Jump to content

Misc. Items

Calendars and more

65 files

  1. Free

    Spring Extension 1014 & 1486 replaced by 83-2730.jpg

    By gwest_ca-(File Mod)

    Found the 83-2730 spring replaced 1486 that was used as a pair on the early Lawn Ranger mower deck clutch. Photo appears to have 50 + 2 half coils
    It may have also replaced 1014
    Still available from Toro 05-06-18
     
    1014 spring used as a clutch pedal return spring now replaced by 108035 does not look correct - too long
     
    4-1/2" between hooks
    .070" wire
    .520" coil OD
    .380" coil ID
    3.570" coil length
    52 + 2 half coils

    63 downloads

    Updated

  2. Free

    Spring Clutch spring on Uni-Drive.pdf

    By gwest_ca-(File Mod)

    Picture of clutch spring mounted
    1 page 107KB
     
    Recording picture
    9111 extension spring replaced by 107677

    85 downloads

    Updated

  3. Free

    Filter Air.jpg

    By gwest_ca-(File Mod)

    Air filter
    There is no file to download
    The online Kohler sites show most air filters discontinued.
    They still have them under new numbers but no record of what the numbers changed to.
    Some now include the pre-filter which is likely what forced the number change.
     
    4" L x 2-1/2" W x 3" HT
    Briggs & Stratton 4224, 692446
    Toro/Wheel Horse 98-9212
    Napa 7-08392
    Stens 100-591, 100-871
    Stens pre-filter 100-592
     
    4-1/8" L x 3-1/8" ID x 2-1/4" W x 3-3/4" HT (Oval)
    Onan 1402331, 1402535, 1402588, 1403111
    Toro/Wheel Horse NN10872
    Napa 7-02717
    Stens 100-061
    Stens pre-filter 100-077
     
    4-3/8" OD x 3" ID x 1-1/2" HT
    Clinton 005023300
    Kohler 230840, 230840-S
    Tecumseh 30804
    Napa 7-02202
    Stens 100-024
    Stens pre-filter 102-343 listed for Clinton only
    Wix 42372
     
    4-3/8" OD x 3" ID x 2-3/8" HT
    Kohler 231847, 231847-S, 2588301-S1
    Onan 1401188
    Tecumseh 31925
    Napa 7-02203
    Stens 100-032
    Wix 42374
     
    4-1/2" L x 2-7/8" W x 2-1/4" HT (Oval)
    Tecumseh 33268
    Napa 7-02232
    Stens 100-115, 056-022
    Wix 42361
     
    4-1/2" OD x 3-1/8" ID x 4-1/4" HT
    Kohler 2808304, 2808304-S (Fuel pump at Stens is wrong)
    Napa 7-08363
    Stens 100-989
    Wix 49304
     
    6" OD x 4-5/8" ID x 1-7/8" HT
    Kohler 235116, 235116-S, 235116-S1 with pre-filter replaced by 2588303-S1
    Kohler pre-filter 4108304-S1 replaced by 4108304-S
    Tecumseh 32008
    Toro/Wheel Horse KH10060
    Toro/Wheel Horse pre-filter KH10178
    Napa 7-02204
    Stens 100-040, 055-009
    Stens with pre-filter 055-433
    Stens pre-filter 100-750
    Wix 42373
     
    6" OD x 4-5/8" ID x 3" HT
    Kohler 4508302, 4508302-S, 4508302-S1 with pre-filter replaced by 4588302-S1 (Used on 16hp)
    Onan 1401216
    Toro/Wheel Horse KH10236
    Toro/Wheel Horse pre-filter KH10235
    Napa 7-02226
    Stens 100-065, 055-017
    Stens with pre-filter 055-421
    Stens pre-filter 100-768
    Wix 42299
     
    6" OD x 4-3/4" ID x 4" HT - Used on 1979 D-200 Auto
    Kohler 277138, 277138-S
    Napa 7-02225
    Stens 100-057
    Wix 42298
     
    6-3/4" L x 5-3/8" W x 1-3/8" HT (Flat)
    Kohler 2008302, 2008302-S replaced by 2008306, 2008306-S, 2088306-S1 with pre-filter
    Toro/Wheel Horse 98018
    Napa 7-083108
    Stens 100-041, 055-301
    Stens with pre-filter 055-441
    Wix 42298
     
    7" L x 2-1/4" W x 2-5/8" HT (Oval)
    Kawasaki 110132021, 11013-2021
    Toro/Wheel Horse KW10017
    Napa 7-02242
    Stens 100-347 (Pre-filter 100-354 included)
    Wix 42430
     
    7" OD x 5-1/2" ID x 1-3/4" HT
    Kohler 4708301, 4708301-S, 4708301-S1 with pre-filter replaced by 4788301-S1
    Kohler Pre-filter 5208301-S
    Napa 7-02235
    Stens 100-107, 055-021
    Stens Pre-filter 102-335
    Wix 42296
     
    7" OD x 5-1/2" ID x 2-1/2" HT
    Kohler 4708303, 4708303-S, with pre-filter 4788303-S1
    Napa 7-02201
    Stens 100-016, 055-025, 801-308
    Stens Pre-filter 100-017
    Wix 42297
     
    7" OD x 5-1/2" ID x 3" HT
    Kohler 2408303, 2408303-S, 2408303-S1 with pre-filter replaced by 2488303-S1
    Napa 7-08302
    Stens 100-030, 100-758, 055-041
    Stens Pre-filter 102-366
    Wix 42444
     
    8-1/8" OD x 6-3/8" ID x 2-1/8" HT
    Onan 1401228, 1402522, 1402628, 140262801
    Toro/Wheel Horse NN10175 replaced by NN10774
    Napa 7-02247
    Stens 100-149
    Stens Pre-filter 100-875
    Wix 46094
     
    8-1/4" OD x 6-3/8" ID x 3-7/8" HT
    Onan 1401911, 1402523, 140262802
    Toro/Wheel Horse NN10180
    Napa 2363
    Stens 102-319
    Stens Pre-filter 102-137
    Wix 42363
     
    9-1/4" L x 6-3/4" W x 1-1/2" HT (Oval)
    Kohler 2808303
    Napa 7-08362
    Stens 100-923, 102-309
     
     

    72 downloads

    Updated

  4. Free

    Haban Manufacturing Products

    By "Manic-Mechanic"

    Various Haban Products and their perspective applications on OPE

    78 downloads

    Submitted

  5. Free

    Loader FEL Plans part1 & 2

    By wallfish

    Basic FEL Plans

    1,316 downloads

    Updated

  6. Free

    Chart Wheel Horse to Woodruff Key.pdf

    By gwest_ca-(File Mod)

    This chart is sorted by Wheel Horse part number to Woodruff key number.
    8 pages 1.04MB
     
    3 pages 200.26KB

    309 downloads

    Updated

  7. Free

    Cover Belt cover Blueprints Factory.pdf

    By Pat_In_Denver

    Going thru some of the old paperwork from my Dad's shop and came across these.
     
    Can't imagine there are too many companies today that would provide this kind of information for an obsolete part to their customers or their distribution channel.  Just goes to show what a great company they were back in the day.
     
    Transmission drive belt guard
    Part Numbers were 4962, 4993, and 5308
     
    Files are in pdf format
     
    4962 fits Lauson powered tractors (Same as 5308 except has 5/16-24 tapped hole in mounting bracket)
    1964 models 604, 654, 34E, 34R
    1965 models L-105, L-155
    1966 models L-106, L-156
    1967 models L-107, L-157
    1968 Lawn Ranger models 1-1631, 1-2631
    1969 WorkHorse 700 models 1-3741, 1-3745, Commando 1-3741 sold in Europe but not on the Belgium list
     
    4993 fits Kohler powered tractors
    1964 models 704, 754, 854
    1965 model 855, 
    1966 models 706, 856
    1967 models 857, 867
    1968 model 1-4831 Commando 8
     
    5308 fits Lauson powered tractors (Same as 4962 except omit 5/16-24 tapped hole in mounting bracket)
    1965 models 605, 655,
    1966 models 606, 656
    1967 models 607, 657
    1968 models 500 Special model 1-3631, Commando 6 model 1-4631
     

    209 downloads

    Updated

  8. Free

    Pulley Idler Flat

    By gwest_ca-(File Mod)

    Banta Saw Stens pulley catalog
    22 pages 1.1MB
     
    Some flat idlers have short flanges on each side of the OD to help keep the belt on the pulley. For some of the following dimensions it is not clear if the OD is the flat diameter or the flange diameter.
     
    Flat idler pulley - 1.875" OD - 1-7/8" - WH 25-5880 or 255880 (Stens 280-487 Std bearing Width 15/16" ID 3/8" No flanges)
     
    Flat idler pulley - 2.000" OD - 2" -  WH 3542 with Nice 7206 bearing - No picture
    Flat idler pulley - 2.000" OD - 2" -  WH 7-0056 or 70056 (Napa 7-05202 with flanges, Rotary 718, Stens 280-016 Std bearing Flat OD 1.875" Width 7/8" Flat width 11/16" ID 3/8" - Stens Std picture
    Flat idler pulley - 2.031" OD - 2-1/32" - WH 7-0056 or 70056 (Napa 7-05202 with flanges, Rotary 718, Stens 280-206 HD bearing Flat OD 1.875" Width 13/16" Flat width 11/16" ID 3/8") - Stens HD picture
    Flat idler pulley - 2.250" OD - 2-1/4" - WH 5942 (Stens 280-479 Std bearing Width 1-1/4" Flat width 3/4" ID 3/8" No flanges) - Stens picture
    Flat idler pulley - 2.469" OD - 2-15/32" - WH 4794 replaced by MW8821 (Napa 7-05203 with flanges, Stens 280-032 Std bearing Flat OD 2.250" Width 3/4" ID 3/8")
    Flat idler pulley - 2.469" OD - 2-15/32" - WH 7-0136 replaced by 3-4244 or 34244 (Napa 7-05203 with flanges, Stens 280-032 Std bearing Flat OD 2.250" Width 3/4" ID 3/8", Rotary 719)
    Flat idler pulley - 2.500" OD - 2-1/2" WH 7-0448 replaced by 12-6700 or 126700 (Stens 280-024 Std bearing Flat OD 2.000" Width 1" Flat width 13/16" ID 3/8") - Stens picture (25-5880 or 255880 and 54-9790 or 549790)
     
    Flat idler pulley - 3.094" OD - 3-3/32" - WH 6719, 112425 and 519537 replaced by 92-7101 or 927101 (Stens 280-222 HD bearing Flat OD 2.750" Width 7/8" ID 3/8" with flanges)
    Flat idler pulley - 3.094" OD - 3-3/32" - WH 105874 replaced by 92-7104 or 927104 May replace 6704 (Stens 280-222 HD bearing Flat OD 2.750" Width 7/8" ID 3/8" with flanges, Napa 7-05205 with flanges)
    Flat idler pulley - 3.187" OD - 3-3/16" - WH 7-4660 replaced by 62-4540 (Napa 7-05434 may work) - No picture
    Flat idler pulley - 3.219" OD - 3-7/32" - WH 51-4810 or 514810 (Stens 280-081 Std Flat OD 3.000" Width 7/8" Flat width 3/4" ID 3/8") No picture
    Flat idler pulley - 3.219" OD - 3-7/32" - WH 51-4810 or 514810 (Stens 280-586 HD bearing Flat OD 3.000" Width 7/8" ID 3/8") No picture
    Flat idler pulley - 3.219" OD - 3-7/32" - WH 2-4463 or 24463, 7434, 112426 replaced by 244-63 (Napa 7-05206 with flanges, Napa 7-05434 with flanges, Rotary 722, Stens 280-081 Std Flat OD 3.000" Width 7/8" Flat width 3/4" ID 3/8") No picture
    Flat idler pulley - 3.219" OD - 3-7/32" - WH 2-4463 or 24463, 7434, 112426 replaced by 244-63 (Napa 7-05206 with flanges, Napa 7-05434 with flanges, Rotary 722, Stens 280-586 HD bearing Flat OD 3.000" Width 7/8" ID 3/8") No picture
    Flat idler pulley - 3.219" OD - 3-7/32" - WH 51-3660 or 513660 (Stens 280-586 HD, Napa 7-05435 with flanges) No picture
    Flat idler pulley - 3.219" OD - 3-7/32" - WH 51-3660 or 513660 (Stens 280-586 HD bearing Flat OD 3.000" Width 7/8" ID 3/8") No picture
    Flat idler pulley - 3.250" OD - 3-1/4" - WH 56-9870 (Napa 7-05429 with flanges) Flat OD 2.750" No picture
    Flat idler pulley - 3.250" OD - 3-1/4" - WH 7437 replaced by 112426 (Stens 280-081 Std Flat OD 3.000", Stens 280-586 HD Flat OD 3.000", Napa 7-05434, Rotary 722)
    Flat idler pulley - 3.500" OD - 3-1/2" - WH 88-5680 replaced by 104-4180 (Napa 7-05430 with flanges) No picture
    Flat idler pulley - 3.500" OD - 3-1/2" - WH 109828 (Stens 280-529 HD Flat OD 2.750", 1-3/8" wide, 3/8" ID) No picture
    Flat idler pulley - 3.563" OD - 3-9/16" - WH 43-1040 (Stens 280-107 Std Flat OD 3.250") No picture
    Flat idler pulley - 3.750" OD - 3-3/4" - WH 6719, 112425, 519567 replaced by 92-7101 (Napa 7-05207 with flanges, Stens 280-099 Std Flat OD 3.250", Stens 280-578 replaced by 280-114 HD Flat OD 3.250") No picture
     
    Flat idler pulley - 4.125" OD - 4-1/8" - WH 101762 and 104144 replaced by WH 104975 (Stens 280-743 Flat OD 3.500" x .750" wide Overall width 1-1/8" ID 3/4" , Oregon 34-039, Rotary 8373)  No picture
    Flat idler pulley - 4.125" OD - 4-1/8" - WH 115119 replaced by WH 92-7084 (Napa 7-05443 with flanges) No picture
    Flat idler pulley - 4.438" OD - 4-7/16" - WH 103241 No picture
    Flat idler pulley - 4.500" OD - 4-1/2" - WH 6769 replaced by WH 93-1622 (Napa 7-05207 with flanges, Stens 280-131 Std, 280-826 HD Flat OD 4.125") No picture
    Flat idler pulley - 4.500" OD - 4-1/2" - WH 55-2860, 62-4520 and 62-4520-03 replaced by WH 36-3220 (Stens 280-826 HD Flat OD 4.125", Stens 280-131 Std) No picture
    Flat idler pulley - 4.500" OD - 4-1/2" - WH 26-1840 (Napa 7-05445 with flanges, Stens 280-890 HD) No picture
    Flat idler pulley - 4.500" OD - 4-1/2" - WH 112791 Can replace with 93-1622 by swapping the bushings in the bearing or adding shims washers to the mounting bolt
    Flat idler pulley - 4.500" OD - 4-1/2" - WH 6769, 106144 and 112895 replaced by WH 93-1622 (Stens 280-123 Std, Napa 7-05211 with flanges, Stens 280-495 HD) No picture
     
    Flat idler pulley - 5.000" OD - 51-4480 and 95-2800 replaced by WH 99-5879 (Stens 280-711 No flanges) No picture
    Flat idler pulley - 5.500" OD - WH 106107 No picture
    Flat idler pulley - 5.750" OD - WH95-2800 (Stens 280-713 HD Flat OD 5.125" with flanges, 280-711 = 5.000" OD x .500" ID x 1.1875" W no flanges) No picture
    Flat idler pulley - 5.750" OD - 51-4480 replaced by WH 99-5879 (Stens 280-713 HD Flat OD 5.125" with flanges) No picture
     
    Flat idler pulley - 6.250" OD - WH 105169 and 105613 replaced by 106023 No picture
     
    Sprocket 280-980 replaces Toro 2174, 93-1614, 93-1614-01 and 93-1614-03 used as idler on snowthrowers. (Aetna # AG2318-A)

    146 downloads

    Updated

  9. Free

    Hydro Foot Pedal Conversion Kit Installation Manual

    By kwalshy

    This is the installation manual for "Matt's hydro foot pedal"
     
    17 pages 2.16MB

    169 downloads

    Updated

  10. Free

    Wheel Horse Final Part 1

    By nylyon-(Admin)

    A large, but great slide show (Powerpoint required)

    2 parts

    606 downloads

    Updated

  11. Free

    Wheel Horse Final part 2

    By nylyon-(Admin)

    Power point required

    205 downloads

    Updated

  12. Free

    Pulley Idler V

    By gwest_ca-(File Mod)

    Banta Saw Stens pulley catalog
    22 pages 1.1MB
     
    HD = heavy duty (Better bearing)
    LB = Lawnboy
    Std = standard (Light bearing)
    Toro
    WH = Wheel Horse
     
    V-idler pulley - ????? OD - 1616 replaced by 1618 with mounting stud
    V-idler pulley - ????? OD - 4458 replaced 4974 Cast iron with 4567 bearing
     
    V-idler pulley - 2.500" OD - HD (Stens 280-245 replacement for 280-255 {$21.55} 2-1/2" OD x 3/8" ID) For 1/2" belt
    V-idler pulley - 2.625" OD - Std (Stens 280-255 {$11.48} 2-5/8" OD x 3/8" ID)
    V-idler pulley - 2.625" OD - Std  WH 12-5820 {$18.73} (Napa 7-05213, Rotary 729, Stens 280-255 {$11.48} 2-5/8" OD x 19/32" wide x 3/8" ID)
    V-idler pulley - 2.625" OD - 110370 replaced by LB 93-0320 {$15.43} (Stens 280-255 {$11.48} 2-5/8" OD x 19/32" wide x 3/8" ID)
    V-idler pulley - 2.625" OD - WH 102545 {nla} 2-5/8" OD x 3/8" ID) For 1/2" belt (Used on 77-42VX01 lawn vacuum)
     
    V-idler pulley - 2.875" OD - Toro 46-5650 replaced by 117-5299 {$31.30} (Stens 280-020 HD {$24.00} 2-7/8" OD x 5/8" wide x 7/16" ID) For 1/2" belt
     
    V-idler pulley - 3.000" OD - Toro 7-0823 replaced by 62-4530 {$22.97} (Stens 280-339 HD {$18.21} 3" OD x 1/2" ID x 1/2" wide 3/4" overall width for 1/2" belt (May be wrong because mounting bolt is 3/8")
    V-idler pulley - 3.000" OD - Toro 7-0823 replaced by 62-4530 {$22.97} (Stens 280-818 Std {$13.50} 3" OD x 1/2" ID x 1/2" wide 3/4" overall width for 1/2" belt (May be wrong because mounting bolt is 3/8")
     
    V-idler pulley - 3.062" OD - 100335 and 3-4243 replaced by 8205 (Stens 280-248, 280-127, 280-188, 280-263, 280-271, Napa 7-05212, 7-05214, 7-05215, 7-05477, Rotary 728) 3.0625" OD x .375" ID x 25/32" HT [Toro 3-4243 is similar]
    V-idler pulley - 3.062" OD - 7-0823 replaced by 62-4530 (Stens 280-271, Rotary 731, Napa 7-05212, 7-05215, 7-05491) 3.0625" OD x .375" ID x 5/8" W
    V-idler pulley - 3.062" OD - 109444 (Napa 7-05491) 3.0625" OD x .375" ID for 1/2" belt
    V-idler pulley - 3.062" OD - 1623 replaced by 92-7102 (Generic 1614ZZ bearing Used in belt idler for 5-2321 deck) 3.0625" OD x .375" ID for 1/2" belt
     
    V-idler pulley - 3.500" OD - 107195 replaced by 8510 (Stens 280-297) 3.500" OD x .375" ID x .750" W
    V-idler pulley - 3.563" OD - 109823 (Napa 7-05482) 3.5625" OD x .375" ID 5/8" belt groove
     
    V-idler pulley - 4.000" OD - HD 52-4580 or 524580 replaced by WH 99-5678 or 995678 {$40.84} (Stens 280-362 HD  4.000" OD x .375" ID (1/4" offset) x 3/4" HT, Napa 7-05485 HD) HD picture
    V-idler pulley - 4.000" OD - Std 7451 replaced by WH 95-7668 or 957668 {$16.20} (Stens 280-313 Std 4.000" OD x 13/64" wide x 3/8" ID)
    V-idler pulley - 4.000" OD - Std Toro 7-0431 (Stens 280-305 4.000" OD x 23/32" wide x 3/8" ID, Napa 7-05217)
    V-idler pulley - 4.000" OD - LB 24445 replaced by LB 703715 {$36.89} (Napa 7-05218, Stens 280-313) 
     
    V-idler pulley - 4.250" OD - 104143 replaced by 92-7103 (Stens 280-750 HD) 4.250" OD x .750" ID x 53/64" W
    V-idler pulley - 4.250" OD - 104974 replaced by 92-7103 (3/4" ID) (Stens 280-750 HD, Napa 7-05486)
    V-idler pulley - 4.250" OD - 101763 replaced by 92-7103 (Stens 280-750 HD 4.250" OD x .750" ID x 53/64" wide) [Uses 101480 bearing]
    V-idler pulley - 4.250" OD - 111170 Two used on the 05-37SC01 mower deck with 6-sided belt - No picture
     
    V-idler pulley - 4.500" OD - Less bearing 103247 nla
    V-idler pulley - 4.500" OD - 105616 4.500" OD x .375" ID
    V-idler pulley - 4.500" OD - 103245 nla 4.500" OD x .625" ID
     

    92 downloads

    Updated

  13. Free

    Price list 1959

    By gwest_ca-(File Mod)

    Price list dated April 1, 1959
    One in Straight from the Horse's Mouth dated February 10, 1959
     
    12-V Starter Electric for RJ-59 with battery
    110-V Starter Electric for RJ-59 Plug in
    235 Trailer Dump cart Kensico
    525 Roller Kensico
    AC-6 Cultivator
    BD-42 Blade Snow
    CBR-32 Mower Sickle
    DP-118 Harrow Disc - (Eight 11" discs)
     
    FA-58 Fender assembly
    Fenders, mounting box and hardware listed in November 1959 manual
    1 page 80KB
     
    FS-36 Spreader Fertilizer
    FW-60 Weight Front weight
    GC-3 Gun Grease
    GM-60P Mower Three gang
    L-24 Roller Lawn
    LS-30 Sweeper Lawn
    LTD-24 Trailer Dump cart
    MU-35 Mower Mulcher
    PC-24 Seat cushion
    PH-18 Harrow Spike tooth
    PP-8 Plow Turning 8in
    RC-10 Coulter
    RJ-58 with RMR-32
    RJ-59 Ride-Away
    RMR-32 Mower Rotary 32in
    SC-15 Aerator Spike disc
    TC-12 Chains Tire - Replaced by 8-2411 or 82411
    UW-64 Trailer 4-wheel wagon
    WW-12 Weight Wheel

    76 downloads

    Updated

  14. Free

    Hardware

    By gwest_ca-(File Mod)

    Hardware - What we know about it
     
    [1-807004 key replaced by 3257-24 Woodruff #5 (1/8"x5/8")
    [1-807009 key replaced by 3257-5 Woodruff #9 (3/16" x 3/4")
    [7-2581 key replaced by 3257-24 Woodruff #5 (1/8"x5/8")
    [7-2583 key replaced by 3257-27 Woodruff #4 (3/32"x5/8")
     
    [25-2490 ball replaces 104-2187 (7/16")
    [30-8610 set screw replaced by 3247-2 .3125"-18x.500" Socket head Cup point
    [31-4400 key replaced by 3257-5 Woodruff #9 (3/16" x 3/4")
    [38-1490 bearing wheel replaced by110513 bearing wheel replaces (3/4"x1-3/8"x3/8")
    [56-3010 ball replaces 112610 (5/16") Grade 200
    [56-3030 ball replaces 112648 (7/16")
    [56-3210 ball replaces 112663 (5/8")
    [88-4400 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [99-5379 bearing ball replaces 5269 (3/4" ID) Self aligning and locking
     
    [100-4580 key replaced by 3257-33 Woodruff #91 (1/4"x3/4")
    [100-5822 key replaced by 3257-33 Woodruff #91 (1/4"x3/4")
    [104-2187 ball replaced by 25-2490 (7/16")
    [104-2874 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [108-8549 ball (1/4")
    [251-58 bearing ball replaced by 251-123 (.6693" ID or 67mm ID)
    [251-123 bearing ball replaces 251-58, 251-136 (.6693" ID or 67mm ID)
    [251-136 bearing ball replaced by 251-123 (.6693" ID or 67mm ID)
    [251-145 ball bearing replaced by 251-183 (3/8")
    [251-171 bearing ball replaced by 251-180 (1/2")
    [251-180 bearing ball replaces 251-171 (1/2")
    [251-183 ball bearing replaces 251-145 (3/8")
    [251-210 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [251-271 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [255-6 ball (1/2")
     
    [1005 key Square (3/16"x3/16"x1")
    [1008 key #15 Woodruff (.250"x1.000")
    [1023 set screw .375"-16x1.000" Square head Cup point
    [1042 set screw .3125"-18x.3125" Socket head Cup point
    [1066 set screw .250"-20x.250" Socket head
    [1088 key Square (3/16"x3/16"x2")
    [1120 key Square (3/16"x3/16"x2")
    [1121 key Square (1/4"x1/4"x1-3/16")
    [1122 key replaced by 3257-5 Woodruff #9 (3/16" x 3/4")
    [1161 set screw .375"-16x.625" Square head Cup point
    [1188 key Square (1/4"x1/4"x3")
    [1194 key replaced by 937084 Woodruff #5 (1/8"x5/8")
    [1206 set screw .375"-16x1.250" Square head Cup point
    [1239 set screw .250"-20x.750" Socket head Dog-point
    [1252 set screw .375"-16x.875" Square head
    [1278 shim used with 5210 shim and 109114 hub cap washer
    [1348 set screw .3125"-18x1.000" Square head Cup point
    [1349 key Square (1/4"x1/4"x1-1/2")
    [1395 key Woodruff #6 (5/32"x5/8")
    [1499 bearing ball (11/16" ID)
    [1502 bearing ball (3/4"x1-5/8"x3/8")
    [1514 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [1515 bearing ball replaced by 101480 (3/4"x1-5/8"x1/2")
    [1519 bearing ball Ground (3/4"x1-5/8"x5/16")
    [1521 & 1521P 110513 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [1533 bearing ball (1-1/2"x2-1/2"x1/2") Have seen a typo 1133
    [1545 bearing ball replaced by 101411 (3/4"x1-5/8"x5/16")
    [1968 bearing ball replaced by 107743 (3/4" ID) Self aligning and locking
    [2119-555 key replaced by 3257-27 Woodruff #4 (3/32"x5/8")
    [2119-561 key replaced by 3257-5 key Woodruff #9 (3/16" x 3/4")
    [2525 key replaced by 3257-5 Woodruff #9 (3/16"x3/4")
    [3242-1 set screw replaces 909539 .3125"-18x.375" Square head Cup point
    [3242-2 set screw replaces 909540, 9095404 .3125"-18x.500" Square head Cup point
    [3242-6 set screw replaces 513685 .3125"-18x1.000" Square head Cup point
    [3243-5 set screw replaces 909554 .375"-16x1.000" Square head Cup point
    [3243-6 set screw replaces 909555 .375"-16x1.250" Square head Cup point
    [3243-13 set screw replaces 909556 .375"-16x1.500" Square head Cup point
    [3245-32 set screw replaces 3245-34, 909484, 909848, MW4251, MW4252 .250"-20x.250" Socket head Cup point
    [3245-34 set screw replaced by 3245-32 .250"-20x.250" Socket head Cup point
    [3245-35 set screw .250"-28x.250" Socket head Cup point
    [3246-2 set screw replaces 32137-1, 909862, MW4257 .3125"-18x.3125" Socket head Nylok
    [3246-3 set screw replaces 909863 .3125"-18x.375" Socket
    [3246-15 set screw .3125"-18x.250" Socket head Cup point
    [3247-2 set screw replaces 30-8610 909878 .3125"-18x.500" Socket head Cup point
    [3247-4 set screw replaces NN10385 .375"-16x.625" Socket head Cup point
    [3248-6 set screw .3125"-18x.3125" Square head Cup point
    [3257-2 key replaced by 3257-24 Woodruff #5 (1/8"x5/8")
    [3257-3 key replaces 937155 Woodruff #6 (5/32"x5/8")
    [3257-5 key replaces 1-807009, 31-4400, 1122, 2119-561, 2525, 937014, E807009 Woodruff #9 (3/16" x 3/4")
    [3257-21 key Woodruff #2 (3/32"x1/2")
    [3257-24 key replaces 1-807004, 3257-2, 7-2581, E807004 Woodruff #5 (1/8"x5/8")
    [3257-27 key replaces 2119-555, 7-2583 Woodruff #4 (3/32"x5/8")
    [3257-32 key Woodruff #61 (3/16"x5/8")
    [3257-33 key replaces 100-4580, 100-5822 Woodruff #91 (1/4"x3/4")
    [3517 ball (1/4") Also 3517P
    [4571 bearing ball replaced by 107744 (3/4" ID) Self aligning and locking
    [4831 ball (5/16")
    [4999 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [5210 shim used with 1278 shim and 109114 hub cap washer
    [5269 bearing ball replaced by 99-5379 (3/4" ID) Self aligning and locking
    [5493 bearing ball replaced by 101480 (3/4"x1-5/8"x1/2")
    [5596 bearing ball (11/16" ID sealed)
    [5740 bearing ball replaced by 7060 (5/8" ID)
    [5741 bearing ball (1-1/4" ID)
    [5804 bearing ball (7/16" ID x 29/32" OD x 5/16" wide)
    [6192 bearing ball (5/8" ID)
    [6438 set screw .250"-20x.750" Square head Dog-point
    [6507 key Square replaced by 105453 (1/4"x1/4"x1/2")
    [6593 bearing ball (7/16" ID x 1-1/8" OD x 3/8" wide)
    [6639 bearing ball (1-1/4" ID)
    [7060 bearing ball replaces 5740 (5/8" ID)
    [7758 set screw replaced by 7977 .3125"-18x.500" Square head Cup point
    [7977 set screw replaces 7758 .3125"-18x.500" Square head Cup point
    8006 key Square (1/4"x1/4"x3-1/8")
    [8649 bearing ball replaced by 101411 (3/4"x1-5/8"x5/16")
    [9554-4 set screw .375"-16x1.000" Square head
    [9849-6 set screw .250"-20x.3125" Socket head
     
    [32133-4 set screw .3125"-24x.500" Socket head
    [32137-1 set screw replaced by 3246-2 .3125"-18x.3125" Socket head Nylok
    [90865-6 set screw .3125"-18x.750" Socket head
    [93065 key Woodruff #6 (5/32"x5/8")
     
    [100907 bearing ball replaced by 107744 (3/4" ID) Self aligning and locking
    [100908 bearing ball replaced by 107743 (3/4" ID) Self aligning and locking
    [101411 bearing ball replaces 1544,  8649 (3/4"x1-5/8"x5/16")
    [101480 bearing ball replaces 1515, 5493 (3/4"x1-5/8"x1/2") ------------------------------------------------
    [101702 bearing ball replaced by 107743 (3/4" ID) Self aligning and locking
    [101781 bearing ball replaced by 107743 (3/4" ID) Self aligning and locking
    [101782 bearing ball replaced by 107744 (3/4" ID) Self aligning and locking
    [102534 bearing ball Self aligning and locking
    [103456 ball (7/16")
    [104396 bearing ball Front wheel (1" ID x 1-7/8" OD)
    [105453 key Square replaces 6507 (1/4"x1/4"x1/2")
    [106499 bearing ball (1" ID?)
    [107124 bearing ball Uses 1278 and 5210 shims and 109114 hub cap washer
    [107491 bearing ball replaced by 519557
    [107743 bearing ball replaces 1968, 100908, 101702, 101781 (3/4" ID) Self aligning and locking
    [107744 bearing ball replaces 4571, 100907 101782 (3/4" ID) Self aligning and locking
    [107854 key replaces 225566 Woodruff #3 (1/8"x1/2")
    [107856 key replaces 225565 Woodruff #61 (3/16"x5/8")
    [107869 key Woodruff #3 Special
    [107891 set screw 8-32x.3125" Socket head
    [107914 set screw .250"-20x.500" Socket head
    [107919 key replaces 225542 Woodruff #9 (3/16" x 3/4")
    [108483 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [108922 key Square (1/4"x1/4"x3/4")
    [109114 hub cap washer used with 1278 and 5210 shims
    [110513 bearing wheel replaces 38-1490, 88-4400, 104-2874, 251-210, 251-271, 1514, 1521, 1521P, 4999,  108483, 518213 (3/4"x1-3/8"x3/8")
    [111199 bearing ball (1-37/64" ID or 40mm ID)
    [112094 set screw .3125"-24x.3125" Socket head
    [112610 ball replaced by 56-3010 (5/16") Grade 200
    [112648 ball replaced by 56-3030 (7/16")
    [112663 ball replaced by 56-3210 (5/8")
    [200122 key Square (3/16"x3/16"x1")
    [200154 set screw .3125"-18x.500" Square head
    [225542 key replaced by 107919 Woodruff #9 (3/16" x 3/4")
    [225565 key replaced by 107856 Woodruff #61 (3/16"x5/8")
    [225566 key replaced by 107854 Woodruff #3 (1/8"x1/2")
    [309540 set screw .3125"-18x1.500" Square head
    [513439 key replaced by 937007 Woodruff #3 (1/8"x1/2")
    [513441 key Woodruff #9 (3/16"x3/4")
    [513442 key Woodruff #18 (1/4"x1-1/8")
    [513685 set screw replaced by 3242-6 .3125"-18x1.000" Square head Cup point
    [518213 bearing wheel replaced by 110513 (3/4"x1-3/8"x3/8")
    [519557 bearing ball replaces 107491
    [792047 key Woodruff #9 (3/16"x3/4")
    [792077 ball (5/16")
    [792078 set screw .375"-16x.375" Socket head
    [792139 ball (3/8")
    [908540 set screw .3125"-18x.625" Socket head Cup point
    [909348-5 set screw .250"-20x.250" Socket head
    [909352-5 set screw .250"-20x.500" Socket head
    [909362-5 set screw .3125"-18x.3125" Socket head Cup point
    [909484 set screw replaced by 3245-32 .250"-20x.250" Socket head Cup point
    [909531 set screw .250"-20x.375" Square head Cup point
    [909531-4 set screw .250"-20x.375" Square head Cup point
    [909532 set screw .250"-20x.500" Square head Cup point
    [909532-4 set screw .250"-20x.500" Square head Cup point
    [909532-6 set screw .250"-20x.500" Square head Cup point
    [909534 set screw .250"-20x.750" Square head Cup point
    [909535 set screw .250"-20x.750" Square head Cup point
    [909537 set screw .250"-20x1.250" Square head Cup point
    [909538 set screw .250"-20x1.750" Square head Cup point
    [909539 set screw replaced by 3242-1 .3125"-18x.375" Square head Cup point
    [909539-4 set screw .3125"-18x.375" Square head Cup point
    [909540 set screw replaced by 3242-2 .3125"-18x.500" Square head Cup point
    [909540-4 set screw .3125"-18x.500" Square head Cup point
    [909541 set screw .3125"-18x.625" Square head Cup point
    [909543-4 set screw .3125"-18x.875" Square head Cup point
    [909544 set screw replaced by 3242-6 .3125"-18x.9375" Square head Cup point
    [909545-4 set screw .3125"-18x1.250" Square head Cup point
    [909551 set screw .375"-16x.625" Square head Cup point
    [909551-4 set screw 375"-16x.625" Square head Cup point
    [909554 set screw replaced by 3243-5 .375"-16x1.000" Square head Cup point
    [909554-4 set screw .375"-16x1.000" Square head Cup point
    [909555 set screw replaced by 3243-6 .375"-16x1.250" Square head Cup point
    [909555-4 set screw .375"-16x1.250" Square head Cup point
    [909556 set screw replaced by 3243-13 .375"-16x1.500" Square head Cup point
    [909574 set screw .500"-13x2.000" Square head Cup point
    [909576 set screw .500"-13x3.000" Square head Cup point
    [909621 set screw .250"-20x1.750" Square head Cup point
    [909677 set screw .500"-13x2.000" Square head Cup point
    [909691 set screw .250"-20x1.750" Square head Cup point
    [909825 set screw 10-24x.250" Socket head
    [909843-5 set screw .250"-20x.250" Socket head
    [909848 set screw replaced by 3245-32 .250"-20x.250" Socket head Cup point
    [909848-5 set screw .250"-20x.250" Socket head Cup point
    [909848-6 set screw .250"-20x.250" Socket head Cup point Nylock
    [909848-S set screw .250"-20x.250" Socket head Cup point
    [909849 set screw .250"-20x.3125" Socket head
    [909849-5 set screw .250"-20x.3125" Socket head
    [909849-6 set screw .250"-20x.3125" Socket head Nylock
    [909849-S set screw .250"-20x.3125" Socket head
    [909850 set screw .250"-20x.375" Socket head
    [909850-3 set screw .250"-20x.375" Socket head
    [909850-5 set screw .250"-20x.375" Socket head
    [909850-6 set screw .250"-20x.375" Socket head
    [909851 set screw .250"-20x.4375" Socket head (A guess)
    [909852 set screw replaces MW4254 .250"-20x.500" Socket head (A guess)
    [909852-S set screw .250"-20x.500" Socket head
    [909852-4 set screw .250"-20x.500" Socket head
    [909852-5 set screw .250"-20x.500" Socket head
    [909853-5 set screw .250"-20x.625" Socket head
    [909854-4 set screw .250"-20x.750" Socket head
    [909854-6 set screw .250"-20x.750" Socket head
    [909861 set screw .3125"-18x.250" Socket head
    [909861-5 set screw .3125"-18x.250" Socket head Nylok
    [909861-6 set screw .3125"-18x.250" Socket head Nylok
    [909862 set screw replaced by 3246-2 .3125"-18x.3125" Socket head Nylok
    [909862-4 set screw .3125"-18x.3125" Socket head
    [909862-5 set screw .3125"-18x.3125" Socket head
    [909862-6 set screw .3125"-18x.3125" Socket head Nylock
    [909862-S set screw .3125"-18x.3125" Socket head
    [909863 set screw replaced by 3246-3 .3125"-18x.375" Socket
    [909865-5 set screw .3125"-18x.500" Socket head Cup point Nylok
    [909865-6 set screw .3125"-18x.750" Socket head
    [909865-S set screw .3125"-18x.500" Socket head Cup point
    [909878 set screw replaced by 3247-2 .3125"-18x.500" Socket head Cup point
    [909879 set screw .375"-16x.625" Socket head Cup point
    [909879-6 set screw .375"-16x.625" Socket head Cup point
    [909880 set screw .375"-16x.750" Socket head Cup point
    [909880-5 set screw .375"-16x.750" Socket head Cup point
    [909885 set screw .375"-16x1.750" Socket head Cup point
    [909950 set screw 10-32x.250" Socket head
    [909962 set screw replaces MW5724 .250"-28x.250" Socket head Cup point
    [909962-6 set screw .250"-28x.250" Socket head Cup point
    [909963 set screw .250"-28x.3125" Socket head Cup point
    [909963-5 set screw .250"-28x.3125" Socket head Cup point
    [920880-5 set screw .375"-16x.750" Socket head Cup point
    [933269 set screw .250"-20x.250" Socket head Cup point is WRONG
    [937002 replaced by 937022 Woodruff #15 (1/4"x1")
    [937007 key replaces 513439 Woodruff #3 (1/8"x1/2")
    [937009 key replaced by 937084 Woodruff #5 (1/8"x5/8")
    [937010 key Woodruff #6 (5/32"x5/8")
    [937011 key Woodruff #61 (3/16"x5/8")
    [937014 key replaced by 3257-5 Woodruff #9 (3/16" x 3/4")
    [937017 key Woodruff #11 (3/16"x7/8")
    [937022 key replaces 937002 Woodruff #15 (1/4"x1")
    [937024 key replaces 937099 Woodruff #16 (3/16"x1-1/8") May be hardened
    [937084 key Woodruff #5 (1/8"x5/8")
    [937036 key Woodruff #6 (5/32"x5/8")
    [937039 key Woodruff #9 (3/16"x3/4")
    [937045 key Woodruff #129 (3/8"x2-1/8")
    [937046 key Woodruff #RX (1/4"x2-3/4") Actual length 2"
    [937058 key Woodruff #128 (5/16"x2-1/8")
    [937079 key Woodruff #213 (1/8"x3/8")
    [937082 key replaces K101 Woodruff #3 (1/8"x1/2")
    [937084 key replaces 1194, 937009 Woodruff #5 (1/8"x5/8")
    [937085-1 key Woodruff #6 (5/32"x5/8")
    [937086 key Woodruff #61 (3/16"x5/8") One of these is WRONG?
    [937086 key Woodruff #6 (5/32"x5/8") One of these is WRONG?
    [937089 key Woodruff #9 (3/16"x3/4")
    [937090 key Woodruff #91 (1/4"x3/4")
    [937094 key Woodruff #A (1/4"x7/8")
    [937097 key Woodruff #15 (1/4"x1")
    [937099 key replaced by 937024 Woodruff #16 (3/16"x1-1/8") Hardened
    [937108 key Woodruff #22 Long (1/4" x 1-3/8") in wheel/axle hub. Some places the key is listed as 937128 and may be a typo
    [937121 key Woodruff #RX (1/4"x2-3/4") Hardened
    [937152 key Woodruff #3 Hi-pro (1/8"x17/32") HI-PRO
    [937155 key replaced by 3257-3 Woodruff #6 (5/32"x5/8")
    [937156 key replaced by 937222 Woodruff #61 (3/16"x5/8") This may be WRONG
    [937159 key replaces MW4627 Woodruff #9 HI-PRO (3/16"x25/32") This may be WRONG
    [937159 key replaced by 937225 Woodruff #9 HI-PRO (3/16"x25/32") This may be WRONG
    [937159 key Woodruff #606 HI-PRO ((3/16"x3/4") This may be WRONG
    [937168 key Woodruff #808 HI-PRO (1/4"x1")
    [937221 key Woodruff #6 (5/32"x5/8")
    [937222 key replaces 937156 Woodruff #61 (3/16"x21/32" Hard HI-PRO) This may be WRONG
    [937225 key replaces 937159 Woodruff #9 HI-PRO (3/16"x25/32") This may be WRONG
    [937225 key Woodruff #606 HI-PRO This may be WRONG
    [937232 key Woodruff #806 HI-PRO
     
    [6937082 key Woodruff #3 (1/8"x1/2")
    [9095404 set screw replaced by 3242-2 .3125"-18x.500" Square head
    [9098485 set screw .250"-20x.250" Socket head Cup point
    [9098505 set screw .250"-20x.375" Socket head
    [9098624 set screw .3125"-18x.3125" Socket head
     
    [20937082 key Woodruff #3 (1/8"x1/2")
     
    [E807004 key replaced by 3257-24 Woodruff #5 (1/8"x5/8")
    [E807009 key replaced by 3257-5 Woodruff #9 (3/16" x 3/4")
    [K100 key Square (1/4"x1/4"x2-1/2")
    [K101 key replaced by 937082 Woodruff #3 (1/8"x1/2")
    [KH10588 key Woodruff #13 (3/16"x1")
    [MW4251 set screw replaced by 3245-32 .250"-20x.250" Socket head Cup point
    [MW4252 set screw replaced by 3245-32 .250"-20x.250" Socket head Cup point
    [MW4254 set screw replaced by 909852 .250"-20x.500" Socket head (A guess)
    [MW4257 set screw replaced by 3246-2 .3125"-18x.3125" Socket head Nylok
    [MW4627 key replaced by 937159 Woodruff #9 HI-PRO (3/16"x25/32") This may be WRONG
    [MW5724 set screw replaced by 909962 .250"-28x.250" Socket head Cup point
    [NN10385 set screw replaced by 3247-4 .375"-16x.625" Socket head Cup point
    [NN10534 ball (5/16")
    [X-43-1 key Woodruff #3 (1/8"x1/2")
    [X-46-3 key Woodruff #13 (3/16"x1")

    103 downloads

    Updated

  15. Free

    Trailer SnowCo Wheel Horse Snowmobile OM IPL

    By CasualObserver

    Copy of the Instruction and Parts List for the 1970-72 snowmobile trailer offered by SnowCo that was branded as a Wheel Horse.
    Dated 6-1-69
     
    Model 9-0501 (Snow Co model 637 single)
     
    Model 9-0511 (Snow Co model 863 double)
     
    Double serial number 2219 - Build date 09/69 - Most likely considered a 1970 model

    81 downloads

    Updated

  16. Free

    Chart Attachment interchange 1955-2000 110 pages.pdf

    By Trouty56

    Tractor vs. Implement cross reference chart for models from 1955 - 2000
    110 pages 513.43KB
     
    This chart lists the original attachment model
    The model that replaced the original model
    The model that was available when the list was made
     
    Often many models between the last two are not listed.
    You must go from year to year and follow the model numbers to see them all.
     
    For a complete list of models click on the magnifying glass in the Search box. Enter DNA in the Search box and select Files from the drop down menu. Two pages of 33 results will come up in random order. Find the attachment you are looking for and click on it. The DNA for that model of attachment will come up. Look for the model of your attachment in the DNA list. They are organized from earliest to latest.
    OR
    Search the Files using a model number you know will work. Look through the results for DNA in another file name for the same item. That will have the full list of models.
     
    STD for a model indicates that attachment was standard equipment that came on that model of tractor.
     
    Mistakes in the online attachment list @ Toro. The Attachment Interchange is correct but confusing and the source of the mistakes.
    1970 *VS           rear discharge mower deck                             5-7362 is correct replaced by 5-0610 both CCW rotation
    1971                  rear discharge mower deck                             5-0600 - CW spindle rotation fits long frame tractors only
    1971 *CG-7 & 8 rear discharge mower deck should be model 5-7362 - CCW spindle rotation
    1972 *CG-7 & 8 rear discharge mower deck should be model 5-0610 - CCW spindle rotation
    1973 *VS           rear discharge mower deck should be model 5-0611 - CCW spindle rotation
     
    1970 *VS          side discharge mower deck                             5-2365 is correct replaced by 5-0700 both CCW rotation
    1971                  side discharge mower deck                            5-0710 - CW spindle rotation fits long frame tractors only
    1971 *CG-7 & 8 side discharge mower deck should be model 5-0700 - CCW spindle rotation
    1972 *CG-7 & 8 side discharge mower deck should be model 5-0701 - CCW spindle rotation
    1973 *VS           side discharge mower deck should be model 5-0702 - CCW spindle rotation
     
    1974 Replacement rear discharge mower deck for the model 5-0622 (side discharge) is wrong - should be 65-36XR01
     
    *Models using a vertical engine crankshaft

    4,574 downloads

    Updated

  17. Free

    Basic back hoe Plans

    By wallfish

    These plans are for a tow around type hoe but may be useful with some modifications if you wanted to adapt it to a tractor
     
    Part 1 
    20 pages 673KB
     
    Part 2
    15 pages 736KB

    171 downloads

    Updated

  18. Free

    Front Blade Lift Links

    By T-Mo-(Moderator)

    Drawing for both the short lift link, and the down pressure lift link for the front snow blade.
     
    Short lift link 105052
    Long lift link 7706 most likely replaced by 7706-01
     
    I drilled 3/8" holes in the bar and used 3/8" x 2-1/2" Gr.5 bolts. Cut the threads off.
    Weld the head of one bolt to the bar and try it for alignment. I ended up installing the 2nd bolt from the other direction and welding the head only. This provided 1/4" of offset and the pins are square to their attaching parts to minimise wear.
    Drill holes in the bolts perpendicular to the bar for spring pins. Use a countersink to ease the edges of the holes. 
    With the holes drilled like they are you now know where they are and you can instal the pins blindfolded.
     
    With manual lift the float is built in - everything floats including the lift handle.
    With hydraulic lift the float is accomplished by connecting the bottom of the link to the slotted hole. Down pressure is still available when the pin hits the bottom of the slot.
     
    Garry

    221 downloads

    Updated

  19. Free

    Price list 1958

    By Lane Ranger

    1 page 1.78MB
     
    This is a September 1, 1957 dated Wheel Horse official price list from a recent purchase I made of a Wheel Horse. This item was included in the original 1958 tractor purchase materials.
    Must be for the 1958 model year as the RJ-58 the only tractor listed.
     
    Another 1958 Price List from Rasor and West, Distributors in Miami, Oklahoma -effective September 1, 1957
     
    AC-6 Cultivator
    CBR-32 Mower Sickle
    DP-118 Harrow Disc - (Eight 11" discs)
    EC-35 Starter Electric for RJ-35 (Clinton engine)
    EK-35 Starter Electric for RJ-35 (Kohler engine)
    FC-24 Seat cushion
    FS-36 Spreader Fertilizer
    FW-60 Weight Front weight
    GC-3 Gun Grease
    GM-60P Mower Reel Three gang (Pennsylvania)
    GM-60Y Mower Reel Three gang (Yard-man)
    LMR-30 Mower Reel
    LR-24 Roller Lawn
    LS-30 Sweeper Lawn
    LTD-24 Trailer Dump
    MU-35 Mulcher Leaf
    PH-18 Harrow Spike tooth
    PP-8 Plow turning 8in
    RC-10 Coulter 10in
    RJ-58 Wheel Horse Ride-Away 4hp
    RMR-3256 Mower Rotary 32in
    SC-15 Aerator Spike disc
    SPR-42 Plow snow
    TC-12 Chains Tire - Replaced by 8-2411 or 82411
    WW-12 Weight Wheel

    85 downloads

    Updated

  20. Free

    Price list 1958

    By Lane Ranger

    1 page 478.38KB
     
    A 1958 Price List from Rasor and West, Distributors in Miami, Oklahoma -effective August 1, 1958
    Herms Equipment same date
    Straight from the Horse's Mouth price list dated October 1, 1957
     
     
    AC-6 Cultivator
    CBR-32 Mower Sickle
    DP-118 Harrow Disc - (Eight 11" discs)
    EC-35 Starter Electric for RJ-35 (Clinton engine)
    EK-35 Starter Electric for RJ-35 (Kohler engine)
    FA-58 Fender assembly
    FC-24 Seat cushion
    FS-36 Spreader Fertilizer
    FW-60 Weight Front weight
    GC-3 Gun Grease
    GM-60P Mower Reel Three gang
    LMR-30 Mower Reel
    LR-24 Roller Lawn
    LS-30 Sweeper Lawn
    LTD-24 Trailer Dump
    MU-35 Mulcher Leaf
    PH-18 Harrow Spike tooth
    PP-8 Plow turning 8in
    RC-10 Coulter 10in
    RJ-58 Wheel Horse Ride-Away 4hp
    RMR-3256 Mower Rotary 32in
    SC-15 Aerator Spike disc
    SPR-42 Plow snow
    TC-12 Chains Tire - Replaced by 8-2411 or 82411
    WW-12 Weight Wheel

    77 downloads

    Updated

  21. Free

    Price list 1961.pdf

    By gwest_ca-(File Mod)

    Poor copy
    2 pages 354KB

    54 downloads

    Updated

  22. Free

    Tractor Speedex 1631 IPL.pdf

    By Razorback

    IPL
    8 pages 373KB
     
     

    64 downloads

    Updated

  23. Free

    Wheel Horse Quilted Vests for the Winter Season

    By Lane Ranger

    52 downloads

    Submitted

  24. Free

    RS Business Cards

    By nylyon-(Admin)

    Business Card Proofs, I'll update with a better version when I can.  Hopefully you're not reading this 2 years from now without an update
     

    80 downloads

    Submitted

  25. Free

    Spring Extension 90106 replaced by 4629.jpg

    By gwest_ca-(File Mod)

    Lift assist spring for single stage snowthrowers and tillers
     
    Spring Extension 90106 replaced by 4629
    7-1/2" between hooks
    .220" wire
    1-1/2" coil OD
    5-1/2" coil length
    24-1/2 coils

    55 downloads

    Updated



×
×
  • Create New...