Adjusted price to what it cost me not looking for profit.

* Only 236 hours
* 14 Hp kohler 
* Reliable 8-speed cast iron rear end
* 48” Reinforced side discharge mower deck
* Well maintained — everything works as it should
* New rear tires recently installed

This is a solid, dependable tractor built to last — the kind you buy once and keep for years.

💲 Price: $2,850
📞 860_681_3610
📍 Location: Southington, Connecticut

Can be delivered to PA show 

Pictures show about as much as I know.

Picked up with a box of random parts and thought someone here would use before discarding...

It shows 766 hours on the working hour meter

I had it running in the fall but it smokes and doesn’t have much power. The rear tires are good but one front needs a tube.  The headlights work, and the hydro is strong when it was running. It also has a new condenser, rebuilt metal fuel pump, and a new battery. This definitely needs some work but I don’t need anymore projects right now. 

$250.00 OBO

  $75 or make an offer.

Pickup in Andover Ct.

I would consider a trade but you would really have to tweak my interest. 

Something is screwed up with loading pictures right now so only one for now. The others errored out and this one took about 15 minutes to load. 

Photo is from a few years ago. Since then I replaced the piston and rod. Reinstalled the engine but never got it up and running.

Hood and fuel tank are off as well as the sheet metal floor board. Snow blade and frame are separated from tractor.

Have original seat (upholstery is very bad). 

My Mom bought this tractor in the mid 60's and my brothers and I mowed our two acres with it until we replaced it with at 312-8 in the 90's

Would like to see it go to someone who wants to get it running or needs parts.

It has the Tecumseh 10HP horizontal shaft engine with magneto. Hydro static drive. No mower deck. Tire Chains.

Location NE Ohio

1973 16 HP horse with FEL & weight box (box just sandblasted & painted) Seat has a single 2 - 3" tear, taped. It's got a (42?" ) deck & mule, and the FEL stands go with it.

I'm taking the new rear AGs & weights off and putting turfs back on.

Recent service includes trans service (Wix filter), oil change, new plug, new choke cable, carb cleaning, and FEL fluid change. 

I also have a 2nd frame/body to include.  Needs a headlight, I believe I have it.  Driving lights on FEL.

NOTE:  I need time for my hand/wrist to heal before I can swap the rear wheels and tires.

EDIT:  I added photos of the wheels and tires that will go on the back of and a couple of partial photos of the repainted weight box.

9

K91 #18, c234253 The engine had a welded pulley on a tapered shaft on a 400. Engine was parted out.

K181 #22, 4147804 I believe it was original on my 854. The engine ran good but was very tired.

K341 #30, c275369 From the 341 I put on my 76 a gazillion years ago. Again, it ran good but was very tired.

All three would likely be fine as is but I would strongly suggest throwing a rebuild kit in them. 

$100.00 shipped to you. USPS money order so I don't have to drive 37 million miles to cash it. 

Free shipping. 

 These steel narrow front garden tractor wheels are hard to find, they were used on Wheel Horse, John Deere, Simplicity, Sears Suburban, & Cub Cadet small tractors.

 They were sandblasted and epoxy primed years ago but now show a little aging from being in storage for years.

Asking $49.00 for the pair, O.B.O.    Sold!

Call Tim @ 1-313-460-8858 

·        Wheels – 12” x 8” Silver/Grey Wheel Horse Garden Tractor wheels, they are in good usable condition.

·        Tires – Carlisle Turf Saver 23 x 8.50 – 12, they are in fair condition, good thread, but showing signs of dry rot. They are still usable.

Asking $49.00 for the pair, O.B.O.

Call Tim @ 1-313-460-8858 

Call Tim @ 1-313-460-8858

This 48” Mowing Deck is in Very Good Condition, 3 Blades, Side Discharge, No Holes, or Rot.

It should fit all C & B Wheel Horse’s, but as it has been in storage for years.

This unit is in Great Shape with very little use.

Asking $149.00 O.B.O – Call Tim @ 1-313-460-8858 

Model Number – 79362

Serial Number - 240000169

This Snowblower is in Excellent Condition, 36” Wide Single Stage with the Tall Discharge Shoot.

 It should fit all C & B Wheel Horse’s, I do have the lift bar, but as it has been in storage for years, I do not have the handle for rotating the shoot or the drive belt.

This unit is in Great Shape with very little use.

Asking $275.00 $249.00 $229.00 O.B.O – Call Tim @ 1-313-460-8858    SOLD

Description:

• 1 is a cleaned and painted frame, front axle and wheels, rear axle with Eaton 1100 Hydro, coms with a box of miscellaneous hardware from when I disassembled it for paint. Asking $59.00 O.B.O. (Note: comes as seen in photos)
• 1 is a mostly complete C175 Auto minus motor and sheet metal, has the Eaton 100 Hydro, dash, & wiring all intact. Asking $59.00 O.B.O (Note: comes as seen in photos) 

If you're building or maintaining a C Series Wheel Horse, or needing a rear axle or Eaton 1100 Hydro, there is tons of usable parts on these two chassis & frames.  

Open to reasonable Offers, Asking $59.00 Each O.B.O.

Call Tim @ 1-313-460-8858

This is one attachment I’ll probably kick myself for getting rid of, because it works so grade!  
 

Three position head, mid mount, works on long or short frame machines.