Recently Browsing 0 members
No registered users viewing this page.
By Lane Ranger
If anyone has a HL-5 Headlight setup on their Wheel Horse I would appreciate some help on getting the dimensions of the u-shaped pipe/tubing that the headlights attach to.
I decided that I can make a couple sets for our Lawn Rangers by using conduit and steel plate. I have some chrome headlights that will work with no probelm to the tubing.
The location of the muffler/exhaust on the tractor suggest the length of the tubing and angle has to be under ten inches to avoid any problem being close to the heat of the muffler and exhaust pipe.
Any help with this information would be appreciated.
I came across what I believe to be 60s headlights that were attached to the hood of a 1960 Suburban. The seller would not sell me the headlights separately so I bought the Suburban. The only identification on them is stencilled on the back. One headlight reads "PMCo 401" and the other reads "PMCo 402".
Can anyone shed some light on my purchase?
The Redsquare Forum is "Priceless" because of its members!