hobbyhorse 0 #1 Posted July 8, 2009 Anyone have a picture of how the cable for the hitch is routed over the transaxle of a 1054A Share this post Link to post Share on other sites
Lane Ranger 10,472 #2 Posted July 8, 2009 This photo shows a 1054 with a cable hooked up to a slot hitch on the back of the tractor. It is not a close-up but the cable runs through a tube from the left in front to the rear slot hitch. This is the back of a 1054: This is another shot: This is a 1054 A with the led tail light above th tool box: The final shot is of the 3/4 inch by 6 3/4 hitch pin you can get to make changing hitches easier than using the original 1054 pin with the e clamps on each side of the original hitch pin. This is a good upgrade. You can by the hitch pins in TSC for about %6 dollars. Share this post Link to post Share on other sites