusion that you need to replace the Ignition module, keep reading. This is a decent step by step and doesn't require the engine to be removed the from the tractor. Although it might be a little easier to work on while on a workbench. The part numbers for the Module and ring if needed are below: Ignition Module: 166-0785 Spark Ring: 166-0767 Here is a list of the tools that I needed to complete the job from beginning to the end. They are named from left to right in the photo with the tools at the top of the photo last from top to bottom. TOOLS: [From left in Photo] 1. T25 (for the stator screws but also may be three 5/16" head screws) 2. Phillips and Flat Head Screw Drivers 3. Needle Nose and standard slip joint pliers 4. Flywheel puller with 2 5/16" x 18 grade 8 bolts and washers (mine is technically a steering wheel puller) 5. 7mm and 5/16" deep well 1/4" sockets 6. 3" 3/8" drive extension, 3/8" socket 3/8" drive, 5/8" socket 1/2" drive and 5" 1/2" drive extension. 7. 1/4" Socket Driver 8. 5/8" open end box wrench 9. 3/8" and 1/2" drive ratchets [Top of photo- top to bottom] 10. Flash light (optional but very helpful at times) 11. Pry bar (used to lock flywheel from turning) 12 1/2" Torque wrench 13. Old Tooth Brush (for cleaning of dirt if needed) PROCESS: - Obviously the first thing to do for safety sake is to shut of the fuel at the tank and remove the battery cables - Next, remove the two screws that hold the fuel pump onto the shroud, move the pump off to the side and replace the screws into their holes for safe keeping. - Carefully pull the fuel pump away from the shroud enough to work the hose clamp out and use the pliers to pinch the hose clamp and remove the vacuum line for pump. - Tie the fuel line, wiring harness, choke cable and battery cable all out of the way towards the rear of the tractor allow easy access to remove the shroud. - Next remove the air cleaner box cap, then air cleaner cap and air cleaner tray by removing the three 5/16" screws from the carb and the two 3/8" screws from the tray and put all aside and out of the way. NOTE: Close the Choke all of the way and stuff a clean paper towel into the top of the carb to prevent debris contamination. - Next, twist the air filter box bracket to the left (right side up and left side down) to clear space and use the 7mm, 5/16" and 1/4" socket driver to remove the black condenser wire, the red and black ignition module wires and the yellow ignition switch wire from the coil and then remove the coil using the 3/8" socket. (optional as it can be kept on the shroud but makes it a little more difficult.) - Next loosen the rear cylinders top shroud and engine hoist mount bolt with the 1/2" 3/8" sock and extension. (no need to remove the bolt as the shroud just needs to move freely. - Next, locate the wire retaining clip at the top of the shroud by the coil and open it up so the oil pressure sensor, stator and ignition module wires can all be removed when taking out the shroud. - Last step before removing the shroud is to disconnect the throttle to gov arm spring and the throttle cable using the 5/16" socket and driver. -Next locate all of the shroud bolts and remove using the 3/8" socket. - To remove the shroud, pull the bottom out first and then shift the entire piece upwards while working it from underneath the rear cylinder shroud, underneath the filter box bracket and over the flywheel on the left side. Work slow so you don't bend or brake anything and it will come off pretty easily. - Although everything was fairly clean in comparison to other engines at this step, my shroud was dirty and this can slightly decrease air flow which is important to maximize and keep optimal with an air cooled engine. So I took mine outside and pressure washed it to give it time to dry completely before reinstall. Shroud off... - Next, place the pry bar into the fins of the flywheel and lock the flywheel in place by placing the handle of the pry bar under the foot rest. Then use the 5/8" sock, 1/2" extension and loosen up the flywheel bolt about 3/8" -1/2" out of the hole. This needs to stay mostly in as a pressure point for the puller. - Next, remove two of the flywheel grill center bolts and then use your two 5/16" grade 8 bolts and attach the puller to the flywheel while keeping the puller parallel to the surface of the flywheel to allow equal pulling pressure on both sides of the puller while cranking on the center pressure bolt on the puller. - Now it's time to remove the flywheel. It may be a good idea to use the 5/8" open ended box wrench to stop the flywheel bolt from turning while cranking on the puller center bolt. - It should only take a 3-5 good cranks after finger tightening the center bolt and the flywheel will give a good pop and be ready to be pulled off. Don't forget about the flywheel bolt first! - Next, carefully pull the flywheel off of the crank being very careful not to get caught on the stator itself. My flywheel was pretty dirty on the inside and between the magnets so I felt it necessary to use the toothbrush and air gun to clean it out. - Now you'll need to remove the stator by using either 5/16" socket or T25 torque bit or driver. - Next, set the stator off to the side securely on a clean rag or similar. Underneath, you'll see the ignition module on the bottom side of crank. There are two 5/16" head machine screws. Remove those and open the wire retaining clip on the side of the gear cover and the module comes right off. Make sure not to lose the black rectangular insulator that goes between the module and gear cover. That needs to be there. I'm not 100% sure but I have a theory that these modules may potentially go bad from getting covered with grass and debris over time from not blowing out the air shrouds with a leaf blower or air gun after each use. This debris builds up enough to cause insulation around the module. The module being an IC (Integrated Circuit) is designed to handle only so much heat. Over time the extra heat and expansion with contraction when cooled back down causes a when point in the modules chip circuitry and eventually breaks. Thus causing the engine to shut off during operation for the first time. Once the engine cools, the chip materials contract, allowing the circuit to bridge again only until the engine heats up enough to break that signal and then becomes a cycle until replaced. - Moving on.. While everything is out, if needed (or your OCD kicks in), clean the cylinder heat syncs and general area before re-installation of the Module, Stator, Flywheel and Shroud. Mine wasn't to bad so I quickly used the toothbrush and air gun to break free any layered gunk and blew it off with air. -Next, once the insulator, module (and spark ring if chosen to) and stator are all reinstalled and screws all snugged up, carefully put the cleaned flywheel back on, install the flywheel bolt with a tiny tad of anti-seize on it and use the pry bar again in the flywheel fins but with the handle on top of the foot rest and use the 5/8" socket, extension and 1/2" torque wrench set to 55lbs and tighten up the bolt. At this point, go ahead and reinstall the Shroud making sure that the fuel pumps vacuum line is accessible through the front hole in the shroud, along with the shroud bolts, coil, coil wires (spark, condenser, module and switch) and tighten rear shroud bolt. NOTE: Yellow Switch wire, red module wire and black condenser wires all go on the Positive coil terminal (7mm nut) which should be on the right side of the coil. Only the black module wire goes on the left terminal. Connect the throttle to Gov arm spring, throttle cable, install the fuel pump vacuum line again and replace mount screws. - Lastly, re-install the filter tray, remove the paper towel from the carb, along with installing the air cleaner, pre-filter and clean cap and shroud to filter tray pipe. Then connect the battery and turn the fuel back on. This should get you going again. I think that I got everything but please feel free to comment on anything that I missed as far as documenting the steps or ask any questions about the process. Hope this helps you see that it's not that bad of process to replace the ignition module (And spark ring if needed as some recommend replacing the module , ring and coil all at the same time). I had to first remove this module from a P220G that was on my bench and awaiting repairs but the whole process took me a few hours. A good Saturday Morning task to be up and running by the afternoon for some work before the heat hits. I also ran the tractor for well over and hour after install to insure all was well. I went from a warm up process of idling and then a lap around my property. Did that a few times while repairing a cutting deck and then installed the cutting deck and mowed the lawn. No issues. Ran great! Take Care and God Bless! Andrew C.
  4. Don66

    K321 won't start

    I have a 1978 Wheel Horse 8 speed tractor,Kohler 321 engine. I've been working on restoration, finally got the mower deck finished and installed. Before this, the engine was easy to start and ran well. Yesterday it would not start with ignition key, would not even turn over, so I jumped it with a screwdriver between cylinoid and battery. The engine started and ran about 10 seconds and died. Now I get no spark and the engine won't fire off. I checked the wiring and everything seems to be connected and without damage. I don't have test equipment available so I'm stumped at what went wrong. Any suggestions?
  5. mmmmmdonuts

    K301 Points Push Rod Not Moving

    I was snowblowing the other day and got about half way through my driveway and all of a sudden my tractor died and I could not get it restarted. The first thing I noticed when it died was that the battery went down rapidly to about 7V but I think that had to do with my external alternator hooked up and not spinning but I could be wrong. I got the tractor back in the shed and could not get it turned over at all. The starter spins and everything seemed to move freely but I was not getting a spark. Changed the spark plug yesterday because it looked pretty gummed up and still nothing. This morning I was diving into the electrical system and got to the points where I was going to reset the timing and I realized that the points plunger does not move when I rotate the flywheel by hand. I guess at this point I don't entirely know what I have to do. Is it an easy/worth it fix or does the whole engine need to come apart? Can I change it to a different type of ignition system? Any other thoughts to try? Repower? Thanks, Bob
  6. Hello, My first Wheel Horse project and new to this form. Any help would be greatly appreciated. I purchased older farm house and this gem was negotiated as part of the deal. I believe I have a ~1962/1963 Rounded hood Wheel Horse with Tecumseh engine. Can anyone determine the model / Year? Got this running with new carbonator and basic tune-up, but now not getting any spark. I am not sure how the points/elec ignition is supposed to work but not getting any voltage reading (.02V) when cranking. Fuse is good, but not sure about resister/capacitors. Seems like maybe coil within flywheel could bad, but not sure how to get the fly wheel off to check this further. Anyone have seen similar issue that would help me troubleshoot further? I'm thinking of putting in a replacement engine if anyone could send me info related to what would work for a replacement? Serial Number below dash is 62-12492 There are two tags on the engine Tag above starter (SBH-169C 4313F) Tag on front of engine (SBH-169B 2133F) Thanks Dan
  7. Muddyfeet

    Kt17 series II no spark

    BeOk first off I have a older 80 400 series . Was my father's and I am attached to the old lady.. it Was running ok.. This year after a year outside it just will not start. I am Not a mechanic so working blind. I have the seat switch bypassed, also the PTO saftey switch. Replaced a lot of little parts,.Don't know if there is something else . so.. history aside.. cranks no start.. using a test light.love my test light.. fixed a lot on some older engines with this.. anyway. Test light not meter. I get power to the points. Power. To the + end of the coil.. a flashing on the neg side of the coil when cranking.. I do get power after cranking on the neg end of the coil.. the two posts not where the spark plugs wires come out.. I do see A white spark seen and heard at the points when cranking and if I pull the points apart when not cranking .. using test light or inline spark plugs test nothing. have not done the pull plug and ground to see.. but using test light I put in on the cable no light.. no light on the coil tower either.. I replaced the coil, condensor and points like 8 years ago I think.. it was hard to start and I was using the manual.. So no spark if power to the coil but nothing out equals bad coil right?? Well the local shops quote for 280 for a coil was a shock. . but looked online hard to find but a little less.. Cannot rember what I spent before.. So worth buying a coil and if so may as well replace points and condensor at same time?? Am I missing something?? Got power going into this and nothing out as I can see.. but heck what to I know..
  8. BuddyL

    '73 C12 no spark

    Someone help refresh my memory. Not getting any spark at the spark plug or points. Have power to coil and to points with ignition on. Not getting spark at the contacts on the points. Do I have a condenser, points or coil issue?
  9. Recently my C121 decided it didn't want to start and I've been trying to figure out the reason (s). When I turn the key I get nothing, No click, No sound at all. The old solenoid had been broken at the mounting plate and was brazed back together long ago and it was cracking at the brazed area. I assumed (yeah, I know) that the solenoid was the problem and took the old one to the parts store and got a replacement and it worked for a few days. Now I'm back to no click, No lights, Nothing. To make things just a little more peachy, My multi-meter bit the dust as soon as I started trying to track down the problem. Ordered another one but in the meantime looking for a clue. So, What I know so far is this- New battery, Fully charged. Terminals clean, Ground points on tractor cleaned. Replaced crusty negative battery cable. If I run a jumper wire from the positive battery post to the positive side bolt on the solenoid, I get nothing. If I run that jumper wire to the outgoing (to starter) bolt on the solenoid the starter spins but the tractor doesn't start. Lights do not come on. If I run the jumper wire from positive battery post to the + post on the coil the lights come on with the key turned to the first position but go out when I turn it all the way to the start position. I am not a mechanic or electrician by any stretch of the imagination but I'd like to see if any of you wheelhorse doctors have any advice on what might possibly be the problem? Ignition switch? Bum Chinese made solenoid? Any help is appreciated.
  10. Dhymers

    G14 no spark

    Good day, I recently bought a 73 G14 garden tractor with the HH140 Tecumseh that had been sitting for almost 2 years. After I did a complete fluid change and charged the battery without any success of starting I discovered it had no spark. Searching the net I found some trouble shooting info and I am at a loss right now, but think it is my stator that requires to be changed. Can someone help with confirming this or maybe I am missing something. I did a few readings which I think confirms that the coil is good: Ground to spark plug wire was 5.23K omhs the wire clip (for the wire to the stator) to ground was 2.3M ohms spark plug wire to clip was 2.3M ohms Ground to the wire from the stator was .5K ohms (disconnected from coil) Voltage on that stator wire when turning over was 36.1VAC and then I cleaned it and now is 48.1VAC ( I believe it has to be at least 55VAC) Thoughts?? Thanks! David
  11. ztnoo

    K341 With No Fire In The Hole

    Went to start up my GT 14 equipped with a 16 hp K341 yesterday afternoon. The starter spins like there's no tomorrow, but I've got no spark to the spark plug, so the engine's not firing. Tractor lights are working fine. I have been doing random work on the tractor and may have bumped or dislodged an electrical connection. The engine started fine last fall and has always started without problems. I'm the likely culprit here, but I'm not quite sure where to begin tracing the problem. Any suggestions as to the most likely place to first look to locate the reason I have no spark???
  12. A year and a half ago my gt 14 started to run bad, low power output. Then it quit running as a pulled a load of wood and I couldn't start it again. When I trouble shot the tractor the electronic box was pretty corroded. Then a wire came off. So I replaced the box. I've drained the gas rebuilt the carb and It fired off maybe three or four sparks. Now, I get nothing. I haven't been able to find the coil that is triangular. This kohler doesn't have any points. My question is could it be something else? Any ideas welcomed.
  13. I have a 1996 520H. I replaced the charging regulator about a month ago and has ran fine until this week. I have replaced the relays also, but not with genuine replacment parts. The wiring harness is a bit of a mess as someone has moved 2 of the fuses from the crap fuse holder. I let it set for a week, and no spark! turns over fine, one relay kicks in on run, another on start, cant tell about the third. The coil doesnt show any physical damage, however the new regulator is already cracking a little. oh, and the oil light is blinking. seems odd that no spark after sitting, even though everything else brakes after you turn it off. Im not sure where to start?
  14. Fundir_1

    Kv181

    I have a 1969 wheel horse charger v8 lawn tractor. It has the kv181 motor. The motor ran when i bought it, and ran one other time before it lost its spark. I have replaced the coil block and still no spark. I took it to a small engine mechanic and he said he never seen this motor before. I have been doing research and realize this isnt a popular motor to find any parts. Is there any way to rewire for a different coil, or how can i go about getting spark?
  15. WHEEL HORSE BILL

    C-101 no spark and getting (MAD)

    Hi guys i have a c-101 with no spark I changed the coil,points reset to .20 and also canged the condencer nothing no spark. what else can I change or do.I bought it with a this problem but still can't figure it out.
×
×
  • Create New...