Classifieds: Classifieds

50LB Wheel Weights

Tue, 23 Jun 2026 21:43:05 +0000

I have 2 pairs of 50LB wheel weights. I think these are Bolens. They are in very good shape and they are stackable. $50 a pair

Freee… Bolens eliminator chassis and gearbox

Sun, 21 Jun 2026 14:28:14 +0000

I needed a few items from this tractor and now passing it along to keep another alive. The hydrostatic rearend is still good and any other supporting parts. I removed the sheet metal and tires for my project.

I can load onto your truck or trailer! DID I SAY FREE?? Lol

Air Mattress

Fri, 19 Jun 2026 15:32:17 +0000

Queen size raised air mattress. Has built in 115 volt air pump. For inflation/deflation.

Air valve leaks a small amount but will stay inflated overnight. Only used a couple times for camping in a enclosed.

Pickup only or can deliver to the Big Show 2026.

Troy Built 2410 Snowblower

Tue, 09 Jun 2026 22:13:04 +0000

I have a Troy Built 2410 snowblower for sale. There is nothing wrong with it and it starts and runs as it should. Has a fresh oil change on it. It also has the option to plug into an extension cord and have electric start.

20260510_150347.mp4

Petroliana - Collectible 5 Gallon Marvel Mystery Oil Can

Mon, 25 May 2026 22:54:05 +0000

As many of you know, I collect small oil cans. However, this one came to me via my brother-in-law. Since I know some of you collect a lot of garage graphics. I am offering this one. It is empty.

I can bring it to the big show to save you shipping. Otherwise, shipping will be calculated and at your expense.

Brother-in-law is asking $100 or reasonable offer.

If not sold here, it's going on eBay.

The tiny can by it's side is not included or for sale.

Reverse side the graphics are not as good.

Motorcycle/ATV/Snowmobile Cold weather Jacket and Pants Set

Wed, 13 May 2026 22:29:47 +0000

Tourmaster Pivot 2 jacket. Weatherproof outer liner. Removable inner liner. Mesh inner liner for warmer days. Lots of pockets and adjustable snaps. Armored back. Reflective piping No rips or tears. Size 2XL Tall 48" Venture cold weather pants size 3XL size 40-42 Legs zip open for easy on and off. I'm 6'1" and 230-240 and the pants are a tad big but it made for easier on and off of the bike. Super Warm. Wore them at December Buffalo Bills games and basked in the warmth!! $100. Located in Waterloo N.Y. CAN BRING TO BIG SHOW!!!!! w deposit.

Allis chalmers 712 shuttle

Tue, 12 May 2026 14:52:14 +0000

Got an early model allis chalmers 712 shuttle I seen it run and drive about 2 years ago it needs a fair amount of work, the price is negotiable and I will trade for sears suburban 3 point attachments it might need to be rewired but i am honestly not too sure i just dont have the time to fix it or look into it

Cub cadet 70

Tue, 12 May 2026 14:47:58 +0000

Ive got a decent cub cadet 70 she has a snow blade and a fair amount of spare parts I have a cub 100 chassis to go with it for parts, it runs and drives the blade is not fully mounted on, last ran her about 3 months ago drained the fuel out of the carb so all it should need is some gas a key battery and fuel (IT IS MISSING THE AIR CLEANER ASSEMBLY) it also has a rebuilt starter generator i installed around 10 months ago the oil was changed approximately 7 months ago but it ran great for me the very little I ran it

Vintage valve seat cutter

Sun, 03 May 2026 22:53:04 +0000

Shown is a valve seat cutter for small engines. Can used on most flat head engines.

Includes guides seat cutters, handles, reader and sanding disc.

John Deere Bagger

Wed, 29 Apr 2026 12:30:55 +0000

Here is a John Deere rear bagger for a 200 series tractor from the 1970's. What you see is what you get. Also I will through in the bags for it. They are pretty much shot but you can have them for the frames. $125 OBO Also open to trades.

WTB: Briggs and Stratton PN 210534

Sat, 18 Apr 2026 17:58:07 +0000

Wanted To Buy. Briggs and Stratton PN 210534 Intake Tube. This was used on Briggs 8B horizontal shaft engines and several other Briggs models from the 50's and early 60's. I'd like to buy 2 if possible but need one to complete an engine restoration on a David Bradley.

Onan p218g

Sat, 04 Apr 2026 02:12:47 +0000

i have an onan p218g off a john deere with a 1-7/16 inch crank shaft. it will be running soon. its got a bunch of little nice to haves done like the valves being set and a few gaskets like intake ad valve cover gaskets. i cleaned the pumper carb out on it and have to bolt the starter on it. asking 325 OBO

John Deere 214

Sat, 21 Feb 2026 21:06:36 +0000

Here is a non running 214. I just picked it up and have not played with it yet. $225 OBO come and get it. If I start working on it I may keep it I am open to trades let me know what you have. If there is any interest I will post better pictures. The box blade and sleeve hitch are NOT PART OF THE SALE. Pick up in CT I can help load.

Kohler K-91 Powered Air Compressor

Thu, 06 Nov 2025 10:46:30 +0000

Cool little all mechanical air compressor for sale. Air actuated governor throttle, centrifugal clutch, simple stuff. Rolls over nice with good compression, I’m sure it’ll run with a little tinkering. I’ve never messed with it, it’s time to go. All these K-91s WANT to run!

Pennsylvania Panzer T-758

Wed, 05 Nov 2025 00:05:37 +0000

Mrs. P has decided it’s time to sell her panzer. If you don’t know much about these machines, they are absolutely stout! Kohler S/G K-181 engine runs good! The pictures should explain quite a bit, but the drive belt is is very much like a drill press. You move the belt to select which one of the three forward gears you would like to use. You then start the engine, and use the motion control lover to go forward. Reverse moves the driveshaft in, spinning it backwards. this tractor is about twice as heavy as any comparable sized Wheel Horse. Everything is super super super heavy duty. The Mopar rear end still has the factory drum brakes, and they have been modified as turn brakes by Pennsylvania panzer. The rear tires still have the little nubbies on them, somebody did a pretty good restoration to this tractor before we owned it. With the sale, it will have a brand new battery and be in running condition. It has a new coil on it, from the last time we ran it at a show. If you have any questions, please ask!

Little green walk behind tractor with cultivator

Tue, 04 Nov 2025 23:46:57 +0000

I am not positive on much of anything on this little guy, but it’s kind of cool! It has ratcheting hubs and solid tires.

IMG_8249.mov

Cub Cadet snow/dozer blade

Fri, 24 Oct 2025 21:14:50 +0000

Cub Cadet snow/dozer blade with under carraige.

off of cub cadet 782

$100

PM or call /text 1-217-417-3156

pics won’t load

text for pictures

David Bradly Hood and control rods

Fri, 24 Oct 2025 21:08:13 +0000

David Bradley Hood and control linkages.

$100

PM or call/text 1-217-417-3156

pictures wont load

text for pictures

Sold

Fri, 24 Oct 2025 20:52:59 +0000

Brinly 3 point 12” plow with depth wheel.

gravely dump cart

Sun, 19 Oct 2025 22:15:27 +0000

WheelHorse compatible

Brand new K-181 short block for Cub Cadet

Sat, 04 Oct 2025 22:20:06 +0000

Brand new never run K181 8HP short block for Cub Cadet. Looks identical to a WH Spec eng. except for the dipstick. Comes with new magneto along and extra bearing plate .The paperwork from Kohler that was with it says 7HP but the stroke says 8HP. Would bolt right into a short frame Horse. Pan is correct Can hold and bring to next years Big Show w/deposit. $275.00

SOLD!

E-Z Rake leaf vac

Fri, 03 Oct 2025 16:22:20 +0000

E-Z Rake leaf vac. 5hp Briggs engine, starts and run well. Wheel horse mount and boot. Thanks