1986 Wheel Horse 420-LSE – All Original Condition

For sale is a very nice, all-original 1986 Wheel Horse 420-LSE. The tractor currently has 474 hours and everything is operational and functioning as it should.

This is number 82 of only 200 produced, making it a particularly desirable and collectible Wheel Horse. It still retains its original non-reinforced 48-inch mowing deck.

The tractor is very presentable and has been well preserved in its original condition.

Price: $6,500
Location Connecticut

Any questions, contact me at (860) 681-3610.

Up for sale is a 2004 Wheel Horse 315-8 in all-original paint. This tractor has only 490 hours and is equipped with a 15 HP Kohler Command engine, a 48-inch mower deck, and an 8-speed cast-iron Uni-Drive rear end.

This is a solid, well-built machine that, with proper care and maintenance, should provide many more years of service. This is not your typical box-store lawn tractor—it’s built tough and made to last.

The tractor runs and operates as it should with no known issues. A great machine for someone looking for a dependable, heavy-duty garden tractor.

📞 860-681-3610

Nice tractor, bought it from Spin Jim a few years ago and he really took good care of it.  Starts right up and runs great.  Rear weights and chains for both wheels go with it.  For another $100.00 I'll throw in the 42" snow plow.

Happy to answer any questions.  

IMG_3438.HEIC

Selling a one owner garage kept Mower and serviced by Mainline Mowers over the years and I have decided to use a lawn service.

 It is an original, heavy-duty 1988 Wheel Horse 416-8 garden tractor with the 16 HP Twin-Cylinder Onan Performer engine and the coveted 8-speed manual Uni-Drive transmission.

Original Hobbs meter shows only 649 total hours. Extremely low use for a 1988 commercial grade tractor.

Currently a non-runner. It was professionally serviced and ran great last season, but we contracted out our lawn care to a service and let the tractor sit.

 Tried starting it and it turns over won't fire up. The battery is weak from sitting, and it likely needs the old fuel drained and the carburetor cleaned. It turns over but needs a little TLC to get back to 100%.

Complete with mid-mount cutting deck. The sheet metal is straight, and the original red paint and hood decals are well-preserved for a 1988 model. Tires hold air great. Garage kept.

Typical wear for its age—the vinyl seat is split and the steering wheel has tape, but the bones of this machine are solid iron.

Perfect weekend project for a collector or Wheel Horse enthusiast who knows how to clean a carb and jump a battery.

Terms: $475 or best offer. Cash only, local pickup. You will need a trailer/truck to load.

Never used, still in excellent original condition after 36+ years in storage!

This is a genuine OEM Wheel Horse 42” rear discharge mower deck (model 05-42RK01) from 1988. It was part of an unopened bundle with a 520-H tractor and snowblower that sat in a dry barn. The deck itself has zero hours, no rust, no wear, and looks essentially new. All original paint, decals, and components intact.

•  Perfect for Wheel Horse 200-series tractors (e.g., 252-H) or compatible models.

•  Complete with original hardware and components.

•  Great upgrade or replacement for classic garden tractors.

Price: $1,000 OBO (local pickup preferred in central Massachusetts area – Millbury/Worcester region). Cash or verified payment.

Serious buyers only – this is a rare true barn find in untouched condition. Message with any questions or for more photos!

Stored indoors, not original paint, w/ 42” rear discharge deck.  The deck has had some repairs but is operational.  Needs a battery.
 

Motor has an oil leak which led me to park it.  I last ran this tractor about 5 years ago and have not touched it since but has since been stored indoors and I had intentions to restore it someday.  It has been in my family and passed down since it was bought new.  I’d like to free up space now.
 

I’m located in Mineral Springs, PA just off interstate 80 and tractor/deck would have to be picked up. 
 

If interested in further details or images please send an email and we’ll go from there. Thanks
 

All engines are torn down to the bare block. 
If I don’t have your specific engine in stock let me know. I don’t cut corners with my rebuilds. All work is done to professional standards.
I no longer stock or rebuild twin cylinders. I no longer stock or rebuild k91, k161 and k181 engines.
Contact me via PM with any questions.
Located in Mechanicsville, VA.

I can't bring it to the show (not enough room in my truck and I can't pack like pullstart😀).  However, if you live in the Northeast and are going to/from the show, I am 3 miles off I-81 (exit 211) north of Scranton

1975 C-120 Special, 8-speed (Model 1-0375, Ser. # 133357). Running (no smoke) 12 hp Tecumseh (Model HH120-120180E, rebuilt 1986). Rebuilt carb, new fuel pump, and new ignition module (in 2006). Good used replacement tank, original tank is included in the sale.  Brand-new battery, fuel filter, and shutoff valve installed 5/26.

Solid 42” side discharge deck (Model 5-1010) bearings replaced in 2005. Extra set of Gator mulching blades and spare hi-lift blades included. Deck works as it should and is ready to cut.

42” snow/dozer blade (Model 86-42BC01) with Rear weights, tire chains and hardware. Blade angles left and right and lifts correctly and is ready to plow.

Parts: 4 NOS belts and 2 good used belts, NOS taillight lenses, used starter, used ignition module, more (see pic).

1975 C Series Owner’s manual, 1975 WH accessory catalog, 5-1010 deck manual, original HH-120 manual, updated Tecumseh HH-120 technicians handbook.

Selling entire package for $300 Or Best Offer.

Will deliver within 50 miles of zip 18064. Delivery over 50 miles is negotiable.

Please PM to contact

New piston, rings, rod, valves, guides, seals and gaskets.

Located in Mechanicsville, VA. 

800.00 no core required. 

Complete  K321 drop in ready wheel horse spec k321. This engine has been torn down to the bare block cleaned and Bored .010 over, crank ground .010, valve seats ground, head decked, new carburetor, new piston, rings, rod, valves, guides, seals and gaskets, air filter, plug, fuel pump, points and condenser. Add oil and it’s ready to go. 
975.00 no core required. 
 

Will not ship, quite heavy, unless you pay shipping costs.  

Chuck.

manual transmission 

Needs a few minor fixes to get it up and running, I just don’t have the time to work on it

one owner for 40+ years 

$375 obo

Any interest in 60" finish mower for a D series.  Bought it years ago went over it new seals a couple new bearings belt etc,  But my D would over heat the tranny.  So I put it under a bench.  By the time I overhauled the D200 hydro I had gotten a finish mower for my Case VAC so this deck has sat for many years in the shop. It is complete with PTO shaft and coupler and leveling chains. There is a small piece of side guard missing.  Flat steel would be easy to fabricate.  Didn't really affect mowing performance.

Can bring to the big show.

One owner, runs ok.  Location is Kerrville TX,  60 miles nw of San Antonio.  Contact Sam by email

This is a new seat that I purchased for a project tractor and never used, it is in Perfect as New Condition.

I have used this seat on a few Wheel Horse tractors, and they have been a perfect fit and look great.

This is a Universal fitment seat; it has multiple mounting holes and mounting patterns for fitment on most Graden Tractors and Riding Mowers.

$49.00  Call Tim @ 1-313-460-8858     (Local Pick-Up Only, No Shipping)

48" Mower Deck for Xi Series Tractors. Brand New, N.O.S.

WHAT'S WRONG WITH THE TRACTOR: Needs new clutch safety switch. Can bypass. Backfires once when turn the tractor off after mowing.

HAVE PICS but phone will not allow me to upload to website. Can send via email if interested.