Jump to content

WH nut

Members
  • Content Count

    1,773
  • Joined

  • Last visited

  • Days Won

    3

WH nut last won the day on January 15 2016

WH nut had the most liked content!

Community Reputation

546 Excellent

About WH nut

  • Rank
    Senior Advanced Member
  • Birthday 08/23/1960

Wheel Horse Information

  • tractors
    520H, C145, C85, 310-8, 704, 1075, 3 B80s, Raider 12. 312-8 no name 8
  • favoritemodel
    704

Profile Information

  • Military Member
    Air_Force
  • Location
    Burlington Michigan
  • Occupation
    Retired Air Force.

Recent Profile Visitors

1,779 profile views
  1. WH nut

    520H Onan P220G problem

    Check the fuel shut off at the tank. There is a fine screen on the inside that can plug up.
  2. WH nut

    How To Start p220 Onan Off WH

    Yes use jumpers like you are jumping a car. Neg to ground Pos. to the the battery wire on starter. Take another jumper wire to the + one the coil. Use a screw driver or jumper wire from the battery wire on starter to the small terminal on solenoid to spin the starter.
  3. WH nut

    1 bottom plow

    A plow is a plow
  4. WH nut

    How To Start p220 Onan Off WH

    Just jump 12 volts the the+ side of the coil off jumper cables, ground the motor and the + side of the cable to the large stud on starter and and jump solenoid.
  5. WH nut

    New to tractors . Need advice

    I blow it wet
  6. WH nut

    New to tractors . Need advice

    Why push when you can blow
  7. WH nut

    Best Head Gasket For Kohler?

    I get my parts from the small engine warehouse
  8. WH nut

    New to tractors . Need advice

    And 8hp will do just fine as long as you arent trying to move 2ft of wet snow. He is in NJ, I think snow stays around along while.
  9. WH nut

    New to tractors . Need advice

    I agree, for a short drive. With 400ft to push back he is going to have to start out 50ft wide.
  10. WH nut

    New to tractors . Need advice

    I would suggest a snow blower. 400ft is a lot of snow to push back.
  11. WH nut

    K181 will crank but not fire

    Top one is the high speed jet
  12. WH nut

    K181 will crank but not fire

    By reading through the whole post, you were all over the place so I though by starting at the beginning would prove better results.
  13. WH nut

    K181 will crank but not fire

    This isnt my first rodeo, I have been working on these machines for 45 years. Glad you got it running.
  14. WH nut

    K181 will crank but not fire

    Set you points at .018 and check for spark You seem to be running around the block here. If you have spark try starting fluid. and report back
  15. WH nut

    K181 will crank but not fire

    You are making to way to complicated. Squirt some starting fluid into the carb while cranking. It should start. If not you have a problem with the ignition system. Start there and lets walk you through it. One step at a time
×