Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

212 Excellent

1 Follower

About Desko

  • Rank
    Small Engine Mechanic
  • Birthday 09/03/1998

Wheel Horse Information

  • tractors
    Wheel Horse D160 (Dads) Work Horse lt-1637 (gone) Work Horse GT-1142 Wheel Horse 416H
  • favoritemodel

Profile Information

  • Location
    McClellandtown PA
  • Occupation
    Diesel Mechanic
  • Interests
    Engine Rebuilds Wheel Horse

Recent Profile Visitors

1,548 profile views
  1. Started a little paint work on my work horse resto with a twin onan and 8 pinion rear diff
  2. Desko

    Onan parts

    Post have been edited check it out!
  3. Desko

    Onan parts

    Everything will have to wait! I'm currently in the hospital after a collapsed lung and surgery to fix the bleeding and take part of my lung. Its all over expect for recovery. Don't think I'm ignoring anyone anything
  4. Desko

    Onan parts

    Mine are all the same aside from 16-20hp but how about $60 obo
  5. Desko

    Onan parts

    Any muffler off a wheel Horse with an onan will work. But the number of tabs is different. A 520 has 6 for the chrome shield where say a 416 would have 4 if it doesn't have the chrome shield
  6. Desko

    Onan parts

    The muffler is pending. Heres some other parts I have. They're dirty but in good shape. The muffler with the chrome heat shield I'm keeping for my restoration gt1142 that I'm putting an onan in.
  7. Desko

    Onan parts

  8. Desko

    Onan parts

    I do have both. I have one nos muffler a used one and a couple carbs. The carbs may need rebuilt but they're in good shape.
  9. Desko

    Onan parts

    No sorry I do not just onan parts
  10. Desko

    Onan parts

    I have alot of onan parts that I would like to get rid of they all came from wheel horses. I have several sets of heads, timing covers, bearing plates, starters, carbs, one exhaust that is brand new for a 416-520 and alot of other misc parts like cams a crank nuts and bolts etc! Comments or message what you need and I'll see what I have! Heads $35 a set good threads Carbs $30 +5 if you want manifold Rear bearing plates $15 Oil pans $40 Starter $40 with bolts Cam $50 Pistons $20 a set Block needs bored $100 Have new .020 pistons for block $100 Valves and springs $20 a set or $5 a valve they're 5/16 stems. Thanks!
  11. Desko

    D 200 rebuild kit

    Like they say anything is possible with a good torch and a welder! Maybe one day if I find a beat D series I'll try and put an 8 speed into it
  12. Desko

    D 200 rebuild kit

    Enough to see what that sunstrand hydro will take lol I always thought of putting a eaton 1100 out of a 5xi series being its shaft driven into a D series if at all possible. Or an 8 speed into a 1/1 drop box back to a right hand gear box to the pully.
  13. Desko

    My New Horse

    Thats a very cool tractor and clean looking! A few years back I picked up a 416h 1994 model with 43 original hours for $200 my issue was the PO scattered the onan so a new onan in place with 120 hours later it's been great!
  14. Desko

    D 200 rebuild kit

    I found these on ebay and I think even for them rods thats nuts but they're ment for high rpm pullers lol
  15. Desko

    Thinking about 520H Repower

    The repower in my opinion isn't worth it. You can have your onan rebuilt for right around $1,200 with all new oem parts not including machine work but are here its $70 to bore them and $25 to cut and grind the valves and seats which imho isn't bad for a smooth running engine. I've seen them go to 5,000 hours in welder gen sets running WOT. Keep the screen clean and blow out the fins with an air gun when you're done they'll go forever. Glad you got her fixed though and she's running good!