Classifieds: Classifieds

60” mower deck

Thu, 08 Sep 2022 17:02:41 +0000

Very good condition 60” deck with proper mule pulley too. Mule needs 1 bearing and finish work on the cover restoration. Deck is missing front anti-scalp roller. Blades are very nice and spindles feel great. I have owned it for 5-6 months because it came with the 520 that I bought. It is just too much deck for my shed and 1/2 acre. I have many more pictures for those that are interested.

1993 520h

Wed, 07 Sep 2022 15:56:03 +0000

i have a 1993 whorse 520h in very good condition with extras, stored in heated garage and well maintained, 20 horse onan engine, 760 hours, comes with sno blower, mower deck, sno blade, dethacher, lawn plugger, tank sprayer, trailer and bagger, everything works as it should

IMG_0473.MOV IMG_0471.MOV

44" Mower Deck for Xi Series Tractors. Basically New

Tue, 06 Sep 2022 17:27:51 +0000

44" Mower Deck for Xi Series Tractors. Side discharge. Basically New, used a couple of times when new then put in storage. The pictures speak for themselves.

$950. Pickup in RI. May ship is arrangements are made by buyer.

1997 314-8 w/ 42" side discharge mower

Mon, 05 Sep 2022 21:29:04 +0000

1997 314-8 with 42" side discharge mower deck. Runs great. Excellent condition. Original owner. Going out by the road for a garage sale next weekend, but I wanted to give the forum users first shot at it. Message me if you're coming from far away and want to hear and see it run via facetime, etc.

Ken

1973 8hp 4spd ( "Horse with no Name")

Mon, 05 Sep 2022 16:57:46 +0000

Nice little tractor with what I think is original paint! I just acquired it from a relative and it had been sitting idle for an unknown length of time. I put a new battery in it, new spark plug, new air and gas filters, new gas in the bone dry, clean plastic tank and it fired up after a few revs. Runs smooth with no smoke and handles the 36" deck with no problem! It now has new oil in the engine, new grease in the trany (after 3 flushes with diesel fuel), new idler pulley on the drive belt, new "Genuine Wheel Horse" blade set and this little gem is ready to mow! The only new paint on the tractor is the rear wheels, which were black when I got it! I bought this tractor after taking the deck off to check it out for rust and holes, found none and that is rare, so I new this unit could be brought back to life for another 50 yrs!

0B8D6FAF-52F3-4ED2-BD09-B84879A1C4FB.MOV

96 Wheel Horse 520H

Sat, 03 Sep 2022 23:20:55 +0000

96 520H includes rear weights and reconditioned 48" deck with all new hardware including belt and blades. Tractor has been gone through from top to bottom. Changed all fluids and filters. Decarboned heads with new head gaskets, exhaust gaskets and intake gaskets. New plugs and accelerator pump in carburetor. New air filter and fuel filter. Readjusted valves and resales intake. New front tires not on, but included with sale. Rear tires are new. The only thing not working is the tachometer gauge. Most fasteners have been upgraded to stainless fasteners.

1975 WH C160

Sat, 03 Sep 2022 17:51:45 +0000

1975 C-160
Runs and moves good.
Smokes on start and clears up.
New plug
Newly rebuilt carb with OEM kit.
New fuel filter
New engine oil
New Trans filter/fluid change
Nice front chrome hub caps
Tractor only
Can come with 75# weights for extra and does not come with 55# weights in pics
Front Axle was reamed and New bushings installed. Very tight.
New heim style tie rods.

It is NOT orange like pic. In person it's red.
Does not come with plow or custom hitch. Tractor only.

1989 Wheel Horse Magnum 312-8 42” deck

Sat, 03 Sep 2022 14:52:00 +0000

I received a 1989 Wheel Horse 312-8 Magnum from my brother-in-law’s father who bought it brand new in 1989. When I got it it would not start but was in good shape still, original headlight still shine bright! I cleaned it up and replaced a bunch of parts (starter solenoid, battery, fuel pump, fuel line, fuel filter, cleaned the gas tank, air filter, spark plug, mower deck belt) and got it working for a bit, but it continued to die again. I looked over all the wiring and surprisingly it all seemed in contact and not chewed up by mice. I unfortunately don’t have the time and space to hang on to it anymore. When I put a little gas in the carburetor it starts right up so I think the problem lies somewhere within the fuel pump. I would rather try and sell it to someone who can get it going again before scrapping it as these machines are gems. I am in the Buffalo, NY area.

Fully restored 42" Recycler deck # 1542RC02

Fri, 02 Sep 2022 01:40:29 +0000

We have available a completely restored 42" Recycler deck, # 1542RC02. Starting with a super clean, solid , original Recycler deck, all pieces were sandblasted, the carrier assembly , rear axle assembly, and Recycler insert were powder coated for durability. The deck shell was epoxy primed and professionally painted and baked on using all top of the line PPG products. The underside of the deck was sprayed with an industrial grade bedliner material which is hard and durable ( not thick and rubbery like many spray in liners ). All the wheels, rollers, bearings, nuts, bolts, hardware, springs, bushings, correct Recycler blades, belt, etc. are brand new. This is essentially a better than new deck with a much higher quality / more durable finish than new. Put this on your show quality restored Horse or put it to work for another 30 years. This is arguably the best cutting deck that Wheel Horse or Toro ever offered for these vintage tractors. If you maintain your lawn to a high standard and cut regularly these are fantastic decks. If you normally cut grass that is 4" or higher this is not the deck for you. the price is $850.00 cash only at time of pickup. NO SHIPPING will be offered on this item ( again- NO SHIPPING) . Private message me here anytime, or call / text during normal business hours with any questions (do not email- it does not get checked regularly)

C-125 / plow / 42" rear discharge desk

Wed, 31 Aug 2022 20:20:11 +0000

Looking to sell my C-125 rider with long frame plow and 42" rear discharge deck. Do not use anymore and just want to move it out of my garage. $900 or best offer. Ran great when I parked it last year, battery needs to be charged. In Rome NY - call or text 315-725-1764

2004 315-8 Harness

Wed, 31 Aug 2022 11:25:52 +0000

Removed from my 315 because I did a Magnum swap. It had the Command motor with an electric clutch which self destructed. The harness has no cuts or breaks.

Terry Keefer

Mon, 29 Aug 2022 16:35:17 +0000

Wheelhorse C160 Automatic tractor, new rear tires & tubes filled with windshield washer fluid, rear wheel weights, fuel pump rebuild kit installed past winter, 36” side discharge mower deck with bagger, 36” rear discharge mower deck and 42” angle snow plow. Tractor and hydraulic’s work great. Oil in engine & transmission changed yearly. Garage kept. $1500

Wheel horse attachments - priced individually

Mon, 29 Aug 2022 10:50:58 +0000

Bought a wheel horse garden tractor and it came with some attachments. I own most of these already, so Looking to sell off what I dont need

1. 48" side discharge mower deck. Its in good shape, needs a good cleaning. Spindles seem tight, and belt is in good shape. Includes the mule drive. Asking 175 or best cash offer

2. 38" snowblower. Old style, short chute. Spins freely. Has belt with it. Chute rotation is there, but needs adjustment or a really good cleaning. Asking 50 dollars or best cash offer

3. 2 front plows with brackets. 1 plow is complete, the other plow needs some parts to be complete. Asking 125 or best cash offer for BOTH plows w/ brackets

Will condsider trade for a nice tall chute snowblower or a mid mount grader blade all prices are "best cash offer" If you see something you like, or need it for parts, make offer. (everything is heavy, bring help to lift, and dont show up with a compact car to load it into)

C161

Sat, 27 Aug 2022 18:29:07 +0000

Runs good. 16hp hydrostatic. New front tires. No attachments

Wheel Horse 416 - Hydro Tractor with 48" Deck

Fri, 26 Aug 2022 01:18:27 +0000

Wheel Horse 416 - Hydro Tractor...I believe its a 1997 Model....16hp Onan Twin Cyl. Engine...Eaton 1100 Hydro Trans and Hydro Lift....869 Hours on Working Meter....This is a Barn Find Tractor...It was Parked in a Barn and has been Setting for Over a Year....I have Cleaned it Up and Put in Fresh Gas....It Starts Quickly with NO Smoke or Noise but will Definately Need Carburetor Cleaned....It Surges and Stumbles at Idle but Runs Decent with Choke Pulled Out a Quarter of the Way....Engine Oil was Clean and Full....Hydr OIl was Clean and Full...Comes with a NOS Hydro Filter....Included is a 48" SD Mower Deck and Mule Drive.......The Deck is Probably Just For Parts as the Deck Shell is Bad....Battery Does NOT Go with Tractor......500.00 Takes All.....Thanks.

Fully restored 42" side discharge deck - #78345

Wed, 24 Aug 2022 03:05:05 +0000

We have available a completely restored 42" side discharge deck, model # 78345. Starting with a clean solid deck, all pieces were sandblasted, the carrier assembly and rear axle were powder coated for durability. The deck shell was epoxy primed and professionally painted and baked on using all top of the line PPG products. The underside was then coated with an industrial type bedliner which is hard and durable (not thick and rubbery like many spray in liners ) . All the wheels, rollers, bearings, nuts, bolts, hardware, springs, bushings, bearings, blades, the belt, are brand new. This essentially a better than new deck with a much higher quality / more durable finish than new. Put on your showroom quality restoration, or put it to work for another 30 years. Price is $850.00 cash only at time of pickup. NO SHIPPING offered on this item. Private message me here, or call / text during normal business hours with any questions. DO NOT EMAIL (it doesn't get checked regularly) , and again I am not shipping.

NOS 12"-8" Chrome Hubcaps

Wed, 24 Aug 2022 02:40:21 +0000

New old stock hubcap set, fits 12" rears and 8" fronts. These are brand new, showing slight shelf wear ( one of the fronts has a scratch thru the center, and one of the rears has some light surface scratches that will hardly be noticeable when installed ). Price is $185.00 / shipped / continental US only. Cash, check, money order, or Paypal friends and family. Private message me here, or call / text during normal business hours.

"Gator" style mulching blades-42" side

Wed, 24 Aug 2022 02:29:41 +0000

Set of 3 , brand new Gator style mulching blades for the 42" side discharge decks utilizing the 3/4" center hole. Price is $75.00 shipped / continental US only. Cash, check, money order, or Paypal friends and family. Private message me here, or call / text during normal business hours.

42" Tall Chute in CT (1995)

Tue, 23 Aug 2022 11:59:02 +0000

Came with a package deal I already have one. It comes with every thing needed to mount it.

48"SD Deck

Mon, 22 Aug 2022 13:38:26 +0000

Good blades and spindle housings no holes and quiet bearings. Just used a few days ago. Possible trade for a nice 42" SD deck. It has been repainted.

Front axles Tall

Mon, 22 Aug 2022 13:28:59 +0000

Super nice set of tall front axles. Removed from a 310-8. Will need paint because most of the paint came off during cleaning.

CH15S 229 Hours (revised)

Mon, 22 Aug 2022 11:27:19 +0000

Removed from my 2004 315-8 after the electric clutch self destructed. The motor is perfect in every way. I was wrong in my original post regarding the stripped bolt and crank. I went back and checked again and realized I was wrong. (see pic) I converted the tractor to an old school Magnum. Sorry no shipping

314 hydro

Thu, 18 Aug 2022 14:48:13 +0000

96 185hrs choice of 48"deck or a 42"rear almost a new tractor serviced weights don't go with it

520-8

Tue, 16 Aug 2022 22:49:18 +0000

520-8 original tractor, not a clone. Has 2300+ hours but the motor sounds very good, no smoke or knocks and runs fine after it’s hot, starts quickly. I would guess this motor has been replaced at some point or it has been taken care of very well as it sounds/runs as good as any 500-1,000 hour 520 I’ve had. Left rear tire has an extremely slow leak and it could use new rear tires but they do hold air. 8 speed works great. Paint is average for a 520 of this age, some cracks peeling and light surface rust around the edges. Has new front tires just put on last weekend and new fuel lines & filter. $900 firm located just east of Columbus, IN 47203 (can arrange help delivering around Midwest Monday-Friday if you’re not in a hurry). Will hold with PayPal f&f payment or Venmo. My phone blocks unknown calls so leave a message or send a text before/after you call.

Briggs/Stratton 16 hp. SOLD

Tue, 16 Aug 2022 19:28:33 +0000

Briggs / Stratton 16hp I/C currently on a C 195. Runs great. 100.00

1988 310-8

Thu, 01 Jan 1970 00:00:00 +0000

The 42 inch mower deck is in very good condition, the bearings run free and quietly. Good battery. No smoke. Hood needs to be adjusted, because when it's fastened down, it prevents the throttle lever from moving fully open. Seat is taped on the sides but usable. There are some dents in the right fender. The volt meter is inoperative. There is no hour meter, so the hours are unknown.

The biggest issue is a problem in the safety switch circuit is preventing it from starting. It's almost certainly a loose/corroded/dirty connection or a bad safety switch. With the circuit bypassed, it starts and runs just fine. I can bypass the circuit to demonstrate the tractor, but since I won't sell it with the safety switches bypassed, I'm selling it as a non-running tractor.

Kohler Magnum 10 hp

Wed, 10 Aug 2022 02:00:59 +0000

We have for sale a complete, strong running Kohler Magnum 10 hp engine. See photos for model and serial #'s and also a short video of engine running. Carb shafts are tight, customer stated that it had a fresh set of rings about a year ago. Price is $200.00 cash at time of pickup. Located Sunbury, Pa. 17801. If interested, message me here or call / text during normal business hours. No shipping on this item.

20220703_173959[1].mp4

FREE 416-8 and C105 FPNW

Tue, 09 Aug 2022 14:09:58 +0000

These Wheel Horsies were given to me by an elderly gentleman who was being pestered to get them out of his garage. I didn't need them but hauled them away as a favor. Both tractors are a bit rough. The 416-8 is missing the carb. (previous owner removed it to overhaul it and lost it)

The seat pan on the 416-8 is rusty but there. The seat pan on the C105 is cracked and broken (surprise surprise) it is, however, all there.

There's a loose hitch and two mule drives. Free to a good home or they'll have to be discarded.

~Bill Winn

50" 5xi & Long Frame Grader/Belly Blade

Mon, 08 Aug 2022 23:54:58 +0000

50" grader/belly blade that originally was on my 520xi and then on my C165. How you may ask? Well, It has a second mounting rod welded in front of the 5xi mount so it also fits C/3/4/5 series tractors as well. In addition to that, it has a removable wear bar/cutting blade on one side of it so you'll have long life out of this without flipping the blade over. New paint was applied a few years ago but has wrinkled in a few places over the years despite it only being stored inside. Not a deal breaker if you ask me. I frequently travel to Grand Rapids, Marshall, and Dowagiac so I could meet up along the way. Thank you for looking! $400

Rear Bagger System

Mon, 08 Aug 2022 23:36:10 +0000

Here is a complete and fully functioning bagger system from my 520H and 48" deck. The only downside to the bagger system are two small holes in one of the bags which could very easily be patched up with some duct tape of your favorite flavor. The drive pulley on the deck can be yours if you can remove it. You get the bagger frame, two bags, impeller assembly, deck bracket, chute and the bracketry that attached the bags to the rear of your tractor. I've been told this system will also work on 42" decks but please confirm that. I live in Kalamazoo but frequently travel to Grand Rapids, Marshall, and Dowagiac, Michigan. Thank you for looking!

Wheel Horse Parts Lot....

Sun, 07 Aug 2022 17:37:41 +0000

Wheel Horse Parts Lot....1 Mule Drive w/Belt , 1 Muffler Heat Shield , 1 Pair 42" SD Deck Covers , PTO Clutch Disk , 2 Implement Cable Tubes , 1 Deck Height Adjuster , 2 Seat Gas Tubes....All Parts in Good Useable Condition...85.00 Takes All...Pick Up Only. Thanks.

Wheel horse rj-58 barn find

Sun, 07 Aug 2022 03:13:03 +0000

1958 Rj-58 serial # 6749 with tag intact .

This came from a gentleman his uncle owned it since new . It was driven into the barn running, and put up on the shelf 14 years ago . It has great compression and spark . I haven’t dug into it any further . One front rim has some bad pitting / rust , air cleaner was missing .

$750

can assist with shipping

location : Clarksville Tennessee

(860) 681-3610

Kohler K241 10hp complete & nice $200

Mon, 01 Aug 2022 22:23:01 +0000

Kohler k241 10hp - originally off one of the "C" Wheel Horse tractors from mid/late 70's and is complete to bolt right back on to a WH. Course this engine fits MANY other applications.

Bought tractor with this engine running, but had 16hp that I wanted to replace it with. Sat engine in corner some 10yrs ago, and finally decided to ck it over and if good sell it. Opened engine up and inspected/measured components .... quite a surprise! Crankshaft factory spec is 1.50, this measured at 1.4999!! -- Cylinder spec is 3.250, this measured at 3.250!! This is a NICE engine. Bought new gasket set and put it back together.... (coil not orig, no carb filter or flywheel screen)

Obviously shipping would be $$$ --- I'm located near Shreveport La (bout 5 mi from Tx line & 50 mi from Ark)

Can hear it run.... Asking $200

42” Rear Discharge Mower Deck for E-141

Sun, 31 Jul 2022 17:46:37 +0000

42” Rear Discharge mower deck for E-141 electric tractor. Blades are driven by three electric motors. Will not work with belt.

Excellent condition. Runs and cuts as it should.

$250 firm.

PM me if interested. Pick up only. SE Michigan.

***Decided to keep it - no longer for sale***

520-H with tiller for sale

Sat, 30 Jul 2022 15:59:15 +0000

Newbie here and I have a 520-H that runs, but needs some TLC and some minor things fixed and/or adjusted. It comes with a like new tiller that I believe has only been used once and has paint still on the tines. I am the 2nd owner and I have personally never used the tiller. I am selling my previous home that I rent and where it has been stored. My current home's yard just isn't big enough to use a rider and I need to find a new home for it. I want to sell them together to simplify and I need them gone in the next 2 weeks. Please reach out with any questions and I'll do my best to answer. I am definitely not as knowledgeable as most of you on this forum, but figured somebody would like to fix it up, part it out and/or needs a tiller. Please email or text.

seat pan&seat

Tue, 26 Jul 2022 22:45:22 +0000

pan is a little rusty but solid seat is new never used

RJ 59 for sale

Mon, 25 Jul 2022 20:52:22 +0000

Friend found this in barn, unused for over 25 years - was family mower before that. Pics show current condition, all cleaned up. Has all engine shrouds, primary drive belt guard, exhaust guard (only pictured in barn find shot) New muffler and exhaust. new sediment bowl, pep-cock and fuel lines. Carb rebuilt. New primary drive belt. Starts, Runs, Drives, Turns and Stops. Will wheelie in 2nd/3rd gear. Original Kohler K91 engine. Mower deck is still untouched - looks complete except for PTO belt guard. Last pic shows original barn condition.

I need the room. I have 7 other machines and although this one is pretty cool, the others have more use to me.

Wheel Horse cart

Mon, 25 Jul 2022 13:00:35 +0000

I have a Wheel Horse model 7-2211 yard trailer for sale. This trailer Has been repainted by the previous owner. It is not a show piece but with that being a said it is a solid trailer that would be a good worker. This trailer would be great for someone that wants one that looks decent and isn’t afraid to use it like it should be used. My price is O.B.O. for it. Feel free to ask questions and I can send more pics of it through text or email. I prefer texting or email but will accept calls on it.
Thanks-

Tristen

Tecumseh H60 cam and flywheel

Sat, 23 Jul 2022 22:57:51 +0000

I found these laying around in the shop from an H60 that I parted out...

These are the last 2 parts from the engine.

Cam and flywheel both are in excellent condition...

1971 Wheel Horse Bronco 14

Sat, 23 Jul 2022 18:26:19 +0000

I was planning on restoring this 71 Bronco after I retired. However, we have decided to move south to be closer to our daughter and I will have no need for the mower/snow thrower there. My late father purchased this Bronco new in 1971 and we used it mainly for snow removal. It has been sitting in my shed for several years and has a lot of surface rust, but I am certain anyone with a little skill can get it sanded and repainted to that beautiful Wheel Horse red! Tires hold air, everything works, even the cigarette lighter. I do think the carb either needs adjusted, or more likely rebuilt, as it spits and sputters a little. Everything is original that I am aware of with the exception of a couple nuts and bolts. I recently replaced the air filter, fuel filter, and changed the oil. That is the only maintenance I have done. The enclosure needs a little work on the vinyl (mostly the front piece) and the plastic windshield is cracked. Other than that, I have all the pieces to the attachments - at least whatever was in my dad's yard barn when I took it out to bring it to my house. I MAY have overlooked the hubcaps, but I really don't recall ever seeing any on my Bronco. I will look again.

Misc Horse Parts

Wed, 20 Jul 2022 13:56:47 +0000

Shown are random used refurbished horse parts.

Buy one or all.

753 With Snowblower

Mon, 18 Jul 2022 11:41:34 +0000

Wheel Horse 753 with snowblower attachment. Runs and drives. Has nice hood. Someone has installed transmission from newer model so it has longer rear axles and larger drive pulley making it drive slower.

Asking $750 located in South Haven,MI

Will sell snowblower attachment seperate for $200 but tractor is not available without it.

1973 GT14 Package

Sun, 17 Jul 2022 20:34:15 +0000

1973 Wheel Horse GT14 package includes tractor with 3 point hitch, mower deck, rear tiller for 3 point, dozer/snow blade, soft cab and box of assorted pieces parts. This project has been fighting with me and I'm out of time and patience due to other more pressing projects. Engine will fire if fuel is poured into spark plug hole, so it does have spark. No battery. Package deal only. Cash only, no trades. $1200 obo.

1997 Toro Wheel Horse 520-H

Fri, 15 Jul 2022 23:24:47 +0000

Selling my 520-H. It runs great and everything works as it should. It has 409 hours. Comes with a 48" Deck which cuts quietly.

Awesome 520H with snowblower, cab ++

Thu, 14 Jul 2022 19:37:26 +0000

Awesome 530H with a 42” rear discharge deck, like new 2-stage snowblower, mid mount grader blade, plow(s) and a like new full cab enclosure- in PA still to be picked up, wheel weights as seen in the pics and a custom heavy duty full-size receiver hitch from Wheel Horse Parts and More, new At tires. I love this tractor but just had the opportunity to get a Bolens compact tractor/loader but don’t have the room for both and need to recovers the money from buying both.

I won’t have the cab for a few weeks, bought and paid for but still sitting in PA, so would sell everything for 2400 less cab then I’ll sell the cab for an additional $500, exactly what I paid for it, separate when I pick it up.

I will find and get another but maybe something like an 857 with less features and electrical stuff

Wheel Horse C-105

Thu, 01 Jan 1970 00:00:00 +0000

Selling my Wheel Horse C-105. All original paint besides wheels. Runs excellent.

Cast Iron Rear Wheel Weights

Sun, 10 Jul 2022 19:40:02 +0000

Price is for pickup. Will ship for $300. Prices are firm.

416-8

Fri, 08 Jul 2022 04:39:33 +0000

91 800+ hrs 42"deck has a patch will include another deck serviced runs good

K161 Tins

Thu, 01 Jan 1970 00:00:00 +0000

K161 Tins in excellent condition

K161 cast iron exhaust manifold and muffler

Thu, 01 Jan 1970 00:00:00 +0000

Cast Iron exhaust manifold with muffler. Muffler has a couple of holes in the grid.