Classifieds: Classifieds

"Gator" style mulching blades-42" side

Wed, 24 Aug 2022 02:29:41 +0000

Set of 3 , brand new Gator style mulching blades for the 42" side discharge decks utilizing the 3/4" center hole. Price is $75.00 shipped / continental US only. Cash, check, money order, or Paypal friends and family. Private message me here, or call / text during normal business hours.

42" Tall Chute in CT (1995)

Tue, 23 Aug 2022 11:59:02 +0000

Came with a package deal I already have one. It comes with every thing needed to mount it.

48"SD Deck

Mon, 22 Aug 2022 13:38:26 +0000

Good blades and spindle housings no holes and quiet bearings. Just used a few days ago. Possible trade for a nice 42" SD deck. It has been repainted.

Front axles Tall

Mon, 22 Aug 2022 13:28:59 +0000

Super nice set of tall front axles. Removed from a 310-8. Will need paint because most of the paint came off during cleaning.

CH15S 229 Hours (revised)

Mon, 22 Aug 2022 11:27:19 +0000

Removed from my 2004 315-8 after the electric clutch self destructed. The motor is perfect in every way. I was wrong in my original post regarding the stripped bolt and crank. I went back and checked again and realized I was wrong. (see pic) I converted the tractor to an old school Magnum. Sorry no shipping

314 hydro

Thu, 18 Aug 2022 14:48:13 +0000

96 185hrs choice of 48"deck or a 42"rear almost a new tractor serviced weights don't go with it

520-8

Tue, 16 Aug 2022 22:49:18 +0000

520-8 original tractor, not a clone. Has 2300+ hours but the motor sounds very good, no smoke or knocks and runs fine after it’s hot, starts quickly. I would guess this motor has been replaced at some point or it has been taken care of very well as it sounds/runs as good as any 500-1,000 hour 520 I’ve had. Left rear tire has an extremely slow leak and it could use new rear tires but they do hold air. 8 speed works great. Paint is average for a 520 of this age, some cracks peeling and light surface rust around the edges. Has new front tires just put on last weekend and new fuel lines & filter. $900 firm located just east of Columbus, IN 47203 (can arrange help delivering around Midwest Monday-Friday if you’re not in a hurry). Will hold with PayPal f&f payment or Venmo. My phone blocks unknown calls so leave a message or send a text before/after you call.

Briggs/Stratton 16 hp. SOLD

Tue, 16 Aug 2022 19:28:33 +0000

Briggs / Stratton 16hp I/C currently on a C 195. Runs great. 100.00

1988 310-8

Thu, 01 Jan 1970 00:00:00 +0000

The 42 inch mower deck is in very good condition, the bearings run free and quietly. Good battery. No smoke. Hood needs to be adjusted, because when it's fastened down, it prevents the throttle lever from moving fully open. Seat is taped on the sides but usable. There are some dents in the right fender. The volt meter is inoperative. There is no hour meter, so the hours are unknown.

The biggest issue is a problem in the safety switch circuit is preventing it from starting. It's almost certainly a loose/corroded/dirty connection or a bad safety switch. With the circuit bypassed, it starts and runs just fine. I can bypass the circuit to demonstrate the tractor, but since I won't sell it with the safety switches bypassed, I'm selling it as a non-running tractor.

Kohler Magnum 10 hp

Wed, 10 Aug 2022 02:00:59 +0000

We have for sale a complete, strong running Kohler Magnum 10 hp engine. See photos for model and serial #'s and also a short video of engine running. Carb shafts are tight, customer stated that it had a fresh set of rings about a year ago. Price is $200.00 cash at time of pickup. Located Sunbury, Pa. 17801. If interested, message me here or call / text during normal business hours. No shipping on this item.

20220703_173959[1].mp4

FREE 416-8 and C105 FPNW

Tue, 09 Aug 2022 14:09:58 +0000

These Wheel Horsies were given to me by an elderly gentleman who was being pestered to get them out of his garage. I didn't need them but hauled them away as a favor. Both tractors are a bit rough. The 416-8 is missing the carb. (previous owner removed it to overhaul it and lost it)

The seat pan on the 416-8 is rusty but there. The seat pan on the C105 is cracked and broken (surprise surprise) it is, however, all there.

There's a loose hitch and two mule drives. Free to a good home or they'll have to be discarded.

~Bill Winn

50" 5xi & Long Frame Grader/Belly Blade

Mon, 08 Aug 2022 23:54:58 +0000

50" grader/belly blade that originally was on my 520xi and then on my C165. How you may ask? Well, It has a second mounting rod welded in front of the 5xi mount so it also fits C/3/4/5 series tractors as well. In addition to that, it has a removable wear bar/cutting blade on one side of it so you'll have long life out of this without flipping the blade over. New paint was applied a few years ago but has wrinkled in a few places over the years despite it only being stored inside. Not a deal breaker if you ask me. I frequently travel to Grand Rapids, Marshall, and Dowagiac so I could meet up along the way. Thank you for looking! $400

Rear Bagger System

Mon, 08 Aug 2022 23:36:10 +0000

Here is a complete and fully functioning bagger system from my 520H and 48" deck. The only downside to the bagger system are two small holes in one of the bags which could very easily be patched up with some duct tape of your favorite flavor. The drive pulley on the deck can be yours if you can remove it. You get the bagger frame, two bags, impeller assembly, deck bracket, chute and the bracketry that attached the bags to the rear of your tractor. I've been told this system will also work on 42" decks but please confirm that. I live in Kalamazoo but frequently travel to Grand Rapids, Marshall, and Dowagiac, Michigan. Thank you for looking!

Wheel Horse Parts Lot....

Sun, 07 Aug 2022 17:37:41 +0000

Wheel Horse Parts Lot....1 Mule Drive w/Belt , 1 Muffler Heat Shield , 1 Pair 42" SD Deck Covers , PTO Clutch Disk , 2 Implement Cable Tubes , 1 Deck Height Adjuster , 2 Seat Gas Tubes....All Parts in Good Useable Condition...85.00 Takes All...Pick Up Only. Thanks.

Wheel horse rj-58 barn find

Sun, 07 Aug 2022 03:13:03 +0000

1958 Rj-58 serial # 6749 with tag intact .

This came from a gentleman his uncle owned it since new . It was driven into the barn running, and put up on the shelf 14 years ago . It has great compression and spark . I haven’t dug into it any further . One front rim has some bad pitting / rust , air cleaner was missing .

$750

can assist with shipping

location : Clarksville Tennessee

(860) 681-3610

Kohler K241 10hp complete & nice $200

Mon, 01 Aug 2022 22:23:01 +0000

Kohler k241 10hp - originally off one of the "C" Wheel Horse tractors from mid/late 70's and is complete to bolt right back on to a WH. Course this engine fits MANY other applications.

Bought tractor with this engine running, but had 16hp that I wanted to replace it with. Sat engine in corner some 10yrs ago, and finally decided to ck it over and if good sell it. Opened engine up and inspected/measured components .... quite a surprise! Crankshaft factory spec is 1.50, this measured at 1.4999!! -- Cylinder spec is 3.250, this measured at 3.250!! This is a NICE engine. Bought new gasket set and put it back together.... (coil not orig, no carb filter or flywheel screen)

Obviously shipping would be $$$ --- I'm located near Shreveport La (bout 5 mi from Tx line & 50 mi from Ark)

Can hear it run.... Asking $200

42” Rear Discharge Mower Deck for E-141

Sun, 31 Jul 2022 17:46:37 +0000

42” Rear Discharge mower deck for E-141 electric tractor. Blades are driven by three electric motors. Will not work with belt.

Excellent condition. Runs and cuts as it should.

$250 firm.

PM me if interested. Pick up only. SE Michigan.

***Decided to keep it - no longer for sale***

520-H with tiller for sale

Sat, 30 Jul 2022 15:59:15 +0000

Newbie here and I have a 520-H that runs, but needs some TLC and some minor things fixed and/or adjusted. It comes with a like new tiller that I believe has only been used once and has paint still on the tines. I am the 2nd owner and I have personally never used the tiller. I am selling my previous home that I rent and where it has been stored. My current home's yard just isn't big enough to use a rider and I need to find a new home for it. I want to sell them together to simplify and I need them gone in the next 2 weeks. Please reach out with any questions and I'll do my best to answer. I am definitely not as knowledgeable as most of you on this forum, but figured somebody would like to fix it up, part it out and/or needs a tiller. Please email or text.

seat pan&seat

Tue, 26 Jul 2022 22:45:22 +0000

pan is a little rusty but solid seat is new never used

RJ 59 for sale

Mon, 25 Jul 2022 20:52:22 +0000

Friend found this in barn, unused for over 25 years - was family mower before that. Pics show current condition, all cleaned up. Has all engine shrouds, primary drive belt guard, exhaust guard (only pictured in barn find shot) New muffler and exhaust. new sediment bowl, pep-cock and fuel lines. Carb rebuilt. New primary drive belt. Starts, Runs, Drives, Turns and Stops. Will wheelie in 2nd/3rd gear. Original Kohler K91 engine. Mower deck is still untouched - looks complete except for PTO belt guard. Last pic shows original barn condition.

I need the room. I have 7 other machines and although this one is pretty cool, the others have more use to me.

Wheel Horse cart

Mon, 25 Jul 2022 13:00:35 +0000

I have a Wheel Horse model 7-2211 yard trailer for sale. This trailer Has been repainted by the previous owner. It is not a show piece but with that being a said it is a solid trailer that would be a good worker. This trailer would be great for someone that wants one that looks decent and isn’t afraid to use it like it should be used. My price is O.B.O. for it. Feel free to ask questions and I can send more pics of it through text or email. I prefer texting or email but will accept calls on it.
Thanks-

Tristen

Tecumseh H60 cam and flywheel

Sat, 23 Jul 2022 22:57:51 +0000

I found these laying around in the shop from an H60 that I parted out...

These are the last 2 parts from the engine.

Cam and flywheel both are in excellent condition...

1971 Wheel Horse Bronco 14

Sat, 23 Jul 2022 18:26:19 +0000

I was planning on restoring this 71 Bronco after I retired. However, we have decided to move south to be closer to our daughter and I will have no need for the mower/snow thrower there. My late father purchased this Bronco new in 1971 and we used it mainly for snow removal. It has been sitting in my shed for several years and has a lot of surface rust, but I am certain anyone with a little skill can get it sanded and repainted to that beautiful Wheel Horse red! Tires hold air, everything works, even the cigarette lighter. I do think the carb either needs adjusted, or more likely rebuilt, as it spits and sputters a little. Everything is original that I am aware of with the exception of a couple nuts and bolts. I recently replaced the air filter, fuel filter, and changed the oil. That is the only maintenance I have done. The enclosure needs a little work on the vinyl (mostly the front piece) and the plastic windshield is cracked. Other than that, I have all the pieces to the attachments - at least whatever was in my dad's yard barn when I took it out to bring it to my house. I MAY have overlooked the hubcaps, but I really don't recall ever seeing any on my Bronco. I will look again.

Misc Horse Parts

Wed, 20 Jul 2022 13:56:47 +0000

Shown are random used refurbished horse parts.

Buy one or all.

753 With Snowblower

Mon, 18 Jul 2022 11:41:34 +0000

Wheel Horse 753 with snowblower attachment. Runs and drives. Has nice hood. Someone has installed transmission from newer model so it has longer rear axles and larger drive pulley making it drive slower.

Asking $750 located in South Haven,MI

Will sell snowblower attachment seperate for $200 but tractor is not available without it.

1973 GT14 Package

Sun, 17 Jul 2022 20:34:15 +0000

1973 Wheel Horse GT14 package includes tractor with 3 point hitch, mower deck, rear tiller for 3 point, dozer/snow blade, soft cab and box of assorted pieces parts. This project has been fighting with me and I'm out of time and patience due to other more pressing projects. Engine will fire if fuel is poured into spark plug hole, so it does have spark. No battery. Package deal only. Cash only, no trades. $1200 obo.

1997 Toro Wheel Horse 520-H

Fri, 15 Jul 2022 23:24:47 +0000

Selling my 520-H. It runs great and everything works as it should. It has 409 hours. Comes with a 48" Deck which cuts quietly.

Awesome 520H with snowblower, cab ++

Thu, 14 Jul 2022 19:37:26 +0000

Awesome 530H with a 42” rear discharge deck, like new 2-stage snowblower, mid mount grader blade, plow(s) and a like new full cab enclosure- in PA still to be picked up, wheel weights as seen in the pics and a custom heavy duty full-size receiver hitch from Wheel Horse Parts and More, new At tires. I love this tractor but just had the opportunity to get a Bolens compact tractor/loader but don’t have the room for both and need to recovers the money from buying both.

I won’t have the cab for a few weeks, bought and paid for but still sitting in PA, so would sell everything for 2400 less cab then I’ll sell the cab for an additional $500, exactly what I paid for it, separate when I pick it up.

I will find and get another but maybe something like an 857 with less features and electrical stuff

Wheel Horse C-105

Thu, 01 Jan 1970 00:00:00 +0000

Selling my Wheel Horse C-105. All original paint besides wheels. Runs excellent.

Cast Iron Rear Wheel Weights

Sun, 10 Jul 2022 19:40:02 +0000

Price is for pickup. Will ship for $300. Prices are firm.

416-8

Fri, 08 Jul 2022 04:39:33 +0000

91 800+ hrs 42"deck has a patch will include another deck serviced runs good

K161 Tins

Thu, 01 Jan 1970 00:00:00 +0000

K161 Tins in excellent condition

K161 cast iron exhaust manifold and muffler

Thu, 01 Jan 1970 00:00:00 +0000

Cast Iron exhaust manifold with muffler. Muffler has a couple of holes in the grid.

K161 Early Recoil Pull start w/ Cup

Fri, 08 Jul 2022 02:27:36 +0000

K161 Recoil Pull start W/ cup. Very little wear and teeth in very good condition

K161 Carter N #20 carb with oil bath air cleaner

Fri, 08 Jul 2022 02:15:55 +0000

K161 Carter Model "n" #20 carb in good condition with misc rev limiter parts.

Tall Chute Snowblower

Tue, 05 Jul 2022 12:16:17 +0000

Tall Chute single stage snowblower. Has worm drive chute control. Has lift rod as well. Chute is currently detected for storage.

'72 Raider 10

Mon, 04 Jul 2022 22:11:30 +0000

Original Raider 10 in good shape, runs good. Recent belts, new PTO friction plate. Includes 36" mower deck, mule.

1966 L156 LAWN RANGER

Mon, 04 Jul 2022 18:49:59 +0000

Started restoration about 3 years ago and never finished. Everything has been sand blasted, sanded, primed and painted except for engine, wheels and some small parts. All original including Tecumseh H60 6hp engine. Engine has new points, condenser, spark plug, oil, and muffler. Carb was rebuilt as well. Runs good and starter works good also. Everything has been stored in barn and not put back together. Tractor is missing the seat, mower deck and has no tires. I have more pics also

C175

Mon, 04 Jul 2022 01:44:27 +0000

wanted seat pan for a C175

Cab enclosure for 520H

Sun, 03 Jul 2022 22:43:53 +0000

Not sure if it is something that I could swing at the moment but the last thing I would love to add to my 520 is the enclosure. Let me know if you have one and how much thanks

1977 C160 Automatic

Sun, 03 Jul 2022 14:29:07 +0000

1977 C160 Automatic Tractor. This has been my go to tractor for over 30 years. Not a show tractor by any means. Could definitely use a tune up but still runs and mows. Included are original manuals, 2 mowing decks, cab ( which needs all the windows replaced) including the doors and tire chains. Someone modified the plow so it doesn't really fit this tractor. I purchased a larger machine so do not have a need for this. Hydraulic lift is not working. One front tire has a slow leak. Open to offers. Thought I had this sold but it was someone trying to scam me with a phony cashiers check. Please be careful. This is the only site I have this listed so the scammer must be monitoring these ads. Sold the rototiller. So adjusted the price.

C series fender bracket above tool box

Sun, 03 Jul 2022 05:14:34 +0000

I'm looking for a c series fender pivot bracket?

The part that hooks the seat to the tool box.

This is for a model # 1-0481. 1975 C160

Thanks,

Cory

Wanted; wheelhorse 315-8 control panel

Thu, 01 Jan 1970 00:00:00 +0000

Looking for a 315-8 control panel in nice shape . Mine is really pitted with rust to the point that it’s beyond repair . This style control panel is pretty hard to find with the (2) rectangle holes . Willing to pay a fair price . Toro P/N: 104-2470-03

New Holland/Wheel Horse 60" Side Discharge Mower Deck

Sat, 02 Jul 2022 21:19:36 +0000

Good used New Holland/Wheel Horse 60" Side Discharge Mower Deck

Bearings seem to be nice and smooth.

It's missing the grass chute (deflector).

I don't think this will fit the older Wheel Horse tractors like the 520H, without modification anyway.

Gauge wheels in the front are bad.

Component # 715667006
Serial # T0BG00001

Fits 520xi & NH GT20 & GT22

Wheel Horse Part #78395

In search of HL-5 Kit

Sat, 02 Jul 2022 00:28:14 +0000

I would be interested in the kit or even just the 5/8" tube.

Miscellaneous Wheel horse parts

Thu, 30 Jun 2022 14:25:27 +0000

I didn't use or even recognise some of these items. Wheel weight bolts, 420 armrest and bracket?, some deck items

and hitch accessories. $85 includes flat rate shipping to 48 states USA.

Tall chute snowblower

Thu, 01 Jan 1970 00:00:00 +0000

42” single stage snowblower for sale. Has the side wings, new chain, auger gear, and idler gears. Also comes with lift flag. Great overall condition. $200/bo I can supply other pictures by email.

314-8 with 42" Rear Discharge Mower

Wed, 29 Jun 2022 13:13:59 +0000

314-8

14hp Kohler Magnum Cast Iron Engine-Runs excellent

Heavy duty 8-Speed transmission with Hi/Low Range

Headlights work

42" Rear Discharge Mower Deck-good bearings

789 hours

New front tires

Here is a YouTube link of the engine running.

Wheel Horse Chrome Hub Caps - Set of 4

Tue, 28 Jun 2022 17:49:03 +0000

Set of 4 Wheel Horse chrome hub caps. Two 10" and two 8" (full set). These are off my old 520-H that I no longer have. Been in storage for years. One of the smaller hub caps has some small pitting with some rust, otherwise normal wear and tear including some scratches. See pic's. No longer have a need for these so rather see them go to use on somebody's wheel horse.

wheel horse part number # 6710

Thu, 01 Jan 1970 00:00:00 +0000

I am in the need of a part for my 1969 charger 10 ; the part number is #6710 it is the latch and shaft assembly 'plus if it is possible a used and working throttle cable as the aftermarket ones are a pain to cut and make them fit so if any other member might have these items, I would appreciate it