Classifieds: Classifieds

Wheelhorse parts lot

Sat, 06 Jul 2024 17:45:06 +0000

Shown are random parts mostly from a C-111

1. Rectifier $5 from C-120

2. Pto bracket $5 from C-120

3. Pto linkage $7.50 from C-111

4. Manual depth stop $5 from C-111

5. Pto lever $5 from C-111

6. Pto hoop $5 from C-111- sold

7, 8, 9 Drive pulley bearing and trust plate $40

Used on 1" shaft Briggs engines or a predator engine hard to find!

10. 1" and 1 1/8" pto race $5

11. Magnum air cleaner cover $30 - sold

12. Pto disc and clips. $20

13. 8 speed input pulley. $15 from C-120

14. Attachmatic assembly complete $15

15. Pto bell $20

All prices exclude shipping cost. I will ship all items.

More pictures available.

Wheel Horse 48"snow & dirt blade, wheel weights and tire chains

Fri, 05 Jul 2024 13:25:05 +0000

Wheel Horse 48" snow or dirt blade in good usable condition. Comes complete with blade angle handle and lift link. Also includes wheel weights (40lbs each) and tire chains to fit 23x9.5-12 wheels and tires. This blade fits most C series, 300, 400, and 500 series wheel Horse tractors (extension required but not included for the 500 series with forward swept front axle). Tractor and wheels shown in pictures not for sale, just included to show fitment.

1981 C-145 automatic

Tue, 02 Jul 2024 09:25:17 +0000

I have the hub caps, It runs great,the deck works but is ruff Kohler K series cast iron motor

Tiller

Tue, 02 Jul 2024 05:34:50 +0000

Wheel Horse RotoTiller - good condition - operates as it should - axle turns freely - recently operated for garden tilling - model #07-36TL03 - parts included - pto mule idler pulley unit and guard - lift assist spring, lift chain. Buyer should confirm use for their tractor model. Believed to fit most 300, 400, 500 Series WH Tractors. Sold as is, no returns. Cash pick up near Poughkeepsie, NY area. Please send p.m. for additional info and to arrange pick-up.

1960 suburban need to sell moving

Mon, 01 Jul 2024 22:25:11 +0000

I have a nice suburban for sale it is missing the engine and rear drive pulley fuel tank does not leak tires are not dry rotted

make offer Won't just give away

Brinly type plow

Mon, 01 Jul 2024 16:30:53 +0000

Brinly style moldboard plow -- very good condition. Please confirm match to your tractor. Sold as is, no returns. Cash Pick-up, Poughkeepsie NY area. Send p.m for more info.

856 Package

Sun, 30 Jun 2024 15:47:27 +0000

856 package recently purchased from the original owner. This tractor was always stored inside. The details of what comes with the package are below. This would need to be picked in MA. Thx.

1. 856 tractor

2. 36” deck, RM-366, that needs 1 new spindle.

3. HL-5 head and tail light kit

4. AC-675 cultivator, 2 piece

5. PP-101 plow and coulter

6. ST-376 snow thrower, 37”

7. DP-871 disc, double

8. Extra belts and blades

9. Original documents and keys

1974 B80

Fri, 28 Jun 2024 13:25:24 +0000

I have a 1974 B-80.4 speed.Runs and operates as it should.Has some new parts and is in good mechanical shape.

the decal on the hood is not correct !

No Deck

$350 OBO

MD 21061

SOLD !!!

toro 314-H

Mon, 24 Jun 2024 14:47:12 +0000

314-h

7xx hours

42" mower deck (extrememly quiet)

machine is show quality. No issues, no smoke, no leaks

hydro drive

hydro lift

chrome hub caps

I have a option for a tall chute snowblower

nice machine, led headlights

Ready for show , mow or snow

location holland mi

very nice machine. Can email or text pictures

cant load them here, file to big

mightymac shredder

Sun, 23 Jun 2024 01:38:36 +0000

looks to have not been used much. I think its all there. The mount for front of wheel Horse tractor is there also. Was told it was purchased new with the c160 that I bought years ago. Everything turns like it should. Been in the dry as long as I've owned it. OBO or trade on belly and rear mount cultivators or ????

Bringing several Tractors to big show

Thu, 20 Jun 2024 02:16:51 +0000

I'll be there around 8am with several Tractors for sale

314-8. $450 needs carb work

C-141 $200 kawasaki , runs/drive

857 $200 , barn find, trans locked up

B-100 $250 runs and drives

308-8 $250 runs and drives

310-8 $150 roller, no engine

1277 $300 runs and drives

I will not post pictures, you can come see them in person, hear, taste and smell. You get the idea. See you all there !

1990 520H/2 stage snowblower/48" Deck

Wed, 19 Jun 2024 13:41:57 +0000

I bought this a few years ago to fix up for my daughter to use at her place. her plan has changed and I just don't need this. Nicest one I ever had and hate to sell..... As you can imagine, I was doing this for my daughter and did not want any problems for her or for me to come fix so I have gone through every possible issue on this and fixed, repaired, replaced anything even questionable at all. For her, I spared no expense in making this nice and dependable.......I have a very extensive list of all I have done to it, way too much to list, but if you are interested I can go over it..... I spent $600 on the snowblower alone, dismantled and replaced every piece of hardware with stainless, every bearing, new impeller, paint, etc. And have chains for the tires....... 48" deck which is above average and zero rusting thru spots at all. I went thru it, put it on my mower and it ran great, smooth and quiet so ready to use. Have the deck chute and mule drive also......... This is a true buy it and use it with zero work needed done to it. All the shiny hardware you see on the tractor is all stainless steel as well. ....I`m asking for $3300 now..... Call/text Jim

42" Side discharge deck

Sun, 16 Jun 2024 23:50:14 +0000

1993 42" Side discharge deck - came with a deal and I do not need. Had a small 1/2" tear near rear wheel mount but had it welded so fixed. No rot otherwise and spins nice and quiet.

New deck belt - Comes with mule and end deflector

Can bring to big show this week if paid.

Wheel Horse Onan Tool Kit ON-420-0556

Sun, 16 Jun 2024 18:57:05 +0000

This is a kit of special tools to service Onan P Series engines, Kit is complete with no missing tools. Case is undamaged. It looks to me as never having been used. There is a foam separator still present. Part number is ON-420-0556.

1994 314 H with 42" SD deck

Fri, 14 Jun 2024 21:02:41 +0000

Nice 94 314 H with 42" SD deck. 482 hours - good condition everything works.

Deck had a 1/2" tear - near drivers wheel mount - but had it welded, Otherwise, solid, no rot and quiet. Mule drive and end deflector included but not shown

Would keep it but found one with lower hours so this has to go.

Can deliver to big show if deposit received for half of price. I only will be at big show Thursday afternoon and Friday .

Can send more pictures if interested.

8 HP Briggs (800 special)

Tue, 11 Jun 2024 11:47:54 +0000

Complete running motor from a 1971 800 Special. The electric clutch is untested. I have a video of the motor running before I removed it. Motor did not smoke.

KOHLER MAGNUM Air cover

Mon, 10 Jun 2024 20:03:09 +0000

Shown is a air cleaner cover for Kohler Magnum 10-16Hp engines..it has no cracks or chips..

Switched to a metal dome cover reason for selling.

1978 C-141-8 Loader Tractor

Thu, 06 Jun 2024 00:55:11 +0000

I have decided to sell some of my Dad's collection due to his passing in March. Tractor has been stored under cover but hasn't been used in the past 5 years. Started right up and runs fine, loader works like it should. Only issue that I can see is it has a leaky right rear axle seal. Has rear wheel weights and rear weight box with two cement blocks, one not pictured. Call with any questions. I will be going to the big show in PA, so I could deliver there if paid in advance.

Lawn Ranger - 1968 (Model 1 2361)

Tue, 04 Jun 2024 15:28:12 +0000

This is from the final year that WH made round hoods. The larger horsepower models ended with the 854 in 1964.

I’ve owned this for four years and last used it in March to grade a gravel driveway. It ran and functioned as expected.

Before me the PO claimed 8-10 years of ownership, garage-stored, and used only for plowing a small driveway.

The nice:

- Complete with original or period parts and no modifications or hacks

- Clean tins

- 6-3111 38” snow/dozer blade with unusual factory adjustable-height skids

- 5-3322 (supersedes 5-3321) 32” mower deck (complete with a solid shell it will need bearings, belt, and maybe blades) -- I never mounted or ran this

- Engine is an early 70’s HH-60 replacement which is externally identical to the original H-60 but with cast iron sleeve and ball bearings at PTO end; both electric and recoil starting (battery not included)

- Original tires all around (Wheel Horse branded) -- all holding air and giving good service (the fronts are particularly hard to find)

The not as nice:

- sloppy repaint by PO

- seam on seat back is ripped

- I noticed today that there is some rust in the fuel tank

Delivery options:

- pick up at my shop

- local up to ~20 miles; farther negotiable

- with advance payment, anywhere along the route from Cortlandt, NY to (or at) the Big Show

Mower

Hydro foot control pedal

Mon, 03 Jun 2024 15:06:30 +0000

I have this pedal kit that I started to build for my 312 Hydro. It should fit 300, 400, and 500 series tractors. It uses a stock brake pedal from an 8 speed tractor, The link arm slides over the brake pedal and is held in place with 3 set screws. This allows the pedal angle to be adjusted separately from the linkage adjustments for operator comfort. I started to build this kit and then decided that it wasn't for me because I have very long legs and a foot control is not comfortable for me. I believe this is a pretty good design, it fits up behind the factory belt cover with no modifications. You will need to add some sort of a reversing pedal and a return to neutral device if you wish. I purchased the pedal as new old stock for $60 so it has no wear inside the bore. Then with the fabrication I have done, and the misc supplies (heim joints, rod couplers, threaded rod, lock collar, etc.) I am asking for $150 shipped. I includes everything in the photos that show the foot pedal, I will partially disassemble it for shipping. Let me know if you have any questions.

My email is wagner.rsw@gmail.com

(2) wheel horse raiders

Mon, 03 Jun 2024 14:25:12 +0000

Im a selling 2 Wheel horse Raiders.

1. Wheel Horse Raider 12. Older refurbish, (not perfect, but looks great) This machine has a set of 75lbs wheel weights on it, brand new set of ag style tires. It also comes with a set of rear turf tires on rims. Also included is a 36" mower deck with mule drive/belt. This machine also has LED lights. Brand new ignition. Runs great, drives great, new fluids. Needs nothing

2. Wheel Horse Raider 14. Older refurbish, again not perfect, but looks great. Slightly darker shade of red, but still looks good This machine runs and drives great, fresh oil change, led lights. It has a set of 50lbs wheel weights on it. Great seat. This machine does not have a pto on it, but one can be easily sourced

Im asking 1400 for both tractors, with all the extras. I do have a small wagon (shown) that i will sell for a great deal if you want

Will consider trade for toro/wheel horse branded machines

Cash is prefered. Pick up is in Holland Mi 49460

Both machines barn kept, ethanol free fuel in them

Both machine start, run and drive fantastic

They are turn key machines Prefer to sell as a package.

May seperate but the better deal is buying the package and selling what you dont want!

pics can be emailed to texted.

File to large to load here

C-81

Sat, 01 Jun 2024 09:46:32 +0000

Went through this one front to back. Many new parts. Have all paper work to prove the $$ Ready to go to work. Also has lights that came with it on the hood.

New Kohler K241 mini block and other parts

Fri, 31 May 2024 17:55:16 +0000

Brand new wheel horse style K241 mini block and the start of parts for complete engine. Was going to build this when I had other K241s but moved them all on. Original box disintegrated so part number unknown. If you can find one, a new mini block starts at $800 and go up from there.

Will need crankshaft (thought I had one but does not fit...) stator, breather assembly, fuel pump, seals, gaskets, nuts and bolts and a couple of pieces of tin, to make complete engine - then add solenoid, coil, points cover, wiring and you are there. Will also throw in a used starter.

Great winter project to re-build your K241 - use what you have to complete and then you are re-powered!!

Local pickup only as it is way too heavy and bulky to ship - but I can bring it all to the big show if paid - I plan to be there Thursday afternoon and Friday, but not Saturday.

Thanks for looking!

Wheelhorse Nelson muffler

Fri, 31 May 2024 03:45:34 +0000

Shown is a used muffler removed from a C120 that had a tecumseh hh12 engine.

There are no holes or welds on this...it would clean up nice for repainting.

Buyer pays shipping.

Wheelhorse Tombstone Weights (x3)

Thu, 30 May 2024 22:17:14 +0000

thanks to a local wheelhorse collector i have aquired 4 RJ tombstone weights only really need 1 so the other 3 are for sale don't need to sell but would like to see if there is any interest send an offer if interested Thanks for looking!

they all have mounts aswell can bring to big show if desired don't have any pics at the moment but all are in decent original shape

not my picture but this is what they mine look like with the handle and logo

Wheel Horse Snow/Dirt plow

Thu, 30 May 2024 19:46:36 +0000

Snow dirt plow - yes, I know it is the wrong season but it came in a package - I already have one - and I don't want to work around it till snow.

Can bring to big show if desired

Wheel Horse 2" receiver hitch

Thu, 30 May 2024 16:04:50 +0000

Bolt on 2" receiver hitch for rear axle - nicely made - came with a deal but do not need

Can deliver to big show if paid

wheel horse "No Name " 12 1973

Thu, 30 May 2024 15:04:07 +0000

1973 No Name 12 - bought 15 years ago - only work other than maintenance is upgrade to 1 1/8 axle transmission, new starter, seat, and larger pto cone.

Hard to find a better unmolested, unrestored example of this fine machine. Been inside all the time I've had it

Runs great, no smoke, starts easily. Been a joy to own but do not use it enough to justify the garage space so time to move it on.

Wheel horse 300kw Generator

Thu, 30 May 2024 14:40:24 +0000

Wheel horse 300kw generator picked up years ago - used a couple of times and has been sitting since - decided it was best for someone new to use

All I have is shown

Can deliver to big show if paid

Brinley Hitch for sale

Thu, 30 May 2024 14:28:44 +0000

Brinley Hitch came with tractor and do not need

Can bring to big show if paid.

Brinley Plow for sale

Thu, 30 May 2024 14:26:19 +0000

Picked up this plow in a deal and do not need - looks to be in good shape but been sitting for a while

Can bring to big show in PA if paid for

Brinly Clevis hitch Cultivator

Sun, 26 May 2024 14:43:49 +0000

old brinly cultivator looks to be in ok shape can ship at buyers cost any questions please ask Thanks for looking!

416-h with side discharge deck need to sell moving

Sat, 25 May 2024 01:16:56 +0000

Selling for my mom. Runs and drives has mower deck may need new bearings in deck. It's been sitting battery may need to be replaced. 48 inch deck

520-H/HC Forward Swept Axle

Fri, 24 May 2024 20:15:55 +0000

520-H forward swept axle in good shape comes with washers in picture thanks for looking! any questions feel free to ask

Rear Rims 12-7

Fri, 24 May 2024 20:09:24 +0000

set of nice rear rims off a 520-H but will fit many other models located in Leon NY any questions feel free to ask Thanks for looking!

60 inch 520 hc mower deck "MULE" "idler"

Fri, 24 May 2024 03:32:13 +0000

Rare hard to find "MULE" "idler" for 60 inch mower deck pto belt -- typically used with 520 HC tractor -- pulleys turn freely --- pick up Poughkeepsie, NY area - or buyer pays to ship. Sold as is, no holds, no returns. Buyer determines match to tractor and mower.

Wheel Horse Chrome Wheel Covers...

Fri, 24 May 2024 01:47:14 +0000

Set of 4 Wheel Horse Hub Caps and Set of 4 Plain Hub Caps....These are for the 12" and 8" Wheels....They could use some TLC to be Nicer....They do have a bit of Rust , Scratches , and Dings....These are Not Show Quality but would be Nice on a Worker Tractor....75.00 Takes them All

Wheel Horse 48" Side Discharge Mower Deck with Mule Drive...

Fri, 24 May 2024 01:09:14 +0000

WheelHorse 48" Side Discharge Mower Deck....Very Nice Condition...Solid Shell with NO Holes....Spindles in Good Shape....Will Likely Need a New Belt as it is Dry Cracked from Setting UnUsed...Comes with Nice Mule Drive...These are Getting Harder to Find in this Shape....320.00.

Wheel Horse 417-Hydro...

Fri, 24 May 2024 00:57:44 +0000

Late WheelHorse 417- Hydro Tractor....No Engine but comes with Miscellaneous Engine Parts...( see pics )...Tires all Hold Air....Eaton 11 Transmission has Clean Full Fluid....Good Heavy Duty Axle Hubs...Hydraulic Lift Cylinder....What You See in Pictures is What There Is...60.00 Takes It All.....Thanks.

NOS Pulley Lot

Thu, 23 May 2024 18:20:56 +0000

113633 60" SD

107439 36" RD SD

93-0320 x2

7466 Engine Drive

106074 48" Deck

113524 60" SD

92-7102

92-7103 x2

111170 36", 37", 42", 48", 50", 60"

113525 50" SD

105781 Engine Drive

106848 42",48" Deck

113526 60" Center

109310 42" RD

106846 x3 42" Deck End

106165 Engine Drive

4974

8821 x4

All may fit more decks this is what I have found so far

1959 RJ58

Thu, 23 May 2024 16:32:07 +0000

59 RJ58 for sale. I have removed the Showerhead muffler and I added a traditional recoil. Listed for sale as pictured and in the video.

I have room for this OR my 1056 listed to bring to the Big Show. Deposit required.

Wheel Horse Collectibles

Wed, 22 May 2024 14:27:23 +0000

- 4 parts cards ( $40 )

- 1 lighter ( $75 )

- 1 countertop pen with holder( sold )

Lighter is in working condition.

Call or text with any questions and yes I can ship them. Thanks ahead of time! (Pocket knife is sold)

Wheel Horse lawn roller

Mon, 20 May 2024 18:03:29 +0000

Hello, this roller belonged to my grandfather and I’ve had it for years. I no longer have a use for it but hate to junk it. It’s a bit rusty but free to anyone who can pick it up here in Navarre, FL. Please call me if interested, thanks!

Mike 803-847-2668

1966 856

Mon, 20 May 2024 14:40:24 +0000

Selling an 856 tractor only.

It runs really smooth, and the transaxle is solid.

Has the original Wheel Horse branded front tires.

Has a rear quick hitch for snow blade/tiller

Can be delivered to the Big Show in Arendtsville, PA for a $100 deposit or prepaying.

Local pickup in Adelphi, Ohio.

300 firm

Video of it running

1966 1056 8 Speed Custom, 36” RD deck

Thu, 16 May 2024 19:46:04 +0000

I have this 1056. I hate to get rid of it, but I am to the point I need to purge a few. 300 series muffler sounds and works well. Starter/generator works well, engine runs great with no smoke, transmission feels great in all gears. Good drive belt, runs and drives great. The headlight/accesory wire on the S/G was broken when I got it, so I’ve never used lights. Older paint job, I don’t know the history of that. I’ve owned it since 2019 and it’s never let me down. Other than maintenance, I think I’ve only put a starter/generator belt on it. It has a little flutter while it runs, it’s always done it and I’ve never been bothered by it. The seat has a couple rips, but is quite comfy. Being stored indoors, I never found a better seat to replace it.

It came with 6” front wheels originally. I have not measured the spindles for a difference, but there are 8” wheels on it now.

The 36” RD deck is ok. It seems tight, could use some blade attention. I used it to mow my trails in the field mainly, so I wasn’t ever concerned with anything but knocking down the masses. The mowed area is from this machine. You can see how tall the grass left and right is. It was all this height.

I DO NOT KNOW CURRENTLY IF THERE IS ROOM TO HAUL THIS TO THE BIG SHOW! If I can fit it, I’ll stick it in the buy/sell/trade thread.

NOS Blades/Blade Kits

Wed, 15 May 2024 16:08:56 +0000

9819 Blade Kit (36" Deck)

8969 Blade Kit (36" RD Deck)

100200 in Box x2 each (42" SD)

100200 x2 out of box each (42" SD)

101335 x2 out of box each (42" SD)

Blades may be compatible with more decks, this information is from what I have found so far

OBO

Modified 753 with modified sickle

Mon, 13 May 2024 17:36:43 +0000

Had this one sitting round for a few years don't need her.

Previous owner had landscape business and modified her. interesting mods. The front stuff is an electric hydraulic pump. Powers a WH cylinder that raises and lowers the cutter (Power up gravity down) he also modifies sickle. Replaced wobble box innards with an eccentric and pitman like big sickles.

I replaced the tranny with a 1" 8 speed gets the sped down to more appropriate rate for sickel.

Gas tank gasket seeps. No smoke. S/G works.

Will bring to big show

MVI_0972.MOV MVI_0975.MOV

Senior RS-83

Fri, 10 May 2024 12:10:47 +0000

What is believed to be a 1956 restored Senior. Engine usually a one or two puller & runs/drives as should. Needs throttle clamp relocated for improved response. Time for someone else to enjoy this beauty.

Pm with serious interest only please.

1970 GT 14 for parts

Mon, 06 May 2024 21:14:52 +0000

I had this tractor running last year and the engine blew. Quite sure it broke the rod. I had rebuilt the carb, rewired it and fired it up , adjusting carb and the engine let go. Has a replacement fuel tank. I never moved the tractor so I can't say anything about the hydro except it is there.

NOS plow / tiller bracket

Mon, 06 May 2024 13:47:04 +0000

I have a never mounted NOS snow plow bracket that was given to me for helping a gentleman sell his tractor here on Redsquare. I would like to trade for a nice sleeve hitch if anyone is interested. Otherwise , I’d like to get $100 for it.

P.S. I’d much rather have the sleeve hitch. Thanks for looking.