Jump to content

Electrical

All electrical guides

115 files

  1. Free

    Switch Pto Safety 1972-1975.pdf

    Power Take Off switch from 1975 C-160 Automatic operator manual
     
    101845 Ball switch NO=Normally open 
    Used on 1975 early C-160-Series (Late models use 104680 push button switch) 

    1 download

    Updated

  2. Free

    Switch Pto Safety 1978-1983 .jpg

    Power Take Off switches taken from #492-4207 Electrical Service Manual
     
    107072 Push button switch NO=Normally open - Black bottom (This switch not named correctly for this application/year @ Toro)
    Used on
    1980-1981 A-Series with electric start
    1982 models A-81E and A-111
    1982 RR-832
     
    109329 Push button switch NC=Normally closed - White bottom
    Used on
    1982 A-51 with recoil start
    1982 RR-532 with recoil star
     
    109327 replaced by 98-2392 Rocker switch (Wide terminals are NO=Normally open) (Narrow terminals are NC=Normally closed) - White
    Used on
    1983 A-Series
    1982-1983 B-Series
    1982-1983 LT-Series and GT-Series
     
    104680 Push button switch NO=Normally open
    Photo of wiring connector supplied by hondagod64
    Used on
    1980-1981 B-Series
    1975 Late C-160-Series (Early models use 101845 ball switch)
    1975-1981 C-Series
     
    106268 Push button switch NO=Normally open
    Used on
    1982-1983 C-Series

    18 downloads

    Updated

  3. Free

    Switch Neutral & clutch pedal .jpg

    Clutch pedal and neutral switches taken from #492-4207 Electrical Service Manual
     
    103480 Rocker switch NO=Normally open
    Used on
    1981 B-Series
    1982-1983 B-Series and C-Series
    1990 312-8
     
    105877 replaced by 38-0430 Ball switch NO=Normally open
    Used on
    1978 C-Series 8-Speed models
    1979 C-Series 8-Speed models
    1980 C-Series 8-Speed models
    1981 C-Series 8-Speed models
    Plastic 2-wire connector less terminals 106024
     
    107635 Push button switch with wire leads NO=Normally open (106768 switch replaced by 107635)
    Used on
    1981 C-Series Automatic models

    12 downloads

    Updated

  4. Free

    Relay 106833 replaced by 99-5365 kit

    Taken from #492-4207 and #492-4509 Electrical manuals and PSB's
    1 page 64KB
     
    Used as a kill relay on 1981 B-Series tractors with magneto ignition. The battery style ignition switch controls the relay to ground the magneto ignition.
    Starting in 1986 used in the low-oil starter circuit for single-cylinder Kohler engines.
     
    106833 3-terminal relay replaced by a 5 terminal substitute in production because of a parts shortage.
    These were replaced by SA121378 service assembly which was replaced by 99-5365 kit.
    The 99-5365 kit contained a 48-4700 relay which has been replaced by 116397 relay.
    116397 relay used on 1990 312-8 for the low oil starter circuit and 1990 520-H as a starter relay.
     
    Links to service bulletins
     
     
     

    4 downloads

    Updated

  5. Free

    Gauge Fuel 1991-2003 description .jpg

    Taken from #492-4761 Electrical manual
    Gage Fuel 2002-2003 description
     
    Fuel gauge (dash unit) 78-0040 replaced by 95-3830
     
    78-0040 used on 1991 model 520-H
    95-3830 used on 2002 522xi model 73561

    10 downloads

    Updated

  6. Free

    Switch Ignition Magneto 116338 .jpg

    1 page 163KB from Demystification Guide #492-4509
     
    1 page 161KB from Demystification Guide #492-3203
     
    How to troubleshoot
    Note on the switch description page - The switch terminals may not be properly identified.
     
    116338 switch
    5-terminal 3-position key switch for magneto ignition
    This switch requires a starter solenoid
    --------------------------------------------------------------------
    Tractor Switch Ignition Magneto ignition with electric start 116338
    (Threads 5/8"-32) 5-terminal 3-position switch
    116338 5-terminal 3-position available 08/08 $23.80 from RCPW
    Used  1991 thru 1997

    6 downloads

    Updated

  7. Free

    Diode with leads Kohler KH10315 .jpg

    Taken from #492-4509 Electrical Manual
     
    KH10315 diode with leads
    1N4002
    Now available from Kohler 47 518 43-S
     
    For 1N4002 diode, the maximum current carrying capacity is 1A it withstand peaks up to 30A. Hence we can use this in circuits that are designed for less than 1A.  The reverse current is 5uA which is negligible. It can withstand reverse voltage peak up to 100V.

    9 downloads

    Updated

  8. Free

    Light Indicator 95-7652.jpg

    Indicator light 95-7652
    There is no file to download
     
    3 used on 2000 model 73449 model 314-8
    Used on other models 1999-2008 and possibly more

    5 downloads

    Updated

  9. Free

    Terminal Packard 56.jpg

    Packard 56 terminals used by Wheel Horse
    There is no file to download
     
    The female terminal can be released from it's plastic holder by collapsing the locking tab using a tool such as a 3/32" cotter pin that is opened up. Stick the cotter pin in behind the terminal where the male terminal would enter while holding the wire. That will bend the tab down. Leave the cotter pin there and the wire and terminal should pull out of the plastic holder.
    Use the blade of a knife to bent the tab back up and reinsert into the plastic holder. Don't flip it over. It will only lock in with the tab facing the same direction.

    13 downloads

    Updated

  10. Free

    Fuse Blade.jpg

    Blade fuses
    There is no file to download
     
    ATO type = Open fuse element subject to corrosion
    ATC type - Closed fuse element to reduce corrosion
     
    5 amp 110928 - Tan
    10 amp 114594 and 218-578 - Red
    15 amp 109355 - Blue
    20 amp 109101 - Yellow
    25 amp 109102 - Clear
    30 amp NN10277 and 109103 - Green
     

    5 downloads

    Updated

  11. Free

    Fuse Glass.jpg

    Glass fuses
    There is no file to download
     
    6 amp 29561
    20 amp 9435 replaced by 101639 - SFE20
     
     
     

    6 downloads

    Updated

  12. Free

    Switch Ignition Battery Early

    Battery ignition switch with electric starter/generator 1747
    (Threads 5/8"-32) 2-terminal 2-position switch using 3668 2-prong key
    1747 2-terminal 2-position nla
    1961 thru 1965, 1961 701, 1962 702
      Tractor Switch IgnitionMagneto ignition with recoil star

    36 downloads

    Updated

  13. Free

    Switch Ignition Battery 4988 replaced by 7263 .jpg

    Battery ignition switch with electric starter/generator 4988 (Threads 5/8"-32) 3-terminal 3-position used 1964-1967
    4988 3-terminal 3-position switch replaced by 7263
    Used 1964 thru 1967 and Early 1968 Charger 12 and Raider 12 with Kohler engine
    ---------------------------------------------------------------------------------------------------------------------------------------------------------
    Battery ignition switch with electric starter/generator 7263
    (Threads 9/16"-24)
    3-terminal 3-position 
    Replaces 4988
    7263 3-terminal 3-position available 06/08 $32.04 from RCPW
    7263 3-terminal 3-position available 06/17 $60.18 from RCPW
    Used  1967 1968
     
    Mid year change - Early production has battery ignition using 7263 switch
    1968 Charger 12 model 1-7231 Early production
    1968 Raider 12 model 1-6231 Early production
     
    The original parts list for the 1968 Commando 8 model 1-4831 list a 7262 ignition switch but that is the part number for the key (typo). Switch is 7263.
      Tractor Switch IgnitionMagneto ignition with recoil star

    27 downloads

    Updated

  14. Free

    Switch Ignition Battery 101917 replaced by 92-6785 .jpg

    2 pages from Demystification Guide #492-4761
     
    How to troubleshoot
     
    101917 switch replaced by 92-6785
    5-terminal 4-position key switch
    This switch requires a starter solenoid
    -------------------------------------------------------------------------------------------------------------------------------------------
    Tractor Switch Ignition Battery ignition with electric start 101917
    (Threads 5/8"-32) 5-terminal 4-position used 1972-1974
    (PSB #134?) List with 1970 1-8755 Lawn Ranger at Toro but D-Series mix-up
    101917 5-terminal 4-position replaced by 92-6785
    --------------------------------------------------------------------------------------------------------------
    Tractor Switch Ignition Battery ignition with electric start 92-6785
    (Threads ? Retained by 700919 nut) 5-terminal 4-position used 1994-2007
    Replaces 101917 5-terminal 4-position
    92-6785 5-terminal 4-position available 06/08 $31.47 from RCPW
     
    Also used on magneto ignition to control a kill relay.
     
    Switch 101917 used on
    1972 Bronco 14 model 1-0422
    1972 Bronco 14 model 1-0423
    1972 Charger 10 model 1-0410
    1972 Charger 12 model 1-0401
    1972 Commando 800 4-Speed model 1-0110
    1972 Raider 8 model 1-0330
    1972 Raider 10 model 1-0301
    1972 Raider 12 model 1-0311 (This model also made in Belgium)
    1972 Raider 14 model 1-0320
    1973 8hp 4-Speed model 1-0120 - Horizontal shaft (Also made in Belgium as Commando 800)
    1973 8hp 4-Speed model 1-0130 - Horizontal shaft - Commando 800?
    1973 8hp 8-Speed model 1-0370 - Horizontal shaft
    1973 10hp 8-Speed model 1-0360 ??????????????
    1973 10hp 8-Speed model 1-0365
    1973 12hp 8-Speed model 1-0350 ??????????
    1973 12hp 8-Speed model 1-0353 - Listed in PSB #301E for 1973-74. Suspect 1973 is wrong ?????????
    1973 12hp 8-Speed model 1-0354 - Listed in PSB #301E for 1973-74. Suspect 1973 is wrong ?????????
    1973 12hp 8-Speed model 1-0355 - One made in Belgium and located in Wales
    1973 14hp 8-Speed model 1-0340
    1973 18hp Automatic model 1-0600
    1973 18hp Automatic model 1-0601
    1973 18hp Automatic model 1-0610
    1973 18hp Automatic model 1-0620
    1973 Raider 10 8-Speed model 1-0360 - Made in Belgium
    1973 Raider 12 8-Speed model 1-0350 - Made in Belgium
    1974 Raider 10 4-Speed model 1-0393 ????????????????? - May not be correct
     
    Switch 92-6785 used on
    72042, 264-6 Yard Tractor, 1994 (SN 4900001-4999999)
    72043, 264-H Yard Tractor, 1994 (SN 4900001-4999999)
    72062, 264-6 Yard Tractor, 1994 (SN 4900001-4999999)
    72063, 264-H Yard Tractor, 1994 (SN 4900001-4999999)
    72083, 266-H Yard Tractor, 1994 (SN 4900001-4999999)
    72103, 268-H Yard Tractor, 1994 (SN 4900001-4999999)
    72042, 264-6 Yard Tractor, 1995 (SN 5900001-5900796)
    72042, 264-6 Yard Tractor, 1995 (SN 5900797-5999999)
    72043, 264-H Yard Tractor, 1995 (SN 5900001-5901475)
    72043, 264-H Yard Tractor, 1995 (SN 5901476-5999999)
    72062, 264-6 Yard Tractor, 1995 (SN 5900001-5900227)
    72062, 264-6 Yard Tractor, 1995 (SN 5900228-5999999)
    72063, 264-H Yard Tractor, 1995 (SN 5900001-5900498)
    72063, 264-H Yard Tractor, 1995 (SN 5900499-5999999)
    72084, 266-H Yard Tractor, 1995 (SN 5900001-5999999)
    72103, 268-H Yard Tractor, 1995 (SN 5900001-5900600)
    72103, 268-H Yard Tractor, 1995 (SN 5900601-5999999)

    147 downloads

    Updated

  15. Free

    Switch Ignition Magneto 111215 replaced by 103991 .jpg

    1 page 176KB  from Demystification Guide #492-4509
     
    111215 ignition switch replaced by 103991
     
    5-terminal 3-position ignition switch for magneto ignition.  There may be a 6th terminal to ground the body of the switch.
    ----------------------------------------------------------------------
    Tractor Switch Ignition Magneto ignition with electric start 111215
    (Threads 5/8"-32) 5-terminal 3-position used 1986-1993
    111215 5-terminal 3-position replaced by 103991
    --------------------------------------------------------------------------------------------------------
    Tractor Switch Ignition Magneto ignition with electric start 103991
    (Threads 5/8"-32) 6-terminal 3-position
    Used 1974-1980 1982-1985 and 1987
    Replaces 111215 5-terminal 3-position
    -----------------------------------------------------------------------------------------------------
    Napa and Prime-Line replacement switch 7-01893 (9/16" mounting stem)
    Stens replacement switch 430-128 (9/16" mounting stem)
    Rotary replacement switch 31-7280 (9/16" mounting stem)
     
    Napa and Prime-Line 5-terminal connector body that uses Packard female spade terminals 7-016034 (With terminals and wire leads 7-01910)
    Stens 5-terminal connector body that uses Packard female spade terminals 430-206 (With terminals and wire leads 430-223)
    Rotary 5-terminal connector body with terminals and wire leads 31-6662

    46 downloads

    Updated

  16. Free

    Switch Ignition Battery 111216 replaced by 103990 .jpg

    1 page from Demystification Guide #492-4509
     
    How to troubleshoot
     
    111216 switch replaced by 103990
    5-terminal 3-position key switch for battery ignition
    This switch requires a starter solenoid
    ----------------------------------------------------
    Tractor Switch Ignition Battery ignition with electric start 111216
    (Threads 5/8"-32) 5-terminal 3-position (B-R-I-A-S)
    Used 1986 and 1988-1997
    111216 5-terminal 3-position replaced by 103990
    ------------------------------------------------------------------
    Tractor Switch Ignition Battery ignition with electric start 103990
    (Threads 5/8"-32) 5-terminal 3-position (B-R-A-I-S)
    Used 1974-1985 and 1992-1995
    Replaces 111216 5-terminal 3-position
    103990 5-terminal 3-position available 06/08 $15.61 from RCPW
    ----------------------------------------------------------------------------
     
    Napa and Prime-Line replacement switch 7-01892 (9/16" mounting stem)
    Stens replacement switch 430-512 (9/16" mounting stem)
    Rotary replacement switch 31-1931 (9/16" mounting stem)
     
    Napa and Prime-Line 5-terminal connector body that uses Packard female spade terminals 7-016034 (With terminals and wire leads 7-01910)
    Stens 5-terminal connector body that uses Packard female spade terminals 430-206 (With terminals and wire leads 430-223)
    Rotary 5-terminal connector body with terminals and wire leads 31-6662

    39 downloads

    Updated

  17. Free

    Switch Ignition Magneto 63-5630 replaced by 23-0660 .jpg

    1 page 166KB from Demystification Guide #492-4509
     
    How to troubleshoot
     
    23-0660 switch for magneto ignition
    5-terminal 3-position key switch
    This switch requires a starter solenoid
    ----------------------------------------------------------
    Tractor Switch Ignition Magneto ignition with electric start 23-0660
    (Threads 5/8"-32) 5-terminal switch replaces 63-5630
    23-0660 5-terminal available 08/08 $23.53 from RCPW Stens replacement 430-538
    Used 1974 thru 2007

    5 downloads

    Updated

  18. Free

    Switch Ignition Magneto 4987 replaced by 7572 replaced by 101482 .jpg

    Illustration from PSB #134A
     
    Tractor Switch Ignition Magneto ignition with electric start or starter/generator 4987
    (Threads 5/8"-32) 3-terminal 3-position used 1964-1967
    4987 3-terminal 3-position replaced by 7572 replaced by 101482
    PSB #69 32E 34E 654 L-155 655 L-156 656 RE-65 RE-66
    -----------------------------------------------------------------------------------------------------------------------
    Tractor Switch Ignition Magneto ignition with electric starter or starter/generator 7572
    (Threads 9/16"-24) 3-terminal 3-position B-M-S used 1968-1970
    7572 3-terminal 3-position B-M-S replaced by 101482
     
    Mid year change - Late production has magneto ignition using 7572 switch
    1968 Charger 12 model 1-7231 Late production
    1968 Raider 12 model 1-6231 Late production
    ---------------------------------------------------------------------------------------------------------------------
    Tractor Switch Ignition Magneto ignition with electric start or starter/generator 101482
    (Threads 9/16"-24) 3-terminal 3-position used 1971-1975
    Replaces 4987 and 7572 3-terminal 3-position (PSB #134?)
     

    10 downloads

    Updated

  19. Free

    Switch Ignition Magneto 8362 .jpg

    Illustration from PSB #134A
     
    Tractor Switch Ignition Magneto ignition with electric start 8362
    (Threads 9/16"-24) 5-terminal 4-position (L-B-M-S-R)
    #6 gauge wire to battery and starter
    This switch released to fit all 1968 10hp and 12hp tractors with 10 amp stators
     
    Magneto ignition HD electric start without solenoid
     
    8362 switch used on
    1969 Charger 10 model 1-7041
    1969 Charger 12 model 1-7241
    1969 Electro 12 model 1-7245
    1969 Raider 10 model 1-6041
    1970 Charger 12 model 1-7251
    1970 Charger 12 model 1-7252
    1970 Charger 12 model 1-7253
    1970 Electro 12 model 1-7255
    1970 Raider 10 model 1-6051
    1970 Raider 12 model 1-6251
    1970 Raider 12 model 1-6252
    1970 Raider 12 model 1-6253
    1971 Bronco 14 model 1-0420
    1971 Bronco 14 model 1-0421
    1971 Charger 12 model 1-0400 - Uses Kohler K301S-47407C with breakerless magneto ignition
    1971 GT-14 model 1-0500
    1971 GT-14 model 1-0501
    1971 Raider 10 model 1-0300 - Uses Tecumseh HH100-115145C
    1971 Raider 12 model 1-0310 - Uses Kohler K301S-47407C with breakerless magneto ignition
    1972 Charger 12 model 1-0402 - Uses Kohler K301S-47407C with breakerless magneto ignition

    16 downloads

    Updated

  20. Free

    Switch Ignition Battery 101876 .jpg

    Illustration from PSB #134A
     
    101876 switch used on
    1972 GT-14 Automatic model 1-0502
    1972 GT-14 Automatic model 1-0503
    1973 GT-14 Automatic model 1-0502-8 - Listed in attachment interchange
    Not listed at Toro
    Discontinued June 10, 2014

    92-6785 should be a suitable replacement ignition switch if used with a starter solenoid

    7 downloads

    Updated

  21. Free

    Switch Ignition Magneto 102981 .pdf

    Magneto ignition with electric start 102981 switch used on 2-0230
    (Threads 5/8"-32 switch)
    5-terminal 3-position
    Used on the model 2-0230 only. Switch listed in 1969-73 Lawn Ranger ipl
    Switch also listed for the Dixie Chopper which is where the diagram came from. Diagram included to show how switch was used.
    102981 used 1970-1973 and 1985-1987
     
    Magneto ignition with recoil start 102820 switch used on 2-0220
    (Threads 5/8"-32)
    1 or 2-terminal 2-position
    No illustration available
    Used  1970-1977 and 1979
     
     

    5 downloads

    Updated

  22. Free

    Switch Ignition Magneto 117292 .jpg

    1 page from #492-4509 Demystification Guide
     
    6-terminal 3-position for magneto ignition.
    Used on the 600-Series zero turn models with battery ignition by using the A terminal to power the ignition. The M and G terminals are not used.

    0 downloads

    Updated

  23. Free

    Switch Ignition Battery 88-9830 replaced by 104-2541 .jpg

    88-9830 replaced by 104-2541
    6-terminal 3-position for battery ignition
    Used on the XL-Series tractors and Time Cutter zero turn models
      Tractor Switch IgnitionMagneto ignition with recoil start 225096

    8 downloads

    Updated

  24. Free

    Switch Ignition Magneto 99-7429 .jpg

    Taken from #492-4761 Electrical Manual
     
    99-7429 ignition switch for magneto ignition

    6 downloads

    Updated

  25. Free

    Solenoid Starter 3657 3-terminal .jpg

    Photo only
    3657 starter solenoid
     
    3-terminal with insulated base. Notice the battery cable stud is identified. That is because the magnetic coil is powered by the battery stud internally. The 3656 3-terminal ignition switch for magneto ignition and electric start grounds the small terminal to activate the solenoid on the 551.
     
    A suitable replacement would be a 4-terminal solenoid with an insulated base with a jumper from the battery cable stud to one of the small coil terminals. The other small terminal is grounded be the ignition switch to activate the solenoid on the 551 and a push-button switch on the 701.
     
    Used on
    1961 model 551
    1961 model 701
     

    21 downloads

    Updated



×