Jump to content
  • Please Read

    The classifieds are for MEMBER equipment only. Please do not post links to ad's or auctions on other hosted on other sites. Any such postings will be deleted. Posting of any comments other than questions regarding the ad will be removed without notice.  Please help us keep the classified section on track.  If you are posting an item for sale you MUST include your location and a price. Items posted without a location or price are subject to removal. You may NOT auction an item to the highest offer. RedSquare is not responsible for the accuracy of the listings. First and foremost, "make all deals at your own risk" and "settle all disputes off of the forum". It is your responsibility to validate the legitimacy of the seller and the sale.  You may report a failed transaction to the moderator administration team which will be evaluated for repeat offenders.  Any effort to deliberately deceive or defraud members will result in expulsion from the forum.

     

    Open classified ads will be removed after 6 months of original entry.  Once your ad has been removed, you may re-enter your ad again. Do not post duplicate ads in an attempt to increase visibility, any duplicate posted will have newest ad removed, continued posting of duplicate ads will result in suspension.

  • Parts for 701


    Chrishar
    • Active

    Looking for the bracket that goes from fender to fender and a hood and the three bolt rear hubs  for a 701 thanks

    • Like 1


    User Feedback

    Recommended Comments

    WHX24

    Posted (edited)

    Hoods from other models will work too but won't have the solid front. A good body man could cut out the grille and replace with solid so as you would never know it if a full blown resto. The fender brace is an easy fab. Let us know if you need dims. On the hubs check with @Lane Ranger I got one from him awhile back he may have more. Hope this helps your project. 

    Edited by WHX24

    Share this comment


    Link to comment
    Share on other sites

    Dimensions for the bracket that goes from fender to fender.

     

    Start with a piece of 3/4" X 1/8" flat stock. Cut it to a length of 22 1/4". Drill a 3/8" hole dead center - 11 1/8" from each end. Measure 10 1/2" from each end and scribe a line, this will be your marks for the bends. Make your bends a little at a time until it fits properly between the fenders. With the bracket fitting neatly between the fenders & on the bottom of the tool box, mark your holes for the fenders. these holes will be 1/4".

     

    188417083_IMG_20201125_165158178(1).jpg.9e14e03995ee0d4340b65a033120221d.jpg

     

     

    • Excellent 1

    Share this comment


    Link to comment
    Share on other sites
    6 hours ago, Achto said:

    Dimensions for the bracket that goes from fender to fender.

     

    Start with a piece of 3/4" X 1/8" flat stock. Cut it to a length of 22 1/4". Drill a 3/8" hole dead center - 11 1/8" from each end. Measure 10 1/2" from each end and scribe a line, this will be your marks for the bends. Make your bends a little at a time until it fits properly between the fenders. With the bracket fitting neatly between the fenders & on the bottom of the tool box, mark your holes for the fenders. these holes will be 1/4".

     

    188417083_IMG_20201125_165158178(1).jpg.9e14e03995ee0d4340b65a033120221d.jpg

     

     

     

    Share this comment


    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now



×
×
  • Create New...