Classifieds: Classifieds

Rebuilt Kohler k321

Mon, 09 Mar 2026 22:02:27 +0000

Getting ready to retire after decades of rebuilding Kohler engines.
This is a K321 wheel horse spec long block plus the pan, head valve breather assembly. This engine has been torn down to the bare block cleaned and Bored .010 over, crank ground .010, valve seats ground, head decked.
New piston, rings, rod, valves, guides, seals and gaskets.
Located in Mechanicsville, VA.
800.00 no core required.
Photos of the rebuild are available if requested.

Wheel Horse D160 SOLD

Sun, 01 Mar 2026 23:02:38 +0000

SOLD: I put it away in December, ran fine, no smoke, didn't use oil. In February it wouldn't start, it had fuel, air, and spark, might be valve issue. I took to a small engine shop and they said it was .003 out of round/taper, but it ran good before. They disassembled the engine and told me it was going to cost way more than I wanted to spend so its for sale to anyone wanting to reassemble the engine or repower it. I has a rear 3 point, rear PTO, manual front PTO clutch, seat, both lift cylinders, hood, grille with working lights, rear tires and wheels are like new. If no ones interested I'll part it out on eBay

D-250

Sun, 01 Mar 2026 09:44:09 +0000

Starts runs and drives in all gears, hydraulic pump and cylinder work, needs TLC, asking $500, 60 inch mower deck needs blades asking $150. I have the other headlight. I have other D-250's priced between at $250 and $750 that start and run in all gears but hydraulic pumps do not work. They are currently stored offsite. Also have a roller and variety of spare parts available.

IMG_9441.MOV IMG_9442.MOV

C-81 8 Speed Wheelhorse

Thu, 26 Feb 2026 14:05:05 +0000

This has been sitting in my garage for 3 years and at this point I don't think I'll get around to putting in the time that it deserves to restore it. I'd love to see it go to someone who has the ability to restore it. I haven't started it so don't have too much insight into functionality. Will do my best to answer any questions... but eager to make some more room in the garage so happy to see it go.

314-H Excellent Condition

Wed, 25 Feb 2026 10:39:04 +0000

Selling this 314-H with only 138 hours. PO only used it to push snow on his short drive. It never even had a belt on the pto until I mounted a deck on it last summer. No attachments included. I will drive a reasonable distance (say about 4 hours round trip). I am not going to the big show but if you can work out a way to get it there I can hold it until then. Full documentation and some extras included.

I would consider a trade but you would really have to tweak my interest.

Something is screwed up with loading pictures right now so only one for now. The others errored out and this one took about 15 minutes to load.

92-6840 Blade Skids -used

Mon, 23 Feb 2026 00:30:53 +0000

Very nice , USED set of #92-6840 blade skids. Some wear but lots of life left. As found on the late model snow / dozer blades or drill some holes and adapt them to your older blade. $45.00 / shipped / continental US only. Private message me here or call / text during normal business hours ( DO NOT SEND AN EMAIL )

Charger 9 with Snow Blade - For parts or restore

Sat, 21 Feb 2026 18:51:58 +0000

For Sale - Charger 9 with hydro static drive and snow blade with frame.

Photo is from a few years ago. Since then I replaced the piston and rod. Reinstalled the engine but never got it up and running.

Hood and fuel tank are off as well as the sheet metal floor board. Snow blade and frame are separated from tractor.

Have original seat (upholstery is very bad).

My Mom bought this tractor in the mid 60's and my brothers and I mowed our two acres with it until we replaced it with at 312-8 in the 90's

Would like to see it go to someone who wants to get it running or needs parts.

It has the Tecumseh 10HP horizontal shaft engine with magneto. Hydro static drive. No mower deck. Tire Chains.

Location NE Ohio

Brinly B8-381 Box Blade

Tue, 17 Feb 2026 23:12:55 +0000

Here is a Brinly B8-381 box blade. it is in nice shape with a little rust but no rot. It is missing a few pins but otherwise complete. $225 OBO Also open to trades. Pick up in CT I am too lazy to ship.

SOLD: 1973 16 HP horse with FEL & weight box

Tue, 17 Feb 2026 00:41:07 +0000

1973 16 HP horse with FEL & weight box (box just sandblasted & painted) Seat has a single 2 - 3" tear, taped. It's got a (42?" ) deck & mule, and the FEL stands go with it.

I'm taking the new rear AGs & weights off and putting turfs back on.

Recent service includes trans service (Wix filter), oil change, new plug, new choke cable, carb cleaning, and FEL fluid change.

I also have a 2nd frame/body to include. Needs a headlight, I believe I have it. Driving lights on FEL.

NOTE: I need time for my hand/wrist to heal before I can swap the rear wheels and tires.

EDIT: I added photos of the wheels and tires that will go on the back of and a couple of partial photos of the repainted weight box.

Kohler K91, K181 and K341 Carbs

Tue, 10 Feb 2026 15:39:06 +0000

Three Kohler carbs.

K91 #18, c234253 The engine had a welded pulley on a tapered shaft on a 400. Engine was parted out.

K181 #22, 4147804 I believe it was original on my 854. The engine ran good but was very tired.

K341 #30, c275369 From the 341 I put on my 76 a gazillion years ago. Again, it ran good but was very tired.

All three would likely be fine as is but I would strongly suggest throwing a rebuild kit in them.

$100.00 shipped to you. USPS money order so I don't have to drive 37 million miles to cash it.

GT1800

Sun, 08 Feb 2026 12:42:28 +0000

1983 GT1800 tractor. New wiring. Front end replaced with tighter, low hour components. Have original engine. Too many projects. Good restoration project. PM for more details. Open to possible trades for good Onan engines.

D Series Part-Outs

Sun, 08 Feb 2026 05:08:24 +0000

I've got 2 D's I need to part out. Mostly complete tractors. 3pt is $350 shipped. The rest is TBD. I can get pictures upon request. I need enough interest to make it worth parting them out. Thanks for looking

Tire chains

Mon, 02 Feb 2026 18:44:00 +0000

Set of tire chains for 23-10.50/8.50 ×12. tires. Modified v-bar single link.

Free shipping.

Wheel Horse C-81

Sat, 17 Jan 2026 23:46:44 +0000

1978 Wheel Horse C-81 8 speed. Runs good. Has an original Nelson muffler. Both left side tires hold air for a couple days. Comes with the mule drive. Very open to offers as I need to free up space.

Wheel Horse D-160

Sat, 17 Jan 2026 23:40:36 +0000

Wheel Horse D-160 single cylinder, comes with deck. Runs great, starts right up at sub 20° temps. Looks like its got a bad leak, but she's in her working clothes. Open to offers.

20260117_172555.mp4

48" Deck Part Out

Thu, 15 Jan 2026 23:35:32 +0000

Tach-a-matic style 48in SD deck. All parts are available until further notice. Will ship to the lower 48.

Garden Tractor Narrow Front Wheels – 8” x 4” (Narrow Front Wheels, 4” Wide)

Mon, 12 Jan 2026 16:18:47 +0000

Garden Tractor Narrow Front Wheels – 8” x 4” (Narrow Front Wheels, 4” Wide)

These steel narrow front garden tractor wheels are hard to find, they were used on Wheel Horse, John Deere, Simplicity, Sears Suburban, & Cub Cadet small tractors.

They were sandblasted and epoxy primed years ago but now show a little aging from being in storage for years.

~~Asking $49.00 for the pair, O.B.O.~~ Sold!

Call Tim @ 1-313-460-8858

Wheel Horse / Garden Tractor - Carlisle Turf Saver Tires and 12”x 8” Wheels

Mon, 12 Jan 2026 16:15:19 +0000

Wheel Horse / Garden Tractor - Carlisle Turf Saver Tires and 12”x 8” Wheels

· Wheels – 12” x 8” Silver/Grey Wheel Horse Garden Tractor wheels, they are in good usable condition.

· Tires – Carlisle Turf Saver 23 x 8.50 – 12, they are in fair condition, good thread, but showing signs of dry rot. They are still usable.

Asking $49.00 for the pair, O.B.O.

Call Tim @ 1-313-460-8858

2 Carlisle Tru Power 23X8.50-12 tires for Lawn & Garden Tractors - NEW!

Mon, 12 Jan 2026 16:09:33 +0000

Carlisle Tru Power Bias Tire - 23x8.50-12

2 Carlisle Tru Power 23X8.50-12 tires for Lawn & Garden Tractors - NEW!

Lug AG Style for Garden Tractors

Great in the Snow & Mud.

FEATURES AND BENEFITS
• All-weather traction
• Self-cleaning tread
• Enhanced durability

Specs:
Brand - Carlisle
Size - 23/8.50-12
Rim Size - 12 Inches
Section Width - 8.5 Inches

These are New and have never been used, they are currently selling for $258.99 a pair on eBay & amazon, save yourself some cash $$$ and buy these.

They are currently mounted on 12"x8" garden tractor wheels from a Wheel Horse that have been sandblasted, epoxy primed and top coated with beige Rust-Oleum.

Asking $159.00 for the pair, O.B.O.

Call Tim @ 1-313-460-8858

Wheel Horse 48” Mowing Deck in Excellent Condition!

Mon, 12 Jan 2026 16:03:21 +0000

Wheel Horse 48” Mowing Deck in Excellent Condition!

This 48” Mowing Deck is in Very Good Condition, 3 Blades, Side Discharge, No Holes, or Rot.

It should fit all C & B Wheel Horse’s, but as it has been in storage for years.

This unit is in Great Shape with very little use.

Asking $149.00 O.B.O – Call Tim @ 1-313-460-8858

Wheel Horse 36” Snow Blower in Excellent Condition!

Mon, 12 Jan 2026 15:59:10 +0000

Wheel Horse 36” Snow Blower in Excellent Condition!

Model Number – 79362

Serial Number - 240000169

This Snowblower is in Excellent Condition, 36” Wide Single Stage with the Tall Discharge Shoot.

It should fit all C & B Wheel Horse’s, I do have the lift bar, but as it has been in storage for years, I do not have the handle for rotating the shoot or the drive belt.

This unit is in Great Shape with very little use.

Asking ~~$275.00~~ ~~$249.00~~ ~~$229.00 O.B.O~~ – Call Tim @ 1-313-460-8858 SOLD

C175 Auto - Chassis & Frames

Mon, 12 Jan 2026 15:52:50 +0000

I have two C175 Auto - chassis / frames

Description:

1 is a cleaned and painted frame, front axle and wheels, rear axle with Eaton 1100 Hydro, coms with a box of miscellaneous hardware from when I disassembled it for paint. Asking $59.00 O.B.O. (Note: comes as seen in photos)
1 is a mostly complete C175 Auto minus motor and sheet metal, has the Eaton 100 Hydro, dash, & wiring all intact. Asking $59.00 O.B.O (Note: comes as seen in photos)

If you're building or maintaining a C Series Wheel Horse, or needing a rear axle or Eaton 1100 Hydro, there is tons of usable parts on these two chassis & frames.

Open to reasonable Offers, Asking $59.00 Each O.B.O.

Call Tim @ 1-313-460-8858

Mid Mount Grader Blade

Mon, 12 Jan 2026 11:58:51 +0000

Can deliver to the big show if paid in advance, or pick up at my plow day

This is one attachment I’ll probably kick myself for getting rid of, because it works so grade!

Three position head, mid mount, works on long or short frame machines.

Wheel Horse SnowBlower with AG Tires and Chains...

Sat, 10 Jan 2026 17:15:46 +0000

Wheel Horse Snow Blower...Late 80s Vintage...Includes Belt, Lift Tube and Flag...Everything Turns Very Free....Included is a Pair of 23x8.50x12 AG Tread Tires...Tires are Nice with No Dry Cracking...Also Cones with Tire Chains...185.00 for the Package. Thanks.

42inch deck off 312-8

Sun, 04 Jan 2026 17:02:35 +0000

Deck is very rough. I will consider offers. Can help with delivery if needed, I do day trips on weekends. I will sell parts off the deck too. Please inspect pics carefully. Spindles turn, I broke them loose and greased on 1-3-2026. everything turns. I am up to horse tradin', I need all the engine tin for my 312-8 M12.

Set of 4 Chrome Hubcaps

Sun, 04 Jan 2026 15:22:27 +0000

Want to be the envy of all the other garden tractor and lawn mower owners on your street??
Got a show rig that just needs some BLING? Well here’s your chance. Do you go to shows? Buy these and be prepared to have to install a shelf in your man-cave to display all your trophies for having the coolest rig !
Set of 4 Wheel Horse hubcaps for 12” and 8” wheels. Not perfect but very presentable and will spruce up a machine for sure! All 16 clips on them, just cleaned and polished up so all ya need to do is pop em on and start being the coolest guy on the block! Showed a couple of the flaws in the pics.
Asking $120 for the set of 4…or best offer.
Local pickup or I could ship. No idea what shipping would be, maybe they’ll fit in a prepaid post office box?

Vintage Wheel Horse Sign

Wed, 31 Dec 2025 20:51:01 +0000

Vintage Lighted Wheel Horse Sign. 3ft. X 6ft. This sign has be displayed in my basement for over 30 years. I bought it from a wheel Horse collector who had it displayed for years in his pole-barn. No cracks

NOS 60s Hood

Mon, 29 Dec 2025 14:14:46 +0000

NOS hood for long frame 60s tractor. Been sitting around many years but never been installed on tractor. $50 located in South Haven, MI

Wheel Weights

Mon, 29 Dec 2025 14:09:30 +0000

Set of 4 cast iron wheel weights. $500 for set. Located in South Haven, Mi

WW-12 Weights

Mon, 29 Dec 2025 14:07:24 +0000

Pair of inside weights for 6-12 tires. $200 for pair located in South Haven, MI

Bronco 14 with Snow Plow

Mon, 29 Dec 2025 12:58:12 +0000

Good running and working Bronco 14 with 42” snow plow. Has had new style tach a matic bracket added to be able to run newer style attachments as well.

$1000 located in South Haven, MI

1056 with Snow Plow

Mon, 29 Dec 2025 12:54:47 +0000

Good running and working 1056 with 42” snow plow. In decent shape for its age. $800 located in South Haven, MI

GT14

Mon, 29 Dec 2025 12:51:40 +0000

GT14 in decent original shape. Has optional 3 point hitch. Just tractor, no attachments are included.

$1200 located in South Haven, MI

Suburban 401

Mon, 29 Dec 2025 12:48:41 +0000

Suburban 401 in excellent original condition, would take some searching to find 1 in same condition for sale. Runs and drives well, I rebuilt the transmission with all new bearings, bushings and seals when I got it around 10 years ago and was driven less then an hour.

$2000 located in South Haven, MI

Suburban 401

Mon, 29 Dec 2025 12:48:25 +0000

$2000 located in South Haven, MI

1955 Wheel Horse RJ35

Mon, 29 Dec 2025 12:42:35 +0000

1955 rj35 in original patina condition. Runs and drives as it should. Clinton engine was fully rebuilt and rear end gone through when I got it around 10 years ago, was driven maybe an hour in that time frame. Has rare factory cast iron hood nose weight.

Hard to find tractor, especially in this shape.

$4250 located in South Haven, MI

C175 Auto - Chassis & Frames

Sun, 14 Dec 2025 19:10:12 +0000

I have two C175 Auto - chassis / frames

Description:

1 is a cleaned and painted frame, front axle and wheels, rear axle with Eaton 1100 Hydro, coms with a box of miscellaneous hardware from when I disassembled it for paint. Asking $99.00 O.B.O. (Note: The Lug tires in picture Do Not Come With it)
1 is a mostly complete C175 Auto minus motor and sheet metal, has the Eaton 100 Hydro, gas tank, dash, & wiring all intact. Asking $99.00 O.B.O (Note: coms as seen in pictures)

If your building or maintaining a C Series Wheel Horse, or needing a rear axle or Eaton 1100 Hydro, there is tons of usable parts on these two chassis & frames.

Open to reasonable Offers, Asking $99.00 Each O.B.O.

Call Tim @ 1-313-460-8858

Kohler KT17 Engines

Sun, 14 Dec 2025 17:38:04 +0000

Kohler KT17 Engines

I have a total of 4 of these engines for sale, would like to get $149 for all four of them.

Description of each:

1 real good condition low hour, long block,
1 complete engine - ran when pulled, smokes, but rebuildable or used for parts.
1 complete engine - ran when pulled, smokes, but rebuildable or used for parts.
1 complete engine - believe it has a broken camshaft, but rebuildable or used for parts.

Defiantly enough to build one good engine with the good long block and other parts engines, lots of spare parts including carburetors, intakes, flywheels, starters, & ignition parts.

As I'm Cleaning out the garage, purchaser must take all four engines.

Call Tim @ 1-313-460-8858

C 111 For Sale (project)

Sun, 30 Nov 2025 20:14:19 +0000

IMG_9039.HEIC IMG_9039.HEICIMG_9039.HEIC IMG_9042.heicIMG_9042.heicIMG_9042.heicIMG_9042.heicProject started but unable to finish. The small Briggs that is mounted was used for moving the project around and is included, it started and ran a couple of years ago, but has not been started recently. Please refer to pictures. I am happy to answer any questions to the best of my ability. I am not familiar with Wheel Horses. The numbers on the engine that was on the tractor are as follows: Engine model 252417, Type 0198-01 Code 79031511. Internet look up stated 399 cc, single-cylinder, 4-stroke Briggs & Stratton 252417 — roughly 11 HP, horizontal-shaft, air-cooled, side-valve.(see last picture). I will post better pictures of that engine. Thanks. Pickup only.

IMG_9011.HEIC IMG_9012.HEIC IMG_9017.HEIC IMG_9021.HEIC IMG_9022.HEIC IMG_9025.HEIC IMG_9024.HEIC

IMG_9039.HEIC

6 inch wheelhorse hub caps

Sun, 30 Nov 2025 17:40:10 +0000

I have a set of 6 inch hubcaps that are in really good shape.

150

Wheel Weights

Wed, 26 Nov 2025 23:12:37 +0000

Here is a set of 55 lbs. Craftsman wheel weights for 12" rim tractors. They were on a Wheel Horse and should fit John Deere's also. $75 OBO

48" SNOW PLOW, COMPLETE WITH REAR MOUNTING BRACKET

Mon, 24 Nov 2025 01:21:45 +0000

HORSE 48" SNOWPLOW, FITS 4 AND 5 SERIES TRACTORS / SOLD

Sales display board items

Mon, 17 Nov 2025 18:30:40 +0000

Sales Display Board items:

Tire pressure gauge #111029
Belt buckle #115034
Dome washer & bolt kit (pkg of 3 each) #111024
1969-1979 36" mowers
1965-1977 42" mowers
1963-1977 48" mowers
242 threadlock #111025
Multi-service lithium grease cartridges #115020
4"x6" mirror

Shipping includes if continental US.

Contact me if you have any questions.

Thanks,

Joe

857 & Commando 8

Sun, 16 Nov 2025 21:10:10 +0000

I'm offering a deal for you redsquare folks. I have an 857 with a plow and a commando 8 with a deck priced to sell at $600 for the pair. They aren't perfect by any means but they start right up and drive. The commando 8 has a transmission that was expertly rebuilt by steveasaurus!

44" Two Stage Snowthrower

Sun, 16 Nov 2025 20:07:46 +0000

condition: good

/ manufacturer: Wheel Horse / Toro / Wheelhorse

model name / number: 44" Snowthrower / 70361

For Sale: Wheel Horse / Toro Two Stage 44" Snowthrower. Model number 79361, Model year 1994.
Works well, all parts, manuals, spare drive belt.

1992 WH 416-8

Wed, 05 Nov 2025 05:01:51 +0000

*16 HP Onan Engine, 665.4 Hours
*8 Speed Transmission
*48” Snow Plow- Works Great! Set up and READY TO GO BEFORE THE SNOW!
*Nice 42” Mowing Deck, no rot or welds, smooth spindles
*OEM Wheel Weights, 50 lbs. Each
*Chains
*Valves adjusted this summer, runs great!
*Good battery
*Tires All Hold Air
*LED lights all the way around
*Manuals included

Bought a Honda tractor with 4WD and 4WS with deck, plow and snowblower so I don’t need this tractor.

Cash Only!
*WILL NOT RESPOND TO “IS THIS STILL AVAILABLE?”

*COMING SOON: Also selling a Wheel Horse 520H with a 2-Stage Snowblower. Check out that listing if you want a snowblower garden tractor!

520-8 original

Wed, 05 Nov 2025 02:58:06 +0000

This is an original 520-8. It was sold and serviced at Lincoln Rental in Rockford illinois. It comes with a 48" mower deck and 48" front blade and a Snow blower. It has 645 hrs on the hour meter. Price is OBO. Only 225 were made.

GT14

Wed, 05 Nov 2025 00:42:02 +0000

This is a tractor that was purchased during Covid to teach some shop classes to a buddy’s kids, then they ended up buying the machine. The balance gears have left the chat. I have a spare K301 engine I’ll toss in with it. The Nelson muffler will not go with the donor engine. The oil pans will need to be swapped, of course. Three point lift included!

C120 Auto Mid 70's with snow plow

Thu, 30 Oct 2025 18:56:22 +0000

C120 Auto Mid 70's with snow plow

Strong Hydro w/good axle hubs, Kohler Engine that runs good but will puff some smoke out when revved up.

Runs plenty good for snow pushing and yard cart duty.

I would consider trade for xi stuff.

Send a pm with cell number for a short running video.

97 Mid mount grader blade #79351

Tue, 21 Oct 2025 02:52:50 +0000

97 mid mount grader blade - po used on stone drive so paint worn off but edge good - comes with lift link

Pick up only